Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Carbon Monoxide Gas Cylinder Supplier

Active

Federal

Response Deadline09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, posted by the Fluid Handling Division of the Department of Defense, seeks a supplier for 172 carbon monoxide gas cylinders under NSN 4940014427684. The cylinders must have a minimum shelf life of 18 months and be delivered to Tracy, California. The contract is designated as a Total Small Business Set-Aside under NAICS code 333310. All deliverables must adhere to strict military and safety standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Suppliers must ensure compliance with the Hazard Communication Standard 29 CFR 1910.1200 and DAG 26 for hazard labeling, and all cylinders must be accompanied by Safety Data Sheets. Responses are due by September 14, 2026.

General Info

DoD seeks small business supplier for 172 carbon monoxide cylinders by September 14, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-26-T-381L.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CYLINDER, GAS, CARBON

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies carbon monoxide gas cylinders for prime contractors delivering DLA Land and Maritime supply contracts. Provisions 172 units of gas cylinders (NSN 4940014427684) with a shelf life of 18 months. Packages per MIL-STD-2073-1E, marks per MIL-STD-129, and palletizes per RP001. Complies with Hazard Communication Standard (29 CFR 1910.1200) and DAG 26 for hazard labeling. Delivers cylinders with Safety Data Sheets (SDS).

Similar Contracts

Same NAICS industry code

HOUSING, IMAGE, INTENSIFIER

Solicitation # SPE4A7-26-R-0794

DLA Aviation-Richmond is conducting market research to identify qualified sources for the manufacture of image intensifier housings, specifically NSN 5855-01-442-6412, part number 264534-1. This sources sought notice is not a formal solicitation, but a request for capability information to determine the procurement method, which may result in a small business set-aside or full and open competition. The applicable NAICS code for this requirement is 333310. Interested parties must submit their organization details and tailored capability statements to Juline Tenorio by September 11, 2026. The government is seeking providers capable of managing the full production lifecycle, including the procurement of materials, manufacturing, inspection, testing, and logistics management. Evaluation will focus on the provider's technical resources, financial stability, and ability to implement a successful project management plan under a performance-based service acquisition contract.

POSTED

DEADLINE

RETICLE, OPTICAL INSTRUMENT

Solicitation # SPE7L1-26-Q-1398

This solicitation is for the procurement of five optical instrument reticles under NSN 6650-01-714-8642, with a delivery requirement of 200 days after receipt of order. The contract requires compliance with CMMC Level 2 certification and specifies that inspection and acceptance will occur at the point of origin. The contractor must provide the specific facility name, address, and CAGE code where the supplies will be available for government inspection. Quality assurance is governed by FCDD-ACE-QP 367, requiring adherence to MIL-PRF-13830B surface quality standards for scratch and dig specifications. To facilitate acceptance inspection, the government will provide surface quality standards on a loan basis, which must be used exclusively for this contract. The contractor is responsible for all shipping and insurance costs, must retain original packaging, and is required to return the standards to the government for certification every 12 months.

LAND SUPPLY CHAIN

POSTED

DEADLINE

PPE Extractor Washing Machines

Solicitation # 127EAY26Q0135

Solicitation 127EAY26Q0135 is a request for quotation issued by the Department of Agriculture for the Inyo National Forest to acquire five PPE Extractor Washing Machines. This acquisition is a total small business set-aside under NAICS code 333310. The required equipment must be Circul-Air Corp Express Pro model CACSM-35-Pro, featuring a 35 lb drum size with a 7 piece capacity, soft mount freestanding installation, and a wall drain. The machines must be pre-wired and programmed for detergent dosing pumps and include specific wash cycles safe for firefighting turnout gear, including settings for blood-born pathogens, liners, and outer shells. Technical requirements include a 120v 3 prong plug and a 10 minute spin cycle. Interested small business concerns must submit their quotations by the deadline of September 11, 2026.

Csa Southwest 1 Usda-Fs

POSTED

DEADLINE

K--AK-OFFICE OF THE RD-DEMO MECHANICAL FILE

Solicitation # 140FS126Q0140

Solicitation 140FS126Q0140 is a firm-fixed-price request for quotation issued by the Department of the Interior for the demolition and removal of an obsolete 5,000-pound mechanical mail filing machine. The work is located in the regional office mailroom at 1011 E. Tudor Rd, Anchorage, Alaska, and includes the safe disassembly of the equipment and the complete haul away of all associated debris. The project is intended to start as soon as possible, with a performance period from September 1, 2026, to October 25, 2026, and a target closing date of September 30, 2026. Normal duty hours for the project are Monday through Friday, 8:00 a.m. to 4:30 p.m. This procurement is a total small business set-aside. Award will be based on the most advantageous offer, where technical capabilities and past performance are weighted significantly more than price. Interested offerors must provide a technical approach narrative, a management plan identifying key personnel and subcontractors, and three examples of similar past performance with at least two valid references. Eligible vendors must maintain active registration in the System for Award Management and submit payment requests electronically through the Invoice Processing Platform. Quotes are due by September 3, 2026, and should be submitted to the contracting officer, Kathryn Coltran.

