Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPACITOR, FIXED, ELECTR

Active
SPE7M2-26-T-5987Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.

General Info

Procure QPL-approved electrolytic capacitor per MIL-PRF-39003, no mercury, compliant packaging, FOB origin, deliver by May 9, 2027.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5987.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPACITOR,FIXED,ELECTROLYTIC
CAPACITOR, FIXED, ELECTROLYTIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
.
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
SPE7M2-26-T-5987
SECTION B
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-39003/1L REVISION NR L DTD 07/13/2021 PART PIECE NUMBER: M39003/01-7300
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-39003P SUPP 1 REVISION NR P DTD 01/13/2023 PART PIECE NUMBER: M39003/01-7300
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017684877 0001 EA 41.000
NSN/MATERIAL:5910013072343
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
SPE7M2-26-T-5987
SECTION B
PR: 7017684877 PRLI: 0001 CONT’D
UNIT CONT:A1 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
REFER TO MIL-C-39003 AND APPLICABLE SLASH SHEETS FOR ADDITIONAL MARKING REQUIREMENTS. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
SPE7M2-26-T-5987
SECTION B
PR: 7017684877 PRLI: 0001 CONT’D
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:01/26/2027 Original Required Delivery Date:05/09/2027
SPE7M2-26-T-5987 NSN/Part Number: 5910-01-307-2343 Quantity: 41 EA Purchase Request: 7017684877QTY: 41 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M5-26-T-367C
This contract specifies the procurement of 25 fixed ceramic capacitors under NSN 5910-01-252-9694 and part number CDR21BG620EFTR, compliant with MIL-PRF-55681/5F Revision F dated 03/24/2025. The item must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R identifiers, with controlled revisions based on solicitation or award dates. Manufacturing sources are restricted; materials produced by American Technical Ceramics (ATC) with lot date codes between 9449 and 9822 are prohibited due to a GIDEP alert. The use of ozone-depleting substances in any phase of production is forbidden unless explicitly approved in writing by the Contracting Officer, and this restriction does not apply to commercial items as defined by FAR 11.001 or part-numbered-only items. Packaging must conform to MIL-STD-2073-1E, with unit packaging marked per MIL-STD-129 and additional lead finish labeling per IPC/JEDEC J-STD-609, requiring clear identification of lead content on each unit pack. All items must be delivered within 20 days to the designated destination in San Diego, California, FOB origin with zero variance permitted. Shipping must use traceable freight methods only—parcel post is prohibited—and special markings with code ZZ apply. The delivery schedule is tied to an original required delivery date of July 30, 2026, with inspection and acceptance occurring at the destination. The contract is issued under solicitation SPE7M5-26-T-367C, with specific federal and DoD oversight identifiers, and point of contact details provided for procurement inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M0-26-T-028D
The contract is for the procurement of three thermal resistors, identified by NSN 5905-01-453-6917, under solicitation SPE7M0-26-T-028D, with a required delivery within five days of award. The technical and quality requirements governing this acquisition are defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined based on whether the acquisition is simplified or large, with control tied to the solicitation issue date, award date, or any amendment date. Mandatory compliance includes the prohibition of intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except in specifically exempted cases such as functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or authorized chemical reagents by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary, in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all items must be physically marked as required. The offeror must submit a complete data package including specifications and performance data for both the approved and alternate parts, as no existing data is available. The contracting activity is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with primary point of contact Laurie Wassmuth, and the response deadline is August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M0-26-T-030V
The contract is for a single fixed wire resistor with part number 7S16A1640.1KILOHMSPORM0.05PCT and NSN 5905009017382, supplied by PRIME TECHNOLOGY LLC or SHALLCROSS INC DBA, meeting strict technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The item must be delivered within five days FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with additional lead finish identification required per IPC/JEDEC J-STD-609 on each unit pack. The delivery address is Fort Carson, Colorado, with shipments required to use the fastest traceable means—parcel post is prohibited—and all packaging must follow DLA packaging requirements. The item is designated for government use only, with a required delivery date of July 30, 2026, and procurement is managed under solicitation SPE7M0-26-T-030V by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-249R
The contract is for the procurement of three power transformers, identified by NSN 5950-01-736-4905 and part number 4072097-01, under solicitation SPE7M1-26-T-249R, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 239 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each, at a price of $3.00 per unit, totaling $9.00 for the three units, with no variance permitted in quantity. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA packaging requirements. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the same address used for freight shipping. The required ship date is April 14, 2027, matching the original delivery deadline. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. All transportation logistics are subject to DLAD procedural notes C19 and C20. The solicitation opened on August 4, 2026, with responses due by August 17, 2026, and is classified under NAICS code 334416 for transformer manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M1-26-Q-1329
