Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPACITOR, FIXED, ELE

Active
SPE7M1-26-T-210GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two fixed electrical capacitors with NSN 5910-01-641-7010 under solicitation SPE7M1-26-T-210G, with a delivery requirement of 20 days after order. The procurement is governed by DLA packaging and quality standards, which include technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific approved uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents designated by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all items must be physically marked according to bare item marking requirements. The offeror must submit a complete data package covering both the primary and alternate parts since no data is available for the listed item. The solicitation was posted on July 14, 2026, with responses due by July 27, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through Tara Halter, with performance designated to FPO, ZIP 09513.

General Info

Procure two capacitors under NSN 5910-01-641-7010, deliver in 20 days, no mercury except approved uses, mark and package per DLA standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

UNIT 100331 BOX 1, FPO, AE, 09513, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-210G for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Tara Halter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPACITOR,FIXED,ELE
CAPACITOR, FIXED, ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5910-01-641-7010 Quantity: 2 EA Purchase Request: 7015284959QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Supply of FAA-Certified Cable Reel (NSN 1680-01-688-9776)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-01ZJ
A cable assembly with the NSN 6150-01-555-8898 is being solicited under contract number SPE4A6-26-T-01ZJ for a quantity of three units. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 335932 and is categorized as a federal procurement. The request was posted on June 29, 2026, with a response deadline of July 7, 2026, allowing vendors a limited window to submit proposals. Performance location and point of contact details are not specified, and no set-aside provisions are in effect. The solicitation is accessible through the DIBBS system, where interested parties can review full requirements and submit responses.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-14AN
This contract is for the procurement of 100 feet of electrical insulation sleeving, identified by NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a critical application commercial item and must be manufactured by an accredited provider listed on the Performance Review Institute QML or QPL. It must adhere to SAE AS23053/1 Revision A standards and has a specified shelf life of 12 months. Key requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury or mercury-containing compounds. Delivery is required within 20 days after receipt of order, with a quantity variance allowance of plus 10 percent and minus 0 percent. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
CONDUIT, METAL, RIGID
Solicitation # SPE4A7-26-T-517E
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, POWER SUPPLY
Solicitation # SPE7L7-26-T-4552
Solicitation SPE7L7-26-T-4552 is a federal procurement request issued by the Department of Defense for four power supply adapters, identified by NSN 6130-01-616-4165 and L3 Technologies part number 60091820-000. The contract is managed by the DDSP New Cumberland Facility in Pennsylvania, which serves as the destination for both inspection and acceptance. The required delivery date is September 10, 2027, with a delivery schedule of 391 days after receipt of order. Shipping is designated as FOB Origin, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking and bar-coding, and RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Key regulatory requirements include CMMC Level 2 self-assessment, NIST SP 800-171 cybersecurity standards, and DFARS compliance regarding hazardous material labeling and the prohibition of certain internal confidentiality agreements. All technical and quality requirements are further detailed in the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4546
Solicitation SPE7L7-26-T-4546 is a small business set-aside request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of six power supply units. The required hardware is specified as part number 90-189-B, manufactured by General Digital Corp under CAGE code 1JA77, with the National Stock Number 6130-01-536-3312. Delivery is required within 20 days after receipt of order, with a final required delivery date of July 24, 2026. The items are to be shipped FOB Destination to the USS Chosin CG 65. The contract mandates strict adherence to quality and safety standards, including CMMC Level 2 self-assessment and the safeguarding of covered defense information. Technical requirements include the prohibition of intentionally added mercury, except for specific functional components, and compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via the DLA Internet Bid Board System by August 14, 2026, and must provide a Safety Data Sheet prior to award to be considered eligible. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
SLED
Fiber Optic Cable Supply and Delivery
Information Management

POSTED

about 19 hours ago

DEADLINE

in 20 days
View Details
NAICS: 335999
New
Federal
Electrostatic Discharge (ESD) Safety System IntegrationThis subcontract opportunity with the Department of Defense, specifically under FA5606 52 Cons Da Lgc, focuses on the Electrostatic Discharge (ESD) Safety System Integration. The scope of work involves the design and integration of power management systems, grounding points, and ESD-safe surfaces specifically for use within workbenches. The project is categorized under NAICS code 335999. Interested parties must submit their responses by August 31, 2026, following the posting date of August 14, 2026. Performance of the contract is associated with location 09123.
FA5606 52 Cons Da Lgc