POSTED

DEADLINE

ACC-Orlando Hybrid PALT Industry Update - 08 September 2026

Solicitation # W900KK-ACCORLANDO-PALTSESSIONS-RSVP

The US Army Contracting Command–Orlando is hosting a Hybrid PALT Industry Update on Tuesday, 14 July 2026, from 1100 to 1200 ET at the Central Florida Tech Grove, located at 12809 Science Drive in Orlando, Florida. The event, organized in coordination with US Army CPE ST3 and USMC PM TRASYS, is designed to provide industry partners with updates on key procurement initiatives, particularly related to the Training Simulation Software and Training Management Tool (TSS/TMT) program, which supports multi-echelon Combined Arms Maneuver Training from Squad through Brigade levels in support of Multi-Domain Operations. Attendance is limited to 160 in-person participants and 300 virtual attendees via Microsoft Teams, with mandatory RSVPs required by Sunday, 12 July 2026, at 11:59 PM ET. Questions for the session must be submitted by Sunday, 5 July 2026, at 11:59 PM ET to ensure inclusion in the response queue; submissions after this date may not be addressed. In-person attendees must present a government-issued photo ID to access the facility and are strongly advised to park in the designated lot at the southeast corner of Science Drive and Technology Parkway due to limited on-site parking. Virtual attendees must join via a web browser—Chrome or Edge—without being signed into a Microsoft Teams account, and should use the provided URL to access the session, avoiding the Teams application. Alternative audio dial-in is available at +1 571-616-7941, with conference ID 776 094 929#. The session will not disclose sensitive procurement information that could compromise source selection integrity. The event supports the broader TReX II contract vehicle, with anticipated contract types including Firm Fixed Price, Cost Plus Fixed Fee, and Other Transaction Authority as needed. The program lifecycle spans development through sustainment, with expected contract durations varying by acquisition stream—ranging from one-year bases with four-year options to seven-year total periods including options, aligning with funding cycles from FY25 through FY34. Participation is governed by rules ensuring structured engagement, with workload point of contact information and session materials available on the ACC-APG public website.

W6QK Acc-Apg-Orlando

POSTED

DEADLINE

7E20--VR&E Equipment for Veteran

Solicitation # 36C10D26Q0189

Solicitation 36C10D26Q0189 is a competitive small business set-aside issued by the Department of Veterans Affairs, Office of Acquisition, Logistics and Construction, to procure specialized equipment for a veteran under the VR&E program. The requirement is solicited on a brand name or equal basis and focuses on the acquisition of a Roland VersaStudio BN2-30 30-inch print/cut color printer and a USCutter GFP 230C cold laminator. The procurement also includes essential consumables such as Roland TrueVIS GREENGUARD certified inks and cleaning solutions, VersaWorks Dual RIP software, a two-year trouble-free warranty, and professional installation services encompassing planning, deployment, and verification testing. The contract will be awarded as a single all-or-none purchase order to a responsible offeror based on a combination of price and technical factors, with technical requirements evaluated on a pass/fail basis. Performance is to be completed within 60 days after receipt of the order, with the place of performance located in Sanford, Maine. Offerors must submit their quotes in three specific volumes via email to the designated contract specialist, ensuring all line items in the equipment list are addressed to be eligible for award. Invoicing must be handled electronically in accordance with VAAR Clause 852.232-72, and delivery is specified as FOB Destination.

Veterans Benefits Administration (36C10D)

POSTED

DEADLINE

in about 8 hours

Supply of Thrust Washer Bearings (P/N 7225870)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Optical Instrument Eyeshields (NSN 1240-01-696-3637)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Mechanical Bearing Component SupplierThis subcontract, managed by the Department of Defense ASC Commodities Division, seeks a supplier to provide high-precision mechanical bearing parts for prime contractors under DLA Aviation supply contracts. The supplier is responsible for manufacturing or sourcing components that meet the specific technical and quality requirements for NSN 3120-01-673-6745, utilizing measuring and test equipment for quality verification. The selected provider must deliver individual bearing components along with comprehensive source approval documentation and quality certifications for critical application components. This opportunity falls under NAICS code 333310, with performance located in New Cumberland, Pennsylvania. The response deadline for this requirement is September 11, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CAMERA SUBASSEMBLY

Solicitation # SPE8EN-26-T-3109

This contract is for the procurement of 70 units of a camera subassembly, identified by NSN 6710-01-690-4503 and Thales Defense and Security part number V14563-17-01. Classified as a Commercial Off The Shelf item, the procurement is managed under solicitation SPE8EN-26-T-3109 and is designated as a Total Small Business Set-Aside. Delivery is required within 153 days, with a need ship date of February 15, 2027, and a final required delivery date of July 9, 2027. The agreement specifies delivery FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Compliance with several DLA technical and quality requirements is mandatory, including packaging standards per ASTM D3951 and MIL-STD-129, CMMC Level 2 self-assessment for cybersecurity, and specific guidelines for covered defense information. The contract explicitly notes that no approved technical data package is available from DLA Troop Support for this item.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

