Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CARABINER, PULLEY

Active
SPE1C1-26-T-1607Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two carabiner pulley units with National Stock Number 8465-01-613-1241, each priced at $1.00, for a total value of $2.00, to be delivered within 20 days to Camp Pendleton, California. All items must be individually bar-coded with a 13-digit NSN and an accompanying 12-digit government-assigned UPC, printed on standardized bleached sulfate paper tags with a 100-pound basis weight and smooth finish suitable for thermal transfer or direct printing. Tags must include a hole and fastener, be clearly legible to scanners, and remain fully visible when the item is folded and packaged without causing damage. Packaging and labeling must conform to MIL-STD-129, with palletization following DLA Packaging Requirements RP001; non-hazardous items must be commercially packaged per ASTM D3951, unless superseded by higher-priority DLA technical or quality requirements. Hazardous items must comply with TQ requirement IP025 per FED-STD-313. The use of parcel post is prohibited; shipments must be sent via traceable freight to the designated military facility. Inspection and acceptance occur at the destination point, with zero tolerance for quantity variance. The contract references canceled standards such as MIL-STD-105E and mandates compliance with current alternatives like MIL-STD-1916 or ANSI/ASQ Z1.4 for sampling. All packaging, labeling, and technical specifications are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over referenced commercial standards.

General Info

Two carabiner pulleys at $1 each, delivered to Camp Pendleton in 20 days with barcoded MIL-STD-129 compliant labeling.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

PR: 7017789529 PRLI: 0001 CONT’D, CAMP PENDLETON, CA, 92055-5697, US

Set-Aside

NONE

Documents

(1)

SPE1C1-26-T-1607.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → C AND T SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jennifer Scarpello
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARABINER,PULLEY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE
FOLLOWING:
LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG
FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE
STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A
SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS
SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,
CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL
BE A 13 DIGIT
NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT
CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC"
MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A
MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY
VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE
LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.
NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED
UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON
WHICH THE NSN APPEARS.
THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:
BAR CODE OMITTED OR NOT READABLE BY SCANNER
HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE
NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM
NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG USE TYPE VII
(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.
IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE
TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2
STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
SPE1C1-26-T-1607
SECTION B
Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
ZERO POINT INC 4PMU6 P/N A238 ADAPTOS, LLC 0SKY9 P/N ZPCARA101XX
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017789529 0001 EA 2.000
NSN/MATERIAL:8465016131241
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:1
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M28391
COMMANDING OFFICER
CLB-13
BOX 555707
SPE1C1-26-T-1607
SECTION B
PR: 7017789529 PRLI: 0001 CONT’D
CAMP PENDLETON CA 92055-5697
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M28391
DISTRIBUTION MANAGEMENT OFFICE
7TH ST AND A AVE BLDG 2262
M/F:M28391 CLB-13
CAMP PENDLETON CA 92055-5004
US
M/F: (TCN) M2839162170048
RDD:
PROJ: TP 3
SUPP ADD: YED SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017789550 0001 EA 1.000
NSN/MATERIAL:8465016131241
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:1
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE1C1-26-T-1607
SECTION B
PR: 7017789550 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:1
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M28391
COMMANDING OFFICER
CLB-13
BOX 555707
CAMP PENDLETON CA 92055-5697
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M28391
DISTRIBUTION MANAGEMENT OFFICE
7TH ST AND A AVE BLDG 2262
M/F:M28391 CLB-13
CAMP PENDLETON CA 92055-5004
US
M/F: (TCN) M2839162170099
RDD: 231
PROJ: TP 3
SUPP ADD: YEOD SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
SPE1C1-26-T-1607 NSN/Part Number: 8465-01-613-1241 Quantity: 2 EA Purchase Request: 7017789550QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
DIBBS
GLOVES, ANTI-VIBRATION
Solicitation # SPE8E6-26-T-4167
The contract is for the procurement of 100 pairs of anti-vibration gloves with NSN 4240-01-577-0574 and part number US40850, supplied by IMPACTO PROTECTIVE PRODUCTS INC and USA SEWING INC. Delivery is required within 35 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 standards. If the gloves are not classified as hazardous under FED-STD-313, they must be commercially packaged per ASTM D3951, but if hazardous, they must meet TQ requirement IP025. The unit of issue is each, with a total price of $100 per unit, and the delivery destination is the DLA Distribution facility in New Cumberland, PA. The solicitation was issued under SPE8E6-26-T-4167 with a response deadline of August 20, 2026, and the original required delivery date is September 7, 2026. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List in effect on the solicitation issue date.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 315990
New
SLED
Custom Embroidered Patch ManufacturingThe contract is for the full-cycle manufacturing of custom-designed fabric patches to meet Texas Department of Criminal Justice specifications, encompassing all stages from digitization support through embroidery, cutting, and final quality inspection. The work must adhere precisely to TDCJ standards, ensuring consistency, durability, and compliance with required designs and materials. The subcontract is classified under NAICS code 315990, which covers other textile product mills, indicating the specialized nature of the production and the expectation of industry expertise in textile manufacturing processes. The solicitation was posted on August 7, 2026, with a response deadline of August 21, 2026, at 9:00 PM Central Time. The contract is administered through Texas SmartBuy, and the place of performance and office address details are not specified in the provided data, though the agency responsible is the Texas Department of Criminal Justice. Interested vendors must submit proposals aligned with TDCJ’s technical and operational requirements, and the subcontract nature implies that this work may be integrated into a broader procurement or supply chain managed by another entity.
Texas Department of Criminal Justice