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 335999
New
Federal
Supply of Therm-X Power Supply Units
Marsoc H92257

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
Federal
Uninterruptible Power Supply (UPS) System Supply
Nswc Indian Head Division

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
Federal
Sole Source CSS RS Microwave Triplexers
Solicitation # N6600126Q6292
The Department of the Navy, through the Naval Information Warfare Center Pacific, intends to award a noncompetitive, firm-fixed-price purchase order to RS Microwave for the procurement of Triplexers. This acquisition falls under NAICS code 335999 for Miscellaneous Electrical Equipment and Component Manufacturing, with a small business size standard of 600 employees. The solicitation, identified by number N6600126Q6292, was posted on August 14, 2026, with a response deadline of August 19, 2026. While the government intends to proceed on a sole-source basis, it maintains the discretion to consider bids or quotations from other responsible sources. The primary point of contact for this action is Andrew Cornwell, based out of the San Diego, California office.
Niwc Pacific

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
Federal
500 KVA Pad-Mounted Transformer - Seymour Johnson AFB, NC
Solicitation # FA480926Q1829
The 4th Cons Squadron of the Department of Defense is issuing a presolicitation under solicitation number FA480926Q1829 for a 500 KVA Pad-Mounted Transformer to be located at Seymour Johnson AFB in Goldsboro, North Carolina. This opportunity is designated as a total Small Business Set Aside under NAICS code 335999. The solicitation was posted on August 14, 2026, with a response deadline of August 20, 2026. Interested parties should refer to the provided salient characteristics document for technical specifications and may contact Peter Iannuzzo or Khadijah Jones for further information.
FA4809 4TH Cons Squadron Cc