The contract involves the procurement of 19 variable non-wire wound nonprecision resistors with NSN 5905-01-221-0620 under solicitation SPE7M1-26-Q-1329, which is a total small business set-aside classified under NAICS code 334416. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure—domestic or international—to foreign persons, including foreign nationals employed by U.S. entities, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Delivery is required within 175 days after order award, and the point of contact for the contract is Joseph Madjecki of the Maritime Supply Chain under the Department of Defense, with performance set at New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M5-26-T-366S
The contract specifies the procurement of one variable resistor, part number 5905-01-037-3387, under solicitation SPE7M5-26-T-366S, with a required delivery within 20 days of award and delivery terms FOB origin. The item must comply with DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit packaging configured for 100 units per intermediate container marked with package code U. All items must be marked in accordance with MIL-STD-129, and additional lead finish identification per IPC/JEDEC J-STD-609 is required on each unit pack. Mercury and mercury-containing compounds are strictly prohibited except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and naval chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment as defined by NAVSEA 5100-003D. The delivery destination is the USS Dwight D. Eisenhower, with shipments required to use traceable transportation methods and explicitly exclude parcel post. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List, and the revision in effect on the solicitation issue date governs compliance. The contract includes inspection and acceptance at destination, with zero variance allowed in quantity. The point of contact for inquiries is Jeanette Heisey, and the item is classified under NAICS code 334416 for active devices.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-028F
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910012529695 and part number CDR21BP102AGTR, governed by MIL-PRF-55681/5F Revision F dated March 24, 2025. The item must comply with all applicable technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-39028. The contractor is required to apply specific lead finish markings in accordance with IPC/JEDEC J-STD-609 on each unit pack, ensuring compliance with environmental and material attribute identification standards. The use of ozone-depleting substances is strictly prohibited in manufacturing or processing unless written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the product except under narrowly defined exceptions for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. The contract mandates delivery within five days of award, FOB origin, with no tolerance for quantity variance, and requires inspection and acceptance at the destination. Packaging must meet MIL-STD-129 marking standards, with special restrictions on shipping methods—parcel post is prohibited, and shipments must use fast, traceable freight services addressed to the Naval Supply Systems Command in Norfolk, Virginia. All items must be delivered by August 5, 2026, under solicitation SPE7M0-26-T-028F, with full and open competition applicable. The contract emphasizes strict adherence to environmental compliance, material restrictions, and precise packaging and labeling protocols, with direct oversight from the Department of Defense and the Maritime Supply Chain ESO Contracting Office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
COIL RF
Solicitation # SPE4A5-26-T-328V
The contract pertains to the procurement of seven units of RF coil, identified by NSN 5950-01-212-6288, under solicitation SPE4A5-26-T-328V, with a response deadline of August 12, 2026, and a delivery requirement 184 days after award. Technical and quality standards referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA specifications, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item is not required to have Item Unique Identification per the Service customer’s request, though other marking requirements under RQ017 must be followed, including physical identification and bare item marking. Government identification must be removed from any non-accepted supplies. Measuring and test equipment used in production must meet specified standards. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completed DOD training on export-controlled data handling, and formal authorization from DLA. The place of performance is Robins Air Force Base, Georgia, with primary point of contact, Renee Wassum, reachable via email and phone for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-225J
The contract solicitation SPE7M1-26-T-225J seeks 13 electrical coils identified by NSN 5950-01-227-4552 for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with a 168-day ADO delivery timeline culminating in a need ship date of January 19, 2027. Performance is governed by strict compliance with MIL-STD-2073-1E for packaging and preservation, requiring cleaning and drying without additional preservation or wrap materials, and MIL-STD-129 for labeling and barcoding, with all shipments marked for ocean transport via U.S.-flag vessels unless a waiver is secured through formal written request submitted at least 45 days prior to sailing. The contract mandates adherence to DFARS clauses including hazardous material identification under 252.223-7001, requiring submission of Safety Data Sheets and compliant hazard labels prior to award, and 252.247-7025 which enforces U.S.-flag vessel use for maritime transport and necessitates post-shipment documentation including ocean bills of lading and invoice compliance certifications. The contract is issued under FOB Origin terms with payment handled exclusively through WAWF using invoice types such as Invoice and Receiving Report or Invoice 2in1, and no pricing details are provided in the solicitation leaving the contract value undefined. The offeror must be registered in SAM.gov with a valid UEI and CAGE code and must represent their size status—small business or other than small—as well as any applicable socioeconomic certifications including WOSB, SDvOSB, HUBZone, or SDB status. The solicitation incorporates multiple FAR and DFARS clauses including equal opportunity requirements, combating trafficking in persons, employment eligibility verification, sustainable procurement, and whistleblower protections, with alternate language applied in several instances such as Alternate I to FAR 52.222-36 and Alternate II to FAR 52.227-1. Specialized clauses require disclosure of covered defense telecommunications equipment and supplier information, and contractor compliance with NIST SP 800-171 cybersecurity requirements for handling controlled unclassified information. Inspection and acceptance occur at the destination facility with the contractor bearing full responsibility for compliance with all technical, packaging, and documentation standards. Proposals must be submitted electronically via DIBBS by August 6, 20
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-366L
The contract is for the procurement of 106 shielding gaskets, electronic, identified by NSN 5999-01-341-6563, with a total estimated value of $7,796.00, split between two CLINs for 20 and 86 units respectively. Delivery is required by November 30, 2026, with a firm delivery location in Jacksonville, FL, and FOB Origin terms apply, requiring offerors to include all transportation costs to a contiguous U.S. destination. The solicitation, issued on August 3, 2026, with a response deadline of August 14, 2026, is managed by the Department of Defense’s Active Devices Division through the DIBBS electronic portal. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to contractors with approved JCP certification, completed DOD export training, and DLA authorization. All packaging and marking must comply with MIL-STD-129, RP001, and either ASTM D3951 for non-hazardous materials or FED-STD-313 with TQ IP025 for hazardous items, and barcoding must include NSN, contract number, and lot information. The contractor must adhere to NIST SP 800-171 cybersecurity requirements and DFARS 252.204-7012 for safeguarding covered defense information, and is subject to CMMC Level 2 certification for third-party assessment. The contract mandates use of WAWF for invoicing, requires submission of Safety Data Sheets, and applies FAR and DFARS clauses covering combating human trafficking, employment eligibility, sustainable products, hazard communication, cyber incident reporting, prohibited procurement from Chinese military companies, and whistleblower rights. Inspection and acceptance occur at the destination, and the government retains full authority over acceptance criteria. Offerors must provide UEI and CAGE codes, state their small business status, and affirm compliance with all applicable representations. No evaluation factors or award criteria are specified, and the basis of award will be determined by the contracting officer. All technical and quality requirements are derived from the DLA Master List, which takes precedence over commercial standards, and no formal attachments are listed, with reference materials incorporated by link only.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
This contract specifies the procurement of a copper alloy socket type tee fitting with a nominal pipe size of 1 inch, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and delivery is required within 100 days of award. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates strict adherence to DLA packaging standards, configuration change management through engineering change proposals, and the removal of government identification from non-accepted supplies. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The supplier is required to furnish one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the point of inspection if applicable. An electronic copy of each COQC must be uploaded as an attachment to the Receiving Report in the iRAPT system for Government records. The COQC documentation is considered part of the item’s price, and compliance is mandatory for acceptance. The solicitation is a total small business set-aside under FAR 19.5 with a response deadline of August 11, 2026, and the point of contact for inquiries is Alla Yakover. The place of performance is New Cumberland, PA, and the contracting activity falls under the Department of Defense’s Nuclear Reactor Program.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0714
The contract pertains to the procurement of 167 fixed bushings, identified as nuts and sleeves, with the NSN 5310-00-916-7522, designed for use in military applications under the Nuclear Reactor Program of the Department of Defense. The component features a #6 .138 inch - 32 UNC-2B threaded nut size and is constructed from aluminum alloy 2024 with an overall cadmium surface treatment, except for the internal locking insert which is made of polytetrafluoroethylene, providing a self-locking mechanism to prevent loosening under vibration. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, whether military or consensus non-government standard, with previous revisions still acceptable for hardware manufactured before the solicitation date. All units must bear identification markings consistent with MIL-STD-130N and adhere to the DLA Master List of Technical and Quality Requirements referenced in the procurement documents, including quality conformance inspection and removal of government identification from non-accepted supplies. The solicitation, under number SPE7M2-26-Q-0714, is a total small business set-aside with a response deadline of August 11, 2026, and a 100-day delivery window after award. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in limited, approved cases such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment layer as per NAVSEA 5100-003D. Packaging must meet DLA requirements and all supplies are subject to federal procurement rules for military hardware. The point of contact for the procurement is Alla Yakover, and performance is required at Hill AFB, Utah, with all submissions governed by the DLA’s eProcurement system and procurement guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-5985
This contract specifies the procurement of lock washers identified by NSN 5310-01-339-6531 under solicitation SPE7M2-26-T-5985, requiring full and open competition with no deviations or waivers permitted unless formally approved. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in explicitly allowed applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The product is designated as a critical application item requiring strict configuration control and engineering change proposal procedures. The contract includes two delivery lines for a total quantity of 128 hardware units, with each line specifying a quantity of 11 and 117 units respectively, to be delivered in HD (hand) units under FOB origin terms, with zero tolerance for variance in quantity. Delivery must occur within 105 days from contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and ASTM D3951 standards with preservation method code 10, and marking must follow MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. Shipments are directed to two DLA distribution depots: Hill AFB, Utah, and Robins AFB, Georgia, with defined freight and parcel post addresses provided. The need ship dates are December 1, 2026 and December 26, 2027, while the original required delivery date is March 27, 2027. The contract is managed by the Department of Defense’s Nuclear Reactor Program, with primary points of contact listed for inquiries. All items must satisfy the DoD-authorized unit of issue and related ANSI X12 standards as referenced by DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELEC
Solicitation # SPE7M2-26-T-5983
The contract specifies the procurement of one plug-in electrical socket with NSN 5935-01-604-0735 and part number RSN116890 from AMPHENOL PCD INC, under solicitation SPE7M2-26-T-5983. Delivery is required within 20 days FOB destination with no quantity variance allowed, and acceptance occurs at the delivery point. Packing must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. Packaging and palletization adhere to DLA’s RP001 requirements, and all handling of hazardous materials must conform to IP025 standards. The item is to be delivered to USS HIGGINS DDG 76 at FPO AP 96667, with transportation governed by DLAD PROC NOTES C19 and C20. The original required delivery date is July 31, 2026, and the contract is tied to project EK5 TP 2 with vendor tracking code YNCA01 SIG A. Technical and quality requirements are governed by the DLA Master List referenced in RA001, and the solicitation falls under NAICS code 334419 managed by the Department of Defense’s Nuclear Reactor Program.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5986
This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M2-26-Q-0719
The contract awards O-rings under NSN 5331-00-167-5126 with a total quantity of 2,210 units distributed across three delivery points: Norfolk Virginia, San Diego California, and Warner Robins Georgia, with delivery required within 150 days of award. The items must comply with SAE AS3209C and AMS7276J specifications and are classified as critical application items subject to strict quality control. Manufacturing and assembly must be performed only by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List, accessible via eAuditNet. The contract prohibits the use of mercury or mercury-containing compounds in any part of the product, packaging, or preservation, with narrow exceptions for functional components like batteries and sensors specifically authorized by NAVSEA, and mandates shock-proof designs with secondary containment for permissible mercury-containing items. Zero-tolerance sampling applies under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 standards, including strict compliance with MIL-STD-129 marking rules and a ban on class I ozone-depleting chemicals in all materials and processes. Pricing is firm fixed price with no tolerance for quantity variances, inspection and acceptance occur at destination, and FOB terms are origin. All deliveries must use designated military shipping addresses and follow DLA transport protocols.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-5984
The contract specifies the procurement of 23,869 self-locking hexagon nuts under NSN 5310-01-358-7622, with delivery due in 161 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The nuts must comply with technical standards NASM17829 Rev 2, NASM25027 Rev 1, and MIL-DTL-32258, and are classified as a critical application item requiring strict adherence to configuration control and engineering change procedures. All supplies must be free of mercury and mercury-containing compounds except for specific exempted uses such as batteries or sensors approved by NAVSEA, and portable devices containing mercury must include a secondary containment. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require pre-approval. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified as Type 10, Class 50, and no special marking required. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Full and open competition applies, and the contract enforces DLA packaging and procurement requirements, including prohibition of mercury in preservation and packaging materials. The delivery window, quantity, and unit price are fixed with no variance allowed, and the point of contact for inquiries is David Larsen of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7M2-26-Q-0716
