Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPACITOR, FIXED, CER

Active
SPE7M5-26-T-367CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 25 fixed ceramic capacitors under NSN 5910-01-252-9694 and part number CDR21BG620EFTR, compliant with MIL-PRF-55681/5F Revision F dated 03/24/2025. The item must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R identifiers, with controlled revisions based on solicitation or award dates. Manufacturing sources are restricted; materials produced by American Technical Ceramics (ATC) with lot date codes between 9449 and 9822 are prohibited due to a GIDEP alert. The use of ozone-depleting substances in any phase of production is forbidden unless explicitly approved in writing by the Contracting Officer, and this restriction does not apply to commercial items as defined by FAR 11.001 or part-numbered-only items. Packaging must conform to MIL-STD-2073-1E, with unit packaging marked per MIL-STD-129 and additional lead finish labeling per IPC/JEDEC J-STD-609, requiring clear identification of lead content on each unit pack. All items must be delivered within 20 days to the designated destination in San Diego, California, FOB origin with zero variance permitted. Shipping must use traceable freight methods only—parcel post is prohibited—and special markings with code ZZ apply. The delivery schedule is tied to an original required delivery date of July 30, 2026, with inspection and acceptance occurring at the destination. The contract is issued under solicitation SPE7M5-26-T-367C, with specific federal and DoD oversight identifiers, and point of contact details provided for procurement inquiries.

General Info

25 ceramic capacitors, MIL-PRF-55681/5F, ATC lot prohibition, no ozone toxins, MIL-STD packaging, deliver to San Diego by July 30, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