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333912
New
DIBBS
FILTER ASSEMBLY, FLU
Solicitation # SPE7M1-26-T-243W
Solicitation SPE7M1-26-T-243W is a federal procurement issued by the Department of Defense Maritime Supply Chain for one Filter Assembly, FLU (NSN 4310-01-711-7657), identified as Rix Industries part number A77-19021. The contract requires delivery within 20 calendar days after the date of award, with an original required delivery date of July 29, 2026. Shipping is designated as FOB Origin, with the primary delivery address located at Submarine Base New London in Groton, Connecticut, and the final consignee being the USS IOWA. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and bar-coding. Special requirements include a total prohibition of Class I ozone-depleting chemicals and the mandatory submission of Safety Data Sheets for any hazardous materials. All electronic invoicing must be processed through Wide Area WorkFlow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including those regarding the Combating Trafficking in Persons, NIST SP 800-171 cybersecurity assessment requirements, and the use of U.S.-flag vessels for ocean transport. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS).
Air and Gas Compressor Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-246T
Solicitation SPE7M1-26-T-246T, issued by the Department of Defense Maritime Supply Chain, is for the procurement of three electromagnet relays (NSN 5945-01-088-1822). The requirement specifies a delivery timeline of 20 days after the date of award, with the final destination located in Zetel, Germany, and a transit point at Dulles International Airport, Virginia. The contract is designated as FOB Destination and requires the use of U.S. flag vessels for ocean transportation unless a formal waiver is granted. Compliance requirements are stringent, necessitating CMMC Level 2 certification and adherence to ITAR and EAR export controls for technical data. Technical data access is limited to contractors with approved US/Canada Joint Certification Program certification. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with specific lead finish markings per IPC/JEDEC J-STD-609 and hazardous material labeling per 29 CFR 1910.1200. Inspection and acceptance will be conducted by the government at the point of origin. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system.
Relay and Industrial Control Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335929
New
DIBBS
CABLE, RADIO FREQUEN
Solicitation # SPE7M1-26-T-247M
Solicitation SPE7M1-26-T-247M, issued by the Maritime Supply Chain under the Department of Defense, seeks the procurement of 500 feet of radio frequency cable (NSN 6145-01-515-6609). The requirement specifies the cable must be provided in one continuous length per 500-foot spool. Delivery is required within 149 days after the order is placed, with the place of performance and acceptance located at the receiving warehouse in Tracy, California. The contract is established as FOB Destination, and all invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements under RP001. Technical and quality standards are governed by the DLA Master List (RA001), and any alternate offerors must provide a complete data package for approved and alternate parts. Special attention is required for the identification and labeling of hazardous materials in accordance with OSHA’s Hazard Communication Standard and Federal Standard No. 313. Proposals must be submitted via the DIBBS portal by August 14, 2026, and include all necessary representations and certifications, including those regarding covered defense telecommunications equipment.
Other Communication and Energy Wire Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CUR
Solicitation # SPE7M1-26-Q-1392
This contract is for the procurement of one alternating current motor, identified by NSN 6105-01-228-1996 and part number 500826-4169. The agreement is established as a firm fixed price contract with a delivery timeline of 379 days after order. Inspection and acceptance will occur at the destination, with shipping directed to the DLA Distribution Depot in Bremerton, Washington. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. A critical restriction is placed on the use of mercury, which cannot be intentionally added to the hardware except in specific functional cases approved by NAVSEA. The item is designated as a critical application item and must comply with configuration change management and government identification removal protocols.
Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-Q-1390
This firm fixed price contract is for the procurement of three alternating current motors, identified by part number 6105-01-484-6451. The items are designated as critical application items and must adhere to technical data package Revision B Gen 3 and basic drawing 16236 RE-014846451. Delivery is required within 135 days after order, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. Strict environmental and quality compliance is required, specifically prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except where functionally required by NAVSEA specifications. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract also incorporates specific technical and quality requirements from the DLA master list, including the removal of government identification from any non-accepted supplies.
Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-246N
Solicitation SPE7M1-26-T-246N is a federal procurement issued by the Department of Defense through the Defense Logistics Agency Maritime Supply Chain for the acquisition of 107 fluid filter elements, specifically Parker Hannifin Corp part number SO-636CM (NSN 4330-01-544-3410). This critical application item is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998. The contract is structured as a firm-fixed-price acquisition with a required delivery date of January 1, 2027, and a delivery window of 139 days after the date of award. Delivery is specified as FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with NIST SP 800-171 cybersecurity standards. Additionally, the contract mandates strict adherence to hazardous material labeling per 29 CFR 1910.1200 and requires the use of U.S.-flag vessels for any ocean transportation.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-248G
Solicitation SPE7M1-26-T-248G, issued by the Department of Defense Maritime Supply Chain, is for the procurement of two alternating current motors, identified by NSN 6105-01-523-7170 and Howden American Fan Company part number A2A4W6MTR. The requirement is managed under NAICS code 335312. Delivery is required within 157 days after receipt of order, with a need ship date of January 19, 2027, and an original required delivery date of July 9, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling, including the use of 2D Data Matrix barcodes. Technical and quality requirements are governed by the DLA Master List, specifically referencing RP001 for palletization and RA001 for quality standards. Administrative requirements include electronic invoicing via Wide Area Workflow (WAWF) and compliance with various DFARS and FAR clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of certain telecommunications equipment. Proposals were required to be submitted electronically via the DIBBS portal by August 15, 2026.
Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-246S
Solicitation SPE7M1-26-T-246S is a procurement request by the Department of Defense Maritime Supply Chain for 2,000 feet of electrical wire, identified by NSN/Part Number 6145-01-384-4306. The requirement specifies that the wire must be delivered in 500-foot spools, each consisting of one continuous length. Delivery is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of June 3, 2027, which is 292 days after the date of order. Inspection and acceptance are both designated to occur at the destination and are the responsibility of the Government. The contract mandates strict adherence to several technical and quality standards, including the DLA Master List of Technical and Quality Requirements (RA001), ASTM D3951 for packaging, and MIL-STD-129 for marking and bar-coding. Special requirements include compliance with DFARS clauses regarding the prohibition of hexavalent chromium, the safeguarding of covered defense information (NIST SP 800-171), and the prohibition of certain foreign-made telecommunications equipment. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Proposals must be submitted via the DIBBS portal by August 15, 2026, and alternate offerors are required to provide a complete data package for any proposed parts.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334413
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-056L
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of two power transformers under part number 5950-01-306-0520. The contract requires delivery within 20 days after the order is placed. It is categorized under NAICS code 334413 and is managed by primary point of contact Ryan Snyder. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Additionally, any portable instruments containing mercury must be shock-proof and feature secondary containment.
Semiconductor and Related Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M1-26-U-4861
Solicitation SPE7M1-26-U-4861 is an Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of cartridge fuses, identified by NSN 5920-01-576-1785. This is a total small business set-aside under NAICS code 335313, with an estimated annual quantity of 15 units and a guaranteed minimum of 2 units. The contract has a maximum value ceiling of 350,000 dollars. Delivery is required on an FOB Origin basis to multiple destinations within 78 days after receipt of order. The items are classified as commercial off-the-shelf, and alternate offerors must provide a complete data package. Compliance with DLA packaging requirements RP001 and marking standard MIL-STD-129 is mandatory. Because the items may be hazardous, contractors must adhere to FED-STD-313 and OSHA hazard communication standards, including the provision of Safety Data Sheets. Inspection and acceptance will occur at the destination and are performed by the government. All invoicing must be processed electronically through the Wide Area WorkFlow system. Proposals are due by August 14, 2026, via the DIBBS portal.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER SLEEVE
Solicitation # SPE7M1-26-T-240F
The solicitation for a cylinder sleeve under contract number SPE7M1-26-T-240F requires delivery of one unit to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591 with a 20-day delivery window from contract award, targeting an original delivery date of July 16, 2026. The item is priced at $1.00 per unit with zero variance allowed in quantity, and delivery is FOB destination where the Government assumes risk and performs both inspection and acceptance. Packaging must strictly comply with MIL-STD-2073-1E using preservation method 31 for cooling/drying, with intermediate container E5 and packaging code U; markings must adhere to MIL-STD-129 with no special marking required, and palletization must meet DLA’s RP001 packaging requirements. Transportation must follow DLAD PROC NOTES C19 and C20, using the fastest traceable means, prohibiting parcel post, and the shipment must be tracked via RDD 777 with the TCN V2715761744062. The cylinder sleeve is subject to mandatory prohibitions against ozone-depleting chemicals and intentional introduction of mercury or mercury compounds, with exceptions only for functional uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or NAVSEA-approved reagents; portable mercury-containing devices must include shock-proof design and a secondary containment boundary as per NAVSEA 5100-003D. All hazardous materials must be documented with Safety Data Sheets and labeled according to the Hazard Communication Standard. Offerors must affirm their small business status, socioeconomic classification, and Unique Entity Identifier, and disclose any provision of covered defense telecommunications equipment. Compliance with FAR and DFARS clauses including employment verification, trafficking in persons, sustainable products, cybersecurity safeguards, and accelerated payments to small business subcontractors is required. The contract is subject to DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, and invoicing must be processed through WAWF. The award basis, contract type, and full contracting officer details remain unlisted as of this solicitation.
Air and Gas Compressor Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER SLEEVE AND
Solicitation # SPE7M1-26-T-241L
The contract pertains to the procurement of five cylinder sleeve and piston assemblies, identified by NSN 4310014779173 and part number A1-D2602, under solicitation SPE7M1-26-T-241L. Delivery is required within 146 days from the award date, with all units to be shipped FOB origin and inspected at destination. The quantity is fixed with no variance allowed, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containment codes, while marking follows MIL-STD-129 with no special coding required. Palletization adheres to DLA packaging requirements, and the cargo must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. All items are designated as critical application items and must be free of intentional mercury or mercury-containing compounds except under strictly defined exceptions for functional uses such as batteries, sensors, or instrument components, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, with compliance enforced based on the revision in effect at the time of solicitation or award. The unit price is $5.00 per unit, totaling $25.00, and the point of contact for inquiries is Michael Reese at the Department of Defense’s Maritime Supply Chain.
Air and Gas Compressor Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details