GAGE, TIRE PRESSURE,

Solicitation # SPE7LX-26-U-9661

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 1,187 tire pressure gages under NSN 4910002043170. The gages must be self-contained inflator types with a dual-chuck, standard bore, and long extension, featuring an inflation range of 10 to 160 PSIG. Technical specifications require an indicator bar of at least 0.250 inches square with black inch-pound markings in 2 PSI increments and red SI markings in 20 kPa increments. Materials must be corrosion-resistant, specifically stainless steel or brass, and the item is designated as a critical application item. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. A critical prohibition is placed on the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Delivery is required within 116 days, and the procurement is managed as a DLA direct coverage item within the continental United States.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

EYESHIELD, OPTICAL INST

Solicitation # SPE7M1-26-T-326M

This contract is for the procurement of 10 optical instrument eyeshields under solicitation number SPE7M1-26-T-326M for the Department of Defense Maritime Supply Chain. The items are identified by NSN 1240-01-696-3637 and part number LBT-2828Z. Delivery is required by April 14, 2027, with a delivery timeframe of 211 days after order. The agreement specifies that shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

MIL-STD-2073-1E Compliant PackagingThis subcontract with the Fluid Handling Division of the Department of Defense involves the specialized packaging of 69,000 metal tube assemblies for Department of the Air Force projects. The contractor is responsible for utilizing military-standard packaging materials in strict accordance with MIL-STD-2073-1E and must coordinate all necessary packaging inspections at production or other designated locations. The final deliverable consists of 69,000 units packaged and prepared for F.O.B. Origin shipment. This requirement falls under NAICS code 561910, with a response deadline set for September 11, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacturing of Metal Tube Assemblies (NSN 4710-00-283-4999)This subcontract involves the manufacturing of 69,000 Metal Tube Assemblies under NSN 4710-00-283-4999 for prime contractors supporting Department of the Air Force projects. The work is managed by the Fluid Handling Division of the Department of Defense and requires fabrication and assembly according to Reference Drawing N R 77445 Q4031285, Revision N R 8D. The production process utilizes precision metal forming equipment and requires the implementation of rigorous quality assurance protocols, as the components are designated as Critical Safety Items. The final deliverable consists of 69,000 completed and inspected assemblies that meet all specified Air Force quality requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-Q-1024

This contract is for the procurement of 69 metal tube assemblies under solicitation SPE7M4-26-Q-1024 for the Department of Defense Fluid Handling Division. The delivery timeline is set for 360 days after the order. The supplier must adhere to strict quality and security standards, including SAE AS9100 higher-level quality requirements and CMMC Level 2 certification via a Third-Party Assessment Organization. Additionally, the contract is subject to export controls under ITAR and EAR regulations, requiring approved JCP certification and specific training for the handling of technical data. The agreement mandates a rigorous first article inspection process involving three parts, where two are part of the production quantity and one is additional. These parts must undergo inspection per LPF-QAR-003, with one part being destructively tested and disposed of at the vendor facility. Both a test plan and a test report are required, preferably submitted in PDF format on an ISO-10149 compliant CD-ROM. Other key requirements include compliance with DLA packaging standards, source approval request documentation, and configuration change management protocols.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Metallic Tube and Fittings (Part 4710-01-261-4612)This subcontract, issued by the Department of Defense Fluid Handling Division, involves the supply of two units of metallic tube and fitting assemblies, specifically part number 4710-01-261-4612. The contractor is responsible for manufacturing or sourcing these components while ensuring strict adherence to ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. To qualify for inspection and acceptance, the provider must maintain a valid CAGE code and comply with the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. Interested parties must respond by September 9, 2026, to support prime contractors on DLA supply contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Ring Spacers (NSN 5365010546511)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Pressure and Temperature Relief Valve Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization

Freight Transportation Arrangement

POSTED

DEADLINE

Plastic Part Fabrication (NSN 005551845)

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

U.S.-Flag Ocean Freight Transportation

Deep Sea Freight Transportation

POSTED

DEADLINE

Supply of Straight FL Adapter (NSN 4730016157940)

Other Support Activities for Air Transportation

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the supply of 25 nonmetallic hose assemblies for prime contractors under the Department of Defense Fluid Handling Division. The supplier is responsible for manufacturing or sourcing assemblies that meet NSN 4720016123357 specifications, ensuring all items are physically identified and marked according to RQ017 and RQ011 standards. All deliverables must be packaged in accordance with DLA Packaging Requirements for Procurement RP001. The contract falls under NAICS code 326220 and specifies the place of performance in Tracy, California, with a response deadline of September 14, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

6-Inch 90-Degree Flow Angle Pipe Elbow Supply

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS