Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPACITOR, FIXED, PLA

Active
SPE7M5-26-T-444EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one fixed PLA capacitor, part number CQR39A3KF332K3R, under solicitation SPE7M5-26-T-444E. The item must be manufactured by a qualified source in accordance with MIL-PRF-19978, and commercial substitutes are not permitted without prior written government approval. The delivery is required within 10 days after receipt of order, with the shipment destined for Fort Bragg, North Carolina. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include compliance with IPC/JEDEC J-STD-609 for lead finish marking and preservation according to MIL-DTL-39028. Inspection and acceptance will take place at the destination, and the item must meet all Qualified Products List or Qualified Manufacturers List requirements.

General Info

Procurement of one PLA capacitor CQR39A3KF332K3R for delivery to Fort Bragg, North Carolina.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

BLDG A 3434 KEERANS STREET, FORT BRAGG, NC, 28310-0000, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-444E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPACITOR,FIXED,PLA
CAPACITOR,FIXED,PLA
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
THE REQUIRED ITEM IS CQR39A3KF332K3R MANUFACTURED
BY A QUALIFIED QPD SOURCE IAW MIL-PRF-19978.
COMMERCIAL SUBSTITUTES ARE NOT ACCEPTABLE WITHOUT
PRIOR WRITTEN APPROVAL BY THE GOVERNMENT.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-19978/16C REVISION NR C DTD 12/09/2021 PART PIECE NUMBER: CQR39A3KF332K3R
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-19978M REVISION NR M DTD 06/16/2023 PART PIECE NUMBER: CQR39A3KF332K3R
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-444E
SECTION B
PR: 7018038164 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018038164 0001 EA 1.000
NSN/MATERIAL:5910014505980
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-39028, FOR CAPACITORS. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
SPE7M5-26-T-444E
SECTION B
PR: 7018038164 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W36LKJ
0082 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A 3434 KEERANS STREET
FORT BRAGG NC 28310-0000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W36LKJ
0082 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A 3434 KEERANS STREET
FORT BRAGG NC 28310-0000
US
MARKFOR
W36LKJ
0082 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A 3434 KEERANS STREET
FORT BRAGG NC 28310-0000
US
M/F: (TCN) W36LKJ62300141
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
SPE7M5-26-T-444E NSN/Part Number: 5910-01-450-5980 Quantity: 1 EA Purchase Request: 7018038164QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTANCE GROUNDIN
Solicitation # SPE7M2-26-T-6218
This contract, identified as SPE7M2-26-T-6218, is a federal procurement for five units of resistance grounding hardware under NSN 5905016100079. The requirement is a total small business set-aside for the Department of Defense Nuclear Reactor Program, with a required delivery date of July 18, 2027, and a delivery window of 161 days. Shipping is designated as FOB Origin and is to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. It explicitly prohibits the intentional addition of mercury and the use of Class I ozone-depleting substances unless written approval is granted by the contracting officer. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
REACTOR
Solicitation # SPE7M1-26-T-273D
This contract, identified as SPE7M1-26-T-273D, is a solicitation for the procurement of six units of a reactor with NSN 5950-01-516-5374. The order is associated with purchase request 7017841410 and requires delivery within 20 days. The items are identified by part number 11480542 and are linked to Magnetika East Limited Partnership and Raytheon Company. The contract specifies strict packaging and marking requirements in accordance with MIL-STD-2073-1E and MIL-STD-129, noting that the transformer terminals are fragile and subject to breaking. Shipping is FOB Origin, with the final destination being the Royal Saudi Air Defense Forces in Jeddah, Saudi Arabia, via New York Forwarding Service Inc. The original required delivery date is set for August 14, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
RESISTOR ASSEMBLY, F
Solicitation # SPE7M0-26-T-060U
This contract is for the procurement of Fast Idle Resistor Assemblies, identified by NSN 5905998333139 and KNDS Defence UK Limited part number G406/8627/18. The requirement consists of two separate line items totaling three units, with delivery required within five days. The items are to be delivered FOB Origin to the DLA LMP Zone 1 facility in Texarkana, Texas, with an original required delivery date of August 27, 2026. Compliance with strict technical and quality standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. A critical requirement is the application of lead finish markings on each individual unit pack in accordance with IPC/JEDEC J-STD-609. The contract specifies that shipping must be conducted via the fastest traceable means and explicitly prohibits the use of parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR
Solicitation # SPE7M5-26-T-411X
Solicitation SPE7M5-26-T-411X, issued by the Department of Defense Active Devices Division, is a request for the procurement of 22 resistors under NSN 5905-01-095-8269. The contract requires delivery to the receiving warehouse in Tracy, California, with a delivery schedule of 76 days after direction or order. The procurement is managed via the DLA Internet Bid Board System, with the primary point of contact being Jeanette Heisey. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment and storage marking. Specific requirements include dry preservation method 41 and compliance with IPC/JEDEC J-STD-609 for component marking. Because the items may involve hazardous or radioactive materials, the contractor must provide Safety Data Sheets and hazard labels prior to award and comply with 29 CFR 1910.1200. Inspection and acceptance will occur at the destination, conducted by the Government. Payment and invoicing must be processed electronically through the Wide Area Workflow system.
ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M2-26-T-6223
This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6223, is for the procurement of 11 thermal resistors identified by NSN 5905-01-598-0869. The contract requires delivery within 120 days after receipt of the order, with performance located in New Cumberland, Pennsylvania. The agreement incorporates specific DLA technical and quality requirements, including RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RQ017 for physical item marking. Because no data is currently available, any alternate offeror must provide a complete data package for both the approved and alternate parts. Responses are due by August 24, 2026.
NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PLASTI
Solicitation # SPE7M1-26-U-5090
The contract solicitation seeks a fixed capacitor with NSN 5910012624133, with an initial quantity of 29 units specified under Line 0001, to be delivered within 157 days of award. The procurement is structured as a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate order value reaches $350,000, whichever comes first, with an estimated two orders per year and a guaranteed minimum of four units. Shipments will be directed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. This is a source-controlled item, and only approved manufacturers identified by codes 13058 47511W and 13619 RC1075 are eligible to supply. All items must strictly conform to the drawing specifications referenced in the solicitation, with digitized technical documents accessible electronically. The solicitation is a Request for Quotation issued under a Small Business Set Aside, classified under NAICS code 334416, and is exclusively available online through the provided SAM.gov link; hard copies are not distributed. Quotes must be submitted electronically by the deadline of August 21, 2026, and all responsible sources are invited to respond. The issuing office is the DLA Land and Maritime based in Columbus, Ohio, with inquiries directed to the designated buyer email.
MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
Solicitation # SPE7M5-26-T-412C
Solicitation SPE7M5-26-T-412C is a fixed-price request for quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of seven non-precision wire-wound variable resistors, identified by NSN 5905-01-468-1208. This acquisition is a total small business set-aside under NAICS code 334416. The required delivery date is July 19, 2027, with the items to be shipped FOB Origin and delivered to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and IPC/JEDEC J-STD-609 for identifying lead or lead-free component finishes. Compliance with the Buy American Act, the Berry Amendment, and DFARS regulations regarding the prohibition of certain telecommunications equipment and the safeguarding of covered defense information is required. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PAPER
Solicitation # SPE7M5-26-T-444G
This solicitation, issued by the Department of Defense Active Devices Division under number SPE7M5-26-T-444G, is for the procurement of one fixed paper dielectric capacitor, identified by NSN 5910-01-242-1658. The contract requires delivery within 20 days after the order is placed and specifies that the item must adhere to DLA packaging requirements and specific technical and quality standards. Compliance with quality requirements RP001, RA001, RQ011, and RQ017 is mandatory, including guidelines for bare item marking and the removal of government identification from non-accepted supplies. Because no existing data is available, the alternate offeror must provide a complete data package for both the approved and alternate parts. The response deadline for this federal acquisition is September 8, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M0-26-T-035P
This procurement is for a single unit of a Transformer, Power and Transformer, Radio Frequency with National Stock Number 5950-00-671-6701, sourced from Honeywell Intl Inc Defense under part number 1289103-1, designated as a Critical Application Item. The contract is issued under solicitation SPE7M0-26-T-035P by the Department of Defense through the DLA Land and Maritime Maritime Supply Chain ESOC Buys office, with a required delivery date of August 7, 2026, and a delivery window of five days ADO under FOB Origin terms. Inspection and acceptance both occur at the destination location, Tinker AFB, OK, with the contractor required to comply with DLA’s Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for labeling, with hazardous materials following FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Palletization must conform to RP001, and all shipments must use traceable freight methods; parcel post is expressly prohibited. The contractor must also comply with stringent cybersecurity mandates, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding Covered Defense Information, along with related clauses on cyber incident reporting, third-party data disclosure, and prohibition of certain telecommunications equipment under DFARS 252.204-7018. The Buy American Act and DFARS 252.225-7001 apply due to the contract value exceeding the micro-purchase threshold, with additional constraints prohibiting hexavalent chromium and hazardous material disposal. The contract incorporates mandatory clauses on whistleblower rights, disclosure controls, electronic payment processing via WAWF, and limitations on arbitration agreements. All offers must be submitted through DIBBS by August 21, 2026, and the solicitation is structured as a small business set-aside with specific representations required from respondents regarding their compliance with federal regulations, entity identification, and supply chain security prohibitions, particularly those targeting Communist Chinese military companies. The item is certified under DPAS for national defense priority rating, and all administrative and payment data must align with government-established DoDAAC codes upon
