This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CAPACITOR, FIXED, ELE

Closed

SPE7M5-26-T-330QFederal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334416

New

DIBBS

Supply of Fixed Wire Wound Resistors (NSN 5905-01-061-5801)This subcontract involves the supply of five fixed wire wound resistors, identified by NSN 5905-01-061-5801, for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The components must strictly adhere to DLA Master List requirements RP001 and RA001, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 standards respectively. The contract requires full compliance with the Buy American Act and the Berry Amendment. Delivery of the five units is specified as FOB Origin to Hill AFB, Utah. The opportunity is managed by the Department of Defense under NAICS code 334416, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Fixed Wire Wound ResistorsThis subcontract involves the supply of five fixed wire wound resistors for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor is responsible for manufacturing or sourcing resistors that strictly adhere to NSN 5905010615795 specifications, with delivery terms set as FOB Origin to Hill AFB. Compliance with rigorous military and industry standards is required, including marking per MIL-STD-129 and unit package marking for lead finish according to IPC/JEDEC J-STD-609. Additionally, all items must be packaged in accordance with MIL-STD-2073-1E. The opportunity falls under NAICS code 334416, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Fixed Electrolytic Capacitor Supplier (MIL-PRF-39003)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Wire Wound Inductive Resistors (NSN 5905-01-061-5803)This subcontract involves the manufacture or procurement of five fixed, wire wound inductive resistors under NSN 5905-01-061-5803 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for ensuring all components meet strict technical specifications, including lead finish markings per IPC/JEDEC J-STD-609 and general marking requirements per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and RP001 standards. The agreement requires full compliance with the Buy American Act and DFARS Cybersecurity standards. The final deliverables are to be shipped FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 334416, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Fixed Ceramic Dielectric CapacitorsThis subcontract involves the supply of two fixed ceramic dielectric capacitors for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The required components must match NSN 5910015328148 and L3 Technologies part numbers 90-313-1 and G-3617. Performance will take place in Fallon, Nevada, under NAICS code 334416. The supplier must ensure strict adherence to IPC/JEDEC J-STD-609 and 29 CFR 1910.1200 standards. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment, specifically following DLA requirements RP001, RA001, RQ011, and RQ017. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing and Supply of Noninductive Wire Wound ResistorsThis subcontract involves the manufacturing and supply of fixed, wire wound, noninductive resistors for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for producing resistors that adhere to MIL-PRF-39009/2C(3) and MIL-PRF-39009E(5) specifications, with lead finish markings applied according to IPC/JEDEC J-STD-609. The specific deliverable is packaged resistors under NSN 5905015277634. The project is categorized under NAICS code 334416 and requires strict compliance with DFARS 252.204-7012 and 252.204-7009 regulations. Performance for this contract will take place in Tobyhanna, Pennsylvania. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Chassis Resistors (NSN 5905-01-718-9500)This subcontract involves the supply of seven chassis resistors under NSN 5905-01-718-9500 for the DLA Weapons Support Active Devices Division. The contractor is responsible for sourcing or manufacturing resistors that match Part Number FPA600 20K J or MC-041028, ensuring all units are delivered FOB Origin. Strict compliance is required regarding quality and environmental standards, specifically ensuring materials are free of hexavalent chromium and meet DLA Master List requirements. Additionally, the contractor must perform all packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance for this contract is centered in New Cumberland.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Wire Resistors (NSN 5905010619568)This subcontract involves the manufacture or procurement of 49 fixed wire resistors under NSN 5905010619568 for prime contractors supporting the DLA Weapons Support Active Devices Division. The contractor must ensure all units feature component lead finish markings according to IPC/JEDEC J-STD-609 and strictly adhere to the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance will take place at Hill AFB, with all deliverables requiring packaging and marking compliant with MIL-STD-2073-1E and MIL-STD-129. The contract falls under NAICS code 334416 and requires the delivery of 49 fully compliant, properly marked, and packaged resistors.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Fixed Wire Wound Resistors (NSN 5905-01-06-15799)This subcontract involves the procurement of five fixed wire wound resistors for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 5905-01-06-15799 and the DLA Master List of Technical and Quality Requirements. Additionally, the resistors must feature lead finishes marked according to IPC/JEDEC J-STD-609 and maintain full compliance with the Buy American Act and the Berry Amendment. The contract requires delivery of the components FOB Destination to Hill AFB, Utah. Managed under NAICS code 334416 for the Department of Defense, the solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Fixed Film Resistors (NSN 5905015450376)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacturing of Reactor Units (P/N 55-1881-1)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Fixed Wire Resistor Supplier (NSN 5905-01-061-9559)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract specifies the procurement of a fixed electrolytic capacitor with the NSN 5910-01-319-6789, identified as a commercial item, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The capacitor must not exceed nine months in age from the date of manufacture, and the actual manufacture date must be clearly marked on the item. It must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific lead finish markings per IPC/JEDEC J-STD-609 on each unit package, identifying lead content or lead-free status. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II with corresponding AQLs. The item is designated as a critical application part, and only approved part numbers from Cornell-Dubilier, Rockwell Collins, and Sprague Electric are acceptable. Packaging and preservation must conform to MIL-DTL-39028. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at the destination, and a 50-day delivery window from contract award. The unit of issue is each (EA), with 21 units required, and shipping must use the designated DLA Distribution Warner Robins address. The original required delivery date was July 6, 2019, with a need ship date of September 17, 2019, and the solicitation was issued under SPE7M5-26-T-330Q with a response deadline of July 27, 2026.

General Info

Procure 21 new electrolytic capacitors with strict packaging, marking, and age limits, approved vendors only, FOB origin, 50-day delivery.

Agency

Department Of Defense → ACTIVE DEVICES DIVISION

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

RFQ SPE7M5-26-T-330Q for DLA Land and Maritime

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 16

Solicitation

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Office AddressUSA

Contacts

Matthew Stanko

contact@example.gov

+1 (555) 000-0000

Full Description

CAPACITOR,FIXED,ELE
CAPACITOR,FIXED,ELECTROLYTIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
"ITEM SHALL NOT BE OLDER AT TIME OF DELIVERY
THAN NINE MONTHS FROM DATE OF MANUFACTURE.
THE ACTUAL DATE OF MANUFACTURE SHALL BE MARKED
ON THE ITEM BY THE MANUFACTURE."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
CORNELL-DUBILIER MARKETING INC 00853 P/N 101142U050AA2A
ROCKWELL COLLINS, INC. 13499 P/N 183-1467-080
ROCKWELL COLLINS, INC. 95105 P/N 183-1467-080
SPRAGUE ELECTRIC CO WORLD HQS 56289 P/N 602D190A1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE7M5-26-T-330Q
SECTION B
PR: 0078938844 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 0078938844 0001 EA 21.000
NSN/MATERIAL:5910013196789
DELIVERY (IN DAYS):0050
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-39028, FOR CAPACITORS. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association
SPE7M5-26-T-330Q
SECTION B
PR: 0078938844 PRLI: 0001 CONT’D
Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:09/17/2019 Original Required Delivery Date:07/06/2019
SPE7M5-26-T-330Q NSN/Part Number: 5910-01-319-6789 Quantity: 21 EA Purchase Request: 0078938844QTY: 21 Delivery: 50 days ADO