BLDG 7, SAN DIEGO, CA, 92110, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-367C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPACITOR,FIXED,CER
CAPACITOR,FIXED,CERAMIC DIELECTRIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ANY MATERIAL MANUFACTURED BY AMERICAN TECHNICAL
CERAMICS (ATC) CAGE 29990 WITH A LOT DATE CODE
RANGING FROM 9449 THROUGH AND INCLUDING 9822
IS NOT ACCEPTABLE DUE TO GIDEP ALERT F3-A-99-01.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-55681/5F REVISION NR F DTD 03/24/2025 PART PIECE NUMBER: CDR21BG620EFTR
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-367C
SECTION B
PR: 7017722106 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722106 0001 EA 25.000
NSN/MATERIAL:5910012529694
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE7M5-26-T-367C
SECTION B
PR: 7017722106 PRLI: 0001 CONT’D
N66001
NIWC PACIFIC
53560 HULL STREET
SAN DIEGO CA 92152-5001
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N66001
NIWC PACIFIC
4297 PACIFIC HIGHWAY
BLDG 7
SAN DIEGO CA 92110
US
M/F: (TCN) N660016203FH54
RDD: 217
PROJ: NL1 TP 2
SUPP ADD: 1200 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 07
DIC: A4A DIST: 9B ADV: 26 FC: X3
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE7M5-26-T-367C NSN/Part Number: 5910-01-252-9694 Quantity: 25 EA Purchase Request: 7017722106QTY: 25 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M0-26-T-028D
The contract is for the procurement of three thermal resistors, identified by NSN 5905-01-453-6917, under solicitation SPE7M0-26-T-028D, with a required delivery within five days of award. The technical and quality requirements governing this acquisition are defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined based on whether the acquisition is simplified or large, with control tied to the solicitation issue date, award date, or any amendment date. Mandatory compliance includes the prohibition of intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except in specifically exempted cases such as functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or authorized chemical reagents by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary, in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all items must be physically marked as required. The offeror must submit a complete data package including specifications and performance data for both the approved and alternate parts, as no existing data is available. The contracting activity is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with primary point of contact Laurie Wassmuth, and the response deadline is August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M0-26-T-030V
The contract is for a single fixed wire resistor with part number 7S16A1640.1KILOHMSPORM0.05PCT and NSN 5905009017382, supplied by PRIME TECHNOLOGY LLC or SHALLCROSS INC DBA, meeting strict technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The item must be delivered within five days FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with additional lead finish identification required per IPC/JEDEC J-STD-609 on each unit pack. The delivery address is Fort Carson, Colorado, with shipments required to use the fastest traceable means—parcel post is prohibited—and all packaging must follow DLA packaging requirements. The item is designated for government use only, with a required delivery date of July 30, 2026, and procurement is managed under solicitation SPE7M0-26-T-030V by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-249R
The contract is for the procurement of three power transformers, identified by NSN 5950-01-736-4905 and part number 4072097-01, under solicitation SPE7M1-26-T-249R, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 239 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each, at a price of $3.00 per unit, totaling $9.00 for the three units, with no variance permitted in quantity. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA packaging requirements. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the same address used for freight shipping. The required ship date is April 14, 2027, matching the original delivery deadline. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. All transportation logistics are subject to DLAD procedural notes C19 and C20. The solicitation opened on August 4, 2026, with responses due by August 17, 2026, and is classified under NAICS code 334416 for transformer manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M1-26-Q-1329
The contract involves the procurement of 19 variable non-wire wound nonprecision resistors with NSN 5905-01-221-0620 under solicitation SPE7M1-26-Q-1329, which is a total small business set-aside classified under NAICS code 334416. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure—domestic or international—to foreign persons, including foreign nationals employed by U.S. entities, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Delivery is required within 175 days after order award, and the point of contact for the contract is Joseph Madjecki of the Maritime Supply Chain under the Department of Defense, with performance set at New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M5-26-T-366S
The contract specifies the procurement of one variable resistor, part number 5905-01-037-3387, under solicitation SPE7M5-26-T-366S, with a required delivery within 20 days of award and delivery terms FOB origin. The item must comply with DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit packaging configured for 100 units per intermediate container marked with package code U. All items must be marked in accordance with MIL-STD-129, and additional lead finish identification per IPC/JEDEC J-STD-609 is required on each unit pack. Mercury and mercury-containing compounds are strictly prohibited except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and naval chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment as defined by NAVSEA 5100-003D. The delivery destination is the USS Dwight D. Eisenhower, with shipments required to use traceable transportation methods and explicitly exclude parcel post. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List, and the revision in effect on the solicitation issue date governs compliance. The contract includes inspection and acceptance at destination, with zero variance allowed in quantity. The point of contact for inquiries is Jeanette Heisey, and the item is classified under NAICS code 334416 for active devices.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-028F
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910012529695 and part number CDR21BP102AGTR, governed by MIL-PRF-55681/5F Revision F dated March 24, 2025. The item must comply with all applicable technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-39028. The contractor is required to apply specific lead finish markings in accordance with IPC/JEDEC J-STD-609 on each unit pack, ensuring compliance with environmental and material attribute identification standards. The use of ozone-depleting substances is strictly prohibited in manufacturing or processing unless written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the product except under narrowly defined exceptions for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. The contract mandates delivery within five days of award, FOB origin, with no tolerance for quantity variance, and requires inspection and acceptance at the destination. Packaging must meet MIL-STD-129 marking standards, with special restrictions on shipping methods—parcel post is prohibited, and shipments must use fast, traceable freight services addressed to the Naval Supply Systems Command in Norfolk, Virginia. All items must be delivered by August 5, 2026, under solicitation SPE7M0-26-T-028F, with full and open competition applicable. The contract emphasizes strict adherence to environmental compliance, material restrictions, and precise packaging and labeling protocols, with direct oversight from the Department of Defense and the Maritime Supply Chain ESO Contracting Office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