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M5-26-Q-0939
The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7M5-26-Q-0939 for the procurement of two fixed wire wound resistors. The items are identified by NSN/Part Number 5905-01-356-4098 and are associated with purchase request 7017219290. This federal solicitation was posted on August 26, 2026, with a very short response window closing on August 27, 2026. Interested parties can find further details and submission guidelines through the DLA's official procurement portal.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 334416
New
DIBBS
CAPACITOR
Solicitation # SPE7M0-26-T-061G
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of 124 capacitors under NSN 5910-01-185-0189. The contract requires a delivery timeframe of 5 days after receipt of order and is categorized under NAICS code 334416. The agreement mandates strict adherence to DLA packaging and technical requirements, specifically referencing RP001, RA001, RQ011, and RQ017 regarding item marking and the removal of government identification from non-accepted supplies. Alternate offerors must provide a complete data package for both approved and alternate parts to be considered.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
REPAIR KIT, MOTOR GE
Solicitation # SPEA45-26-T-359G
Solicitation SPE4A5-26-T-359G is a request for quotations issued by DLA Aviation, ASC Supplier Oper OEM Division, for the procurement of eight GE Motor Repair Kits, identified by NSN 6125006571721 and GE Aviation Systems LLC part number K24420. This is an automated simplified acquisition under the First Destination Transportation program, with delivery set for 171 days after order. The items are to be delivered FOB Origin to the DLA Distribution Depot Hill in Utah, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including DLA Master List standards RA001, RP001 for packaging, and RQ017 for bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling must follow MIL-STD-1916 or ASQ H1331. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334413
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-444M
This contract is for the procurement of 52 electrical plug connectors under solicitation number SPE7M5-26-T-444M. The items are identified by NSN 5935007307325, with corresponding part numbers from Spectron Inc (8724262) and Amphenol Corp (60-042728-22S). This is designated as a critical application item, and the delivery is required within 160 days, with a need ship date of February 16, 2027. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-2073-1E and MIL-STD-129. A significant restriction is placed on the use of Class I ozone-depleting substances during manufacturing and testing unless written approval is granted. Delivery is FOB Origin, with the final destination and inspection point located at DLA Distribution San Joaquin in Tracy, California.
Semiconductor and Related Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
AMMETER
Solicitation # SPE7M5-26-T-444A
This contract is for the procurement of one ammeter, identified by NSN 6625-01-120-8914 and associated with Ward Leonard CT LLC part numbers 104.421-24 and 23488. The item is designated as a critical application item and may contain batteries. Delivery is required within 20 days, with a required delivery date of August 24, 2026, shipping FOB Origin to the NAVIMFAC PACNORWEST facility in Silverdale, Washington. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes specific environmental and security requirements, such as the prohibition of intentionally added mercury and the requirement for a CMMC Level 2 self-assessment for cybersecurity. Shipping must be handled via the fastest traceable means, explicitly prohibiting the use of parcel post.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
DIBBS
TRANSISTOR
Solicitation # SPE7M5-26-T-389B
This contract is for the procurement of 158 transistors, identified by NSN 5961-01-276-2452 and part number Q50-0012-001, provided by L3Harris Technologies, Inc. The agreement specifies a delivery timeframe of 168 days after order, with a required delivery date of December 28, 2026, and a need ship date of February 2, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and compliance with qualified supplier lists for semiconductors and electronic microcircuits. Key quality standards include MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Additionally, the contractor must follow IPC/JEDEC J-STD-609 for lead finish marking and MIL-DTL-19491 for preservation and packaging. A specific prohibition is placed on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions.
