Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAP, PROTECTIVE, DUST

Active
SPE7M4-26-Q-1018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-Q-1018, is for the procurement of 424 protective dust and moisture seal caps, identified by NSN 5340-00-208-2195. The item is classified as a commercial product and must adhere to specific technical and quality requirements, including DLA packaging standards and MIL-STD-130N for identification marking. Critical item source inspection is required for this procurement. The contract mandates strict environmental compliance, specifically prohibiting the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors. Additionally, the item must not utilize Class I ozone depleting substances. Performance is centered in Jacksonville, and responses are due by September 10, 2026.

General Info

DoD seeks 424 protective seal caps by September 10, 2026, in Jacksonville.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

N/A

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Freddie Vazquez
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP, PROTECTIVE, DUST AND MOISTURE SEAL:
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
WSDC 01F Special Project NSN.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM DOES NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES
PER DLA MEETING, 3-4 AUG 93, SUBJECT: DLA TECHNICAL/STANDARDIZATION
MEETING ON AUTHORITY TO IMPROVE CUSTOMER SUPPORT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
ADEQUATE DATA FOR NSN/Part Number: 5340-00-208-2195 Quantity: 424 HD

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M3-26-Q-0202
This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M3-26-Q-0202, is for the procurement of 13 electromagnetic relays, identified by NSN 5945-01-579-6583. The contract requires delivery within 64 days after the order is received, with the place of performance located in New Cumberland, Pennsylvania. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any non-accepted supplies. The response deadline for this solicitation is September 18, 2026.
Relay and Industrial Control Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333923
New
DIBBS
ACCUMULATOR, PISTON
Solicitation # SPE7M4-26-T-380W
This contract is for the procurement of two piston accumulators, identified by NSN 2030-01-214-8271 and Parker-Hannifin part number 810338. The items are designated as critical application items and must be permanently stamped with OIL and GAS at the appropriate ends. The agreement specifies a delivery timeframe of 146 days after order, with a required delivery date of September 25, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
TUBE AND FITTINGS, METALLIC
Solicitation # SPE7M4-26-Q-1019
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of two metallic tubes and fittings under part number 4710-01-261-4612. The contract is a total small business set-aside with a delivery requirement of 360 days after order. The agreement is subject to strict technical and quality standards, including DLA packaging requirements, government first article inspection, and configuration change management. It also mandates compliance with Cybersecurity Maturity Model Certification Level 2 and strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M3-26-Q-0199
This contract, solicitation number SPE7M3-26-Q-0199, is for the procurement of electromagnetic relays under NSN 5945-01-325-2818. The requirement consists of two line items totaling 38 units, with 11 units destined for DLA Distribution San Diego and 27 units for DLA Distribution Jacksonville. The pricing is established as Firm Fixed Price, and the delivery schedule is set for 515 days after the order is placed, with a required delivery date of February 4, 2028. The items are designated as critical application items and must comply with specific technical standards, including MIL-V-81995 and the Qualified Products List (QPL). Strict adherence to packaging and marking standards is required, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IPC/JEDEC J-STD-609 for component lead finish identification. The contract also incorporates DLA master list technical requirements and specifies that covered defense information may apply.
Relay and Industrial Control Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-380P
This contract is for the procurement of 37 nonmetallic hose assemblies under solicitation SPE7M4-26-T-380P for the Department of Defense Fluid Handling Division. The items must adhere to specific technical data packages and reference drawings, including MIL-DTL-13444J and SAE J516-2021. A critical requirement is the use of components from Qualified Products Lists or Qualified Manufacturers Lists. The items are designated as Type I with a non-extendable shelf life of 120 months, requiring strict shelf-life markings including cured and expiration dates per MIL-STD-129. Quality assurance is governed by ISO 9001:2015 standards, with inspection and acceptance occurring at the origin. Packaging and palletization must comply with DLA requirement RP001 and MIL-STD-2073-1E. Delivery is set for 140 days after order, with a required delivery date of April 13, 2027, shipping FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
MANIFOLD ASSEMBLY, HYDR
Solicitation # SPE7M3-26-T-8816
This contract is for the procurement of two hydraulic manifold assemblies under solicitation SPE7M3-26-T-8816 for the Department of Defense Fluid Handling Division. The items must be manufactured according to basic drawing 98748 and part number 200639118-10, with a required delivery date of September 4, 2026, and a delivery window of 20 days after receipt of order. Shipping is FOB Origin to a destination in Geilenkirchen, Germany. Compliance requirements include CMMC Level 2 self-assessment, oxygen cleanliness standards, and adherence to AS9100 or ISO 9001:2008 quality systems. The contractor must follow specific technical notes including MIL-PRF-8625 and AS5174, and ensure the material does not use Class I ozone depleting substances. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, specifically including oxygen clean packaging and marking.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M4-26-T-380M
This contract is for the procurement of 15 units of pipe to tube elbows, identified by NSN 4730-01-566-0010 and King Nutronics Corporation part number 3731-41-11. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-380M. Delivery is required within 168 days, with a need ship date of March 2, 2027, and a final required delivery date of March 28, 2027. The items are designated as critical application items and must comply with specific technical and quality requirements, including the prohibition of intentionally added mercury compounds per NAVSEA 5100-003D. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Shipping is FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
FLANGE, PIPE
Solicitation # SPE7M3-26-T-8813
This contract is a solicitation from the Department of Defense Fluid Handling Division for the procurement of seven pipe flanges, identified by NSN 4730123929148 and part number 864063203. The order is managed under solicitation number SPE7M3-26-T-8813 with a required delivery date of January 26, 2027, and a delivery window of 112 days. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing packaging standards RP001 and ASTM D3951, as well as marking and labeling per MIL-STD-129. Quality assurance is governed by certificate of conformance procedures unless otherwise specified. The contract specifies a zero percent quantity variance and designates the point of inspection and acceptance as the destination.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7M4-26-T-380N
This contract is a solicitation for the procurement of 2,148 units of packing retainers, identified by NSN 5330-00-166-9166 and part number 68C6939. The item is classified as a critical application commercial item and must be manufactured according to TDP Rev B Gen 2. The procurement is conducted under full and open competition with a delivery timeframe of 150 days after order, with a required delivery date of March 25, 2027. The contract mandates strict quality and packaging standards, including compliance with SAE AS9100 and MIL-STD-129 for marking. Because the item is susceptible to ultraviolet rays, it must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Inspection and acceptance will occur at the origin, and the final shipment is destined for the DLA Distribution Depot Hill at Hill AFB, Utah.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNECT
Solicitation # SPE7M3-26-T-8810
This contract is for the procurement of five quick disconnect plugs, identified by NSN 4730014523470 and Swagelok part number B-QC6-BP. The items are designated as critical application items and must be delivered within 20 days. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically Davis Monthan AFB in Arizona. The supplier must adhere to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. All technical and quality requirements are governed by the DLA Master List. Shipments must be sent via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7M4-26-T-380V
This contract is for the procurement of three shoulderered shafts, identified by NSN 3040000184725 and AMETEK part number 1001194. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-380V. Delivery is required within 112 days, with a need ship date of January 5, 2027, and a final required delivery date of January 31, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. Inspection and acceptance will take place at the destination.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7M4-26-Q-0977
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details