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
SLED
CUSTOM FABRIC PATCHES
Solicitation # IW262915
The Texas Department of Criminal Justice is soliciting custom fabric patches under solicitation number IW262915, with a response deadline of August 21, 2026, at 9:00 PM Central Time. The opportunity is open to state, local, and educational entities, with no specific set-aside designation applied, and the NAICS code is not specified. All patches must be manufactured to meet the agency’s specifications and delivered to locations within Texas, as the place of performance is limited to the state. The contract is managed by Andrea Jones, who serves as the primary point of contact and can be reached via email at andrea.jones@tdcj.texas.gov or by phone at 936-437-3859. Interested parties must submit their proposals through the Texas SmartBuy portal at the provided link before the deadline.
Texas Department of Criminal Justice

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
SLED
Custom Embroidered Fabric Patch ManufacturingThe contract solicits full-cycle manufacturing of custom embroidered fabric patches for the Texas Department of Criminal Justice, encompassing all stages from design digitization through final packaging, adhering strictly to government specifications. The work includes embroidery, cutting, application of backing and edging, thorough inspection, and secure packaging, ensuring each patch meets exacting quality and compliance standards. The solicitation is classified as a subcontract under NAICS code 315990 and is open for responses until August 21, 2026, with no set-aside restrictions specified. All performance must occur in alignment with the agency’s requirements, though the exact place of performance and point of contact details are not provided. Interested parties must submit proposals through the Texas SmartBuy portal prior to the deadline.
Texas Department of Criminal Justice

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
SLED
IW262915
Solicitation # IW262915
The Texas Department of Criminal Justice is soliciting custom fabric patches under solicitation number IW262916, with the request posted on August 7, 2026, and responses due by August 21, 2026, at 9:00 PM Central Time. The procurement is categorized as a State, Local, or Educational (SLED) government action, with no specific set-aside provisions identified. The patches are intended for use within the agency, and performance of the contract will take place in Texas, with no specific city designated. The sole point of contact for inquiries is Andrea Jones, who can be reached via email at andrea.jones@tdcj.texas.gov or by phone at 936-437-3859. The full solicitation details and submission instructions are available through the TX SmartBuy portal at the provided web link.
Texas Department of Criminal Justice