Semiconductor and Related Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335313
New
DIBBS
FUSEHOLDER, BLOCK
Solicitation # SPE7M5-26-T-401N
This contract is for the procurement of one commercial off-the-shelf fuse holder block, identified by NSN 5920-01-522-0649 and Cooper Bussmann part number R25100-1CR. The order is managed by the Department of Defense Active Devices Division under solicitation SPE7M5-26-T-401N. Delivery is required within 20 days to the USS Rushmore LSD 47, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically referencing MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. The contract specifies a zero percent quantity variance and requires compliance with the DLA Master List of Technical and Quality Requirements.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-444L
This contract is for the procurement of one electrical plug connector, identified by NSN 5935015242477 and Glenair part number 711FS075NF2028P2-241. The item is designated as a critical application item and must be delivered within 10 days. The shipment is destined for the III Corps Tactical Area at Fort Hood, Texas, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Depending on the hazardous status of the material per FED-STD-313, packaging must follow either TQ requirement IP025 or ASTM D3951. All shipments must be sent via the fastest traceable means, excluding parcel post, to the specified freight shipping address at Fort Hood.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335314
New
DIBBS
FLASHER, THERMAL
Solicitation # SPE7M5-26-T-408L
Solicitation SPE7M5-26-T-408L is a Request for Quotations issued by the DLA Land and Maritime, Active Devices Division, for the procurement of 21 thermal flashers under NSN 5945-01-397-2110. The requirement is categorized under NAICS code 335314 and is intended for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania by January 19, 2027. The acquisition may be subject to an automated award process, provided there are no first article test requirements. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific component labeling must comply with IPC/JEDEC J-STD-609 to identify lead and lead-free attributes. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various federal regulations, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity assessments, and hazardous material labeling standards.
Relay and Industrial Control Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335932
New
DIBBS
HOUSING, ELECTRONIC CO
Solicitation # SPE7M5-26-T-444T
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-444T, is for the procurement of seven electronic component housings, identified by NSN 5999-01-514-7825. The contract requires delivery within 160 days after receipt of order, with the place of performance located in Tracy, California. The agreement mandates strict adherence to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the contract requires CMMC Level 2 certification and imposes rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
COUPLER, DIRECTIONAL
Solicitation # SPE7M5-26-T-386N
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-386N, is for the procurement of two directional couplers with national stock number 5985-01-109-3978. The delivery requirement is set for 168 days after the order is received. The place of performance is located in New Cumberland, Pennsylvania, and the contract falls under NAICS code 334220. Strict compliance with DLA packaging requirements and export control regulations is mandatory. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-T-405Y
This contract is for the procurement of 77 electrical connector backshells, identified by NSN 5935-01-144-1169 and part number M85049/25-43W. The items are classified as critical application items and must adhere to the Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements. Technical specifications are governed by SAE AS85049/25B and SAE AS85049F standards. The delivery is set for 112 days after order, with a required delivery date of October 2, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific functional cases approved by NAVSEA. Quality assurance will be managed through sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-403F
This contract is for the procurement of 39 electrical plug connectors, identified by NSN 5935-01-220-5512 and part number MS3456W22-13S. The items must adhere to SAE-AS50151E and SAE AS34561 standards and are designated as Qualified Products List items. A critical requirement is that the contractor must include a notice in each package informing the user that a backshell is required to complete the assembly, providing specific NSNs for both straight and right-angle styles. The agreement prohibits the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific functional cases approved by NAVSEA. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Delivery is set for 161 days after order, with shipping destined for DLA Distribution Warner Robins. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.
Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIOD
Solicitation # SPE7M5-26-T-444D
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-444D, is for the procurement of eight light emitting diodes identified by NSN 5980-01-542-7884. The contract requires delivery within 20 days after the order is received. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with specific mandates regarding the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. Because no current data is available, any alternate offeror must provide a comprehensive data package for both the approved and alternate parts. The response deadline for this federal acquisition is September 8, 2026.
Semiconductor and Related Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-411Z
Solicitation SPE7M5-26-T-411Z is a fixed-price request for quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of 50 electrical plug connectors, identified by NSN 5935017221627. The required delivery date is April 7, 2026, with a delivery lead time of 20 days. The items are to be delivered FOB destination to the US Army at Fort Bliss, Texas. Inspection and acceptance will also take place at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality standards, including MIL-DTL-55330 for connector preservation and packaging, MIL-STD-129 for marking, and RP001 for palletization. The use of mercury or mercury compounds in packaging and marking is strictly prohibited. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) and must comply with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses, including those regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details