This contract specifies the procurement of 65 self-locking hexagon nuts identified by NSN 5310-00-255-0010 and part number MS17830-24C, manufactured in compliance with the non-government standard NASM17830 Revision 3 dated July 31, 2023, and governed by QAP-13873 Revision D. The item is classified as a commercial item and a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. All hardware must conform to the current revision of the applicable standard, with prior revisions accepted only for previously manufactured items; no exceptions apply to future production. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise contracted. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking, except for specific exempted applications such as certain batteries, lights, instruments, or weapon systems as defined by NAVSEA, which must include secondary containment and shock-proof design. The nuts are subject to firm fixed pricing with no variance allowed in quantity, and delivery must occur within 100 days after order award. Pricing brackets are defined for quantities from 100 to 250 and 251 to 500 units, with delivery expected within 100 days for each tier. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including preservation method 33, dry clamping, and non-corrosive materials, with marking per MIL-STD-129 and no special codes. Palletization must follow DLA guidelines, and all packaging must exclude mercury or mercury compounds entirely. Items are to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The solicitation is a total small business set-aside, with a bid deadline of August 11, 2026, and the contract is managed by the Department of Defense’s Nuclear Reactor Program.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing and Quality InspectionThe contract requires the performance of Product Verification Testing and quality sampling for electrical insulation sleeving in strict accordance with MIL-STD-1916 to achieve zero non-conformances. This effort is critical to ensuring the highest level of product integrity and compliance with military quality standards, with all testing and sampling activities designed to validate conformance before acceptance. The work must be executed with precision to meet the zero-defect expectation, and the successful performer will be responsible for documenting and reporting all test results to demonstrate full adherence to the required specifications. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Nuclear Reactor Program under the Department of Defense. The performance location is Tinker Air Force Base with a postal code of 73145-8000. The response deadline is August 12, 2026, and the solicitation was posted on August 3, 2026. All interested parties must submit their proposals by the deadline, and failure to comply with the testing protocol or deliver results meeting the zero non-conformance standard will result in rejection. The contract is not subject to a specific set-aside designation and is open to qualified subcontractors capable of executing high-precision quality assurance under strict military standards.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and palletization services for insulation sleeving in strict compliance with military standards MIL-STD-2073-1E, MIL-STD-129, and DLA RP001, ensuring full adherence to Department of Defense requirements for durability, identification, and handling in logistical environments. All work must be performed to meet exacting specifications for mark clarity, material compatibility, and unit configuration to support safe transport and inventory management across military supply chains. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating the physical site where the services will be delivered and verified. This is a subcontract under NAICS code 561910, related to other support activities for transportation, and is issued by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 12, 2026, leaving a limited window for qualified vendors to submit proposals. The contract does not specify any set-aside status and is open to eligible subcontractors capable of meeting the stringent packaging and labeling benchmarks required for defense logistics. All submissions must be directed through the official DIBBS platform using the provided solicitation reference.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Electrical Insulation Sleeving Manufacturing and SupplyThe contract entails the manufacture and supply of 15,111 feet of electrical insulation sleeving identified by NSN 5970-00-954-1624, which must fully comply with the SAE AS23053C Rev. C specification for use in critical military applications. This procurement is part of a subcontract awarded under the Nuclear Reactor Program within the Department of Defense, and the materials are required to meet rigorous performance and quality standards appropriate for high-stakes defense systems. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating where the delivered goods are to be utilized or inspected. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 12, 2026, indicating a narrow window for qualified suppliers to submit proposals. The NAICS code 335931 classifies the activity under Other Electrical Equipment and Component Manufacturing, aligning the contract with specialized electrical component production rather than general wire and cable manufacturing. The contract is structured as a subcontract, suggesting integration into a larger supply chain managed by a prime contractor under the Department of Defense’s logistics framework. All deliverables must meet exacting military specifications to ensure reliability in sensitive nuclearreactor-related infrastructure.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details