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
Federal
Leather Work Gloves SupplyThe contract calls for the supply of 25 medium-sized leather work gloves designed for industrial use, with a preference for gloves meeting ANSI/ISEA 105 cut resistance standards to ensure worker safety in demanding environments. This is a subcontract under a Small Business Set Aside, designated as total, meaning only small businesses are eligible to compete, and the procurement is tied to the NAICS code 315990 for other textile product mills. The opportunity was posted on August 6, 2026, with submissions required by August 17, 2026, at 4:00 PM. The place of performance is specified as Kayenta, Arizona, with a ZIP code of 86033, indicating the gloves must be delivered to this location. The contracting agency is the Navajo Area Indian Health Service under the Department of Health and Human Services, and the solicitation is accessible via the SAM.gov platform.
Navajo Area Indian Health Svc

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
Federal
Supply of 3,000 Magazine Pouches for Military/LE Use
Commanding General

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 315990
New
Federal
Men's Professional Short Sleeve Polo Supply
US Embassy Caracas

POSTED

3 days ago

DEADLINE

in 26 days
View Details
NAICS: 315990
New
Federal
Women's Tactical Jersey Short Sleeve Polo Supply
US Embassy Caracas

POSTED

3 days ago

DEADLINE

in 26 days
View Details
NAICS: 315990
New
Federal
Improved Outer Tactical Vests and Radio Pouches for Foreign Military Sales Case ZB-B-WGJ for Paraguay
Solicitation # 26-P-051507
The contract solicitation for Improved Outer Tactical Vests and Radio Pouches for Foreign Military Sales under Case ZB-B-WGJ for Paraguay is issued under solicitation number 26-P-051507 and is classified as a Small Business Set Aside with total set-aside status, reserved exclusively for small businesses. The solicitation was posted on August 6, 2026, and responses are due by August 13, 2026, at 3:00 PM Eastern Time. The procurement falls under NAICS code 315990, which covers other apparel and accessory manufacturing, indicating the items are specialized military gear produced to precise standards. The requiring agency is the Department of Defense, specifically the W6QK Acc-Apg office located in Aberdeen Proving Ground, Maryland, with the place of performance not explicitly defined. This is a combined contract action conducted through the Unison Marketplace reverse auction platform, designed to secure cost-effective solutions for international military support. Primary contact for inquiries is Unison Marketplace Support, reachable via email or phone for assistance with the bidding process.
W6QK Acc-Apg

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 315990
New
Federal
RFQ PERSONAL PROTECTIVE EQUIPMENT PURCHASE
Solicitation # W90VN926QA058
This solicitation, numbered W90VN926QA058, seeks quoted proposals for the purchase of personal protective equipment required for daily operational duties, with strict adherence to specified brands and quantities outlined in the solicitation documents. Only vendors located in South Korea are eligible to respond, as mandated by USFK 7150.01, ensuring local sourcing for this requirement. Should no submissions meet the technical criteria, the solicitation will be reissued to open participation to all interested vendors globally. The solicitation was posted on August 6, 2026, with a firm response deadline of August 17, 2026, and is classified as a combined type, targeting suppliers under NAICS code 315990. The contracting office, under the Department of Defense and identified as 0906 Aq Co Det A Contracti, is headquartered at APO AP 96218-5682, with Patrick Anderson serving as the primary point of contact for inquiries. Amendments to the solicitation will be issued to provide responses to questions raised during the RFQ period, and all submissions must be received through the designated SAM.gov portal.
0906 Aq Co Det A Contracti