COIL RF
Solicitation # SPE4A5-26-T-328V
The contract pertains to the procurement of seven units of RF coil, identified by NSN 5950-01-212-6288, under solicitation SPE4A5-26-T-328V, with a response deadline of August 12, 2026, and a delivery requirement 184 days after award. Technical and quality standards referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA specifications, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item is not required to have Item Unique Identification per the Service customer’s request, though other marking requirements under RQ017 must be followed, including physical identification and bare item marking. Government identification must be removed from any non-accepted supplies. Measuring and test equipment used in production must meet specified standards. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completed DOD training on export-controlled data handling, and formal authorization from DLA. The place of performance is Robins Air Force Base, Georgia, with primary point of contact, Renee Wassum, reachable via email and phone for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-225J
The contract solicitation SPE7M1-26-T-225J seeks 13 electrical coils identified by NSN 5950-01-227-4552 for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with a 168-day ADO delivery timeline culminating in a need ship date of January 19, 2027. Performance is governed by strict compliance with MIL-STD-2073-1E for packaging and preservation, requiring cleaning and drying without additional preservation or wrap materials, and MIL-STD-129 for labeling and barcoding, with all shipments marked for ocean transport via U.S.-flag vessels unless a waiver is secured through formal written request submitted at least 45 days prior to sailing. The contract mandates adherence to DFARS clauses including hazardous material identification under 252.223-7001, requiring submission of Safety Data Sheets and compliant hazard labels prior to award, and 252.247-7025 which enforces U.S.-flag vessel use for maritime transport and necessitates post-shipment documentation including ocean bills of lading and invoice compliance certifications. The contract is issued under FOB Origin terms with payment handled exclusively through WAWF using invoice types such as Invoice and Receiving Report or Invoice 2in1, and no pricing details are provided in the solicitation leaving the contract value undefined. The offeror must be registered in SAM.gov with a valid UEI and CAGE code and must represent their size status—small business or other than small—as well as any applicable socioeconomic certifications including WOSB, SDvOSB, HUBZone, or SDB status. The solicitation incorporates multiple FAR and DFARS clauses including equal opportunity requirements, combating trafficking in persons, employment eligibility verification, sustainable procurement, and whistleblower protections, with alternate language applied in several instances such as Alternate I to FAR 52.222-36 and Alternate II to FAR 52.227-1. Specialized clauses require disclosure of covered defense telecommunications equipment and supplier information, and contractor compliance with NIST SP 800-171 cybersecurity requirements for handling controlled unclassified information. Inspection and acceptance occur at the destination facility with the contractor bearing full responsibility for compliance with all technical, packaging, and documentation standards. Proposals must be submitted electronically via DIBBS by August 6, 20
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-366L
The contract is for the procurement of 106 shielding gaskets, electronic, identified by NSN 5999-01-341-6563, with a total estimated value of $7,796.00, split between two CLINs for 20 and 86 units respectively. Delivery is required by November 30, 2026, with a firm delivery location in Jacksonville, FL, and FOB Origin terms apply, requiring offerors to include all transportation costs to a contiguous U.S. destination. The solicitation, issued on August 3, 2026, with a response deadline of August 14, 2026, is managed by the Department of Defense’s Active Devices Division through the DIBBS electronic portal. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to contractors with approved JCP certification, completed DOD export training, and DLA authorization. All packaging and marking must comply with MIL-STD-129, RP001, and either ASTM D3951 for non-hazardous materials or FED-STD-313 with TQ IP025 for hazardous items, and barcoding must include NSN, contract number, and lot information. The contractor must adhere to NIST SP 800-171 cybersecurity requirements and DFARS 252.204-7012 for safeguarding covered defense information, and is subject to CMMC Level 2 certification for third-party assessment. The contract mandates use of WAWF for invoicing, requires submission of Safety Data Sheets, and applies FAR and DFARS clauses covering combating human trafficking, employment eligibility, sustainable products, hazard communication, cyber incident reporting, prohibited procurement from Chinese military companies, and whistleblower rights. Inspection and acceptance occur at the destination, and the government retains full authority over acceptance criteria. Offerors must provide UEI and CAGE codes, state their small business status, and affirm compliance with all applicable representations. No evaluation factors or award criteria are specified, and the basis of award will be determined by the contracting officer. All technical and quality requirements are derived from the DLA Master List, which takes precedence over commercial standards, and no formal attachments are listed, with reference materials incorporated by link only.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECE
Solicitation # SPE7M5-26-T-367P
This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367F
The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
RADOME, POLARIZER
Solicitation # SPE7M5-26-Q-0829
The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-367K
The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-367D
This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, T
Solicitation # SPE7M5-26-T-366Y
The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367G
This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0830
The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 444180
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-366W
The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.
Other Building Material Dealers

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SEQUENCING
Solicitation # SPE7M5-26-T-367L
This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-366U
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details