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
Federal
Bench Stock Replenishment
Solicitation # FA469026Q0039
The contract titled Bench Stock Replenishment under solicitation number FA469026Q0039 is a Small Business Set Aside with a total set-aside designation, exclusively available to small businesses as defined by the SBA. It is classified under NAICS code 315990 and issued by the Department of Defense through the office FA4690 28 Cons Pkc located at Ellsworth Air Force Base in South Dakota, with a zip code of 57706-4947. The solicitation was posted on August 6, 2026, and responses are due by August 14, 2026, at 7:00 p.m. Eastern Time. The place of performance is also at Ellsworth Air Force Base, South Dakota, with no specific city or state details provided beyond the zip code. Primary point of contact is Noah Wilmore, reachable at 605-385-1748 or noah.wilmore@us.af.mil, with Jason Wright listed as secondary contact. The contract combines requirements and is accessible via the SAM.gov workspace link for full solicitation details.
FA4690 28 Cons Pkc

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

NAICS: 313110
New
DIBBS
THREAD
Solicitation # SPE1C1-26-T-1606
The contract specifies the procurement of cotton thread conforming to military specification A-A-52094, with a nominal length of 1650 yards per tube, a Z-twist finish, and a breaking strength of 28.0 pounds. The thread is olive drab in color, matched to the U.S. color association standard 66022, and features mildew-resistant treatment with a glazed surface. It is packaged in tube form under MIL-STD-2073-1E with packing code Q and labeling to comply with MIL-STD-129, with no special marking required. The item is identified by NSN 8310-01-710-5820 and is to be delivered in units of 10 tubes, with a strict zero variance allowed in quantity. Delivery must occur within five days of contract award, FOB origin, and the goods are destined for the Hellenic Air Force at Elefsis Air Base in Greece, with transportation coordinated per DLA procedures. The solicitation number is SPE1C1-26-T-1606, posted on August 9, 2026, with a response deadline of August 20, 2026. The required delivery date is August 12, 2026, and the item falls under NAICS code 313110. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The contracting organization is the Department of Defense through C and T Supply Chain, with Ryan Zarkowski listed as the primary point of contact. Packaging, marking, and freight forwarding must adhere strictly to DLA standards, and all items are subject to inspection and acceptance at origin. The contract is fully funded and intended for foreign military sales under a government user designation.
Fiber, Yarn, and Thread Mills

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488999
New
DIBBS
International Freight & FOB Destination Delivery
All Other Support Activities for Transportation

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense Information
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazard Communication Compliance & Safety Data Sheet (SDS) Management
Environmental Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 323111
New
DIBBS
Specialized Labeling and Tagging Services
Commercial Printing (except Screen and Books)

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
Manufacturing of Individual Equipment Bags (NSN 8465-01-690-3107)
Apparel Accessories and Other Apparel Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 315999
New
DIBBS
Tactical Work Gloves SupplyC AND T SUPPLY CHAIN is seeking qualified suppliers to provide men’s and women’s tactical gloves meeting the Mechanix MG55 specification, available in sizes SMALL through XX-LARGE, with full compliance to the required standards. The contract encompasses not only the manufacturing and supply of the gloves but also includes proper packaging, accurate labeling, and timely delivery to Philadelphia, PA. The solicitation, posted on August 5, 2026, has a response deadline of August 17, 2026, and is classified as a subcontract under NAICS code 315999. Performance activities are centered at Harrison, AR, with the place of performance listed as 72601-0000, though final delivery must reach the specified location in Philadelphia. All submissions must align with the detailed technical requirements outlined in the referenced spec sheet and adhere to federal procurement protocols.
Other Apparel Accessories and Other Apparel Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Logistics for Government ShipmentsThe contract covers the domestic transportation of packaged nylon duck cloth to Department of Defense facilities including DLA and military depots, requiring strict adherence to the Defense Transportation System guidelines. All shipments must be managed in compliance with federal logistics standards, and invoicing must be processed through the Web–based Application for Workforce and Finance (WAWF) system to ensure accurate financial reconciliation and document verification. The work is classified under NAICS code 484220, indicating a focus on truck transportation of freight, and the place of performance is designated as Phoenix, Arizona, with an estimated response deadline of August 19, 2026. This is a subcontract opportunity issued by C and T Supply Chain under the Department of Defense, and interested parties must respond by the specified deadline to be considered for award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Quality Testing and Certification ServicesC AND T SUPPLY CHAIN is seeking a subcontractor to perform independent testing and certification of nylon duck cloth to verify compliance with specified performance criteria including weight, water repellency, tensile strength, and color consistency. Each production lot must be tested in accordance with established standards, and a FAR 52.246-15 Certificate of Conformance must be issued for every lot to affirm that the material meets all required specifications. The work is to be performed at a designated location in Phoenix, Arizona, with a zip code of 85043. The solicitation was posted on August 5, 2026, and responses are due by August 19, 2026. This procurement falls under NAICS code 541380, which covers other scientific and technical consulting services, and is managed by the Department of Defense to support its supply chain requirements.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling of Military Textile ShipmentsThe contract requires military-compliant packaging, labeling, and palletizing of nylon duck cloth using four-way entry pallets, pressure-sensitive labels, and NSN/UPC barcodes in strict adherence to MIL-STD-129 and ASTM D-391 standards. All components must meet exacting defense logistics specifications to ensure compatibility with military supply chain operations, including durable labeling that withstands handling and environmental exposure. The work must be performed at the specified place of performance in Phoenix, Arizona, with the final product ready for deployment within the broader Department of Defense logistics framework. Submitted as a subcontract, the solicitation is managed by C AND T SUPPLY CHAIN under the NAICS code 561910, indicating a focus on support activities for transportation and logistics. The response deadline is August 19, 2026, with the solicitation posted on August 5, 2026, through the DIBBS platform. While no set-aside provisions or point of contact details are provided, the explicit reference to federal military standards underscores the critical need for precision, traceability, and compliance throughout the packaging and labeling process to support defense operational readiness.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 313230
New
DIBBS
Manufacturing of Water-Repellent Nylon Duck ClothThe contract requires the full-scale manufacturing of water-repellent nylon duck cloth adhering strictly to PIA-C-7219 specifications, encompassing all stages from weaving to final waterproofing treatments. The material must achieve consistent coloration to Orange 70072 and maintain rigorous batch traceability to ensure quality control and compliance across all production units. The production process must meet exacting standards for durability, water resistance, and dimensional stability as defined by the military-grade specification. The work is to be performed at a location in Phoenix, Arizona, with a response deadline of August 19, 2026, following a posting date of August 5, 2026. This subcontract falls under NAICS code 313230 for textile mill products and is issued by the Department of Defense through C AND T SUPPLY CHAIN. All delivered goods must be fully traceable to individual production batches and verified for conformance prior to acceptance, ensuring alignment with defense supply chain requirements and operational readiness standards.
Nonwoven Fabric Mills

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 315210
New
DIBBS
Supply of Mechanix-Style Work Gloves (NSN 8415016779241)The contract mandates the supply of 50 pairs of men’s and women’s work gloves meeting the MechaniX MG55 specification, ensuring compliance with rigorous performance and safety standards required for industrial and military use. All gloves must be packaged and labeled according to Department of Defense guidelines, including adherence to hazardous materials handling protocols and DLA-specific packaging requirements to ensure proper identification, storage, and distribution within government supply chains. The item is classified under NSN 8415016779241 and falls under NAICS code 315210, indicating production in the apparel knitting and weaving sector. The solicitation is issued by C AND T SUPPLY CHAIN under the Department of Defense, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. The place of performance is designated as Harrison, Arkansas, with zip code 72601-0000, indicating where the goods must be delivered or fulfilled. This contract is structured as a subcontract, and while no set-aside classification is specified, full compliance with DLA packaging, labeling, and hazardous materials regulations is mandatory. Interested parties must adhere to the submission timeline and technical specifications outlined in the DIBBS system via the provided link to be considered.
Cut and Sew Apparel Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details