This Solicitation opportunity from Department Of Energy was posted on May 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Cartridge-based Full Ecosystem 3D Printer

Closed

6-B185-Q-00273-00Federal

Submission Closed05/21/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248

New

SLED

SOLE SOURCE REQUEST TO PURCHASE CEAD B.V. AM Flexbot

Solicitation # 9250-27-R-RFIN-00014

Mississippi State University has issued a sole source solicitation, identified as 9250-27-R-RFIN-00014, for the purchase of a CEAD B.V. AM Flexbot. This procurement action was posted on September 11, 2026, with a response deadline set for September 25, 2026. The contract is managed by the SLED organization type and will be performed within the state of Mississippi. Debra Raines serves as the primary point of contact for this request.

MISSISSIPPI STATE UNIVERSITY

POSTED

DEADLINE

INCUBATOR, BACTERIOLOGI

Solicitation # SPE2DH-26-T-6490

Solicitation SPE2DH-26-T-6490, issued by the DLA Troop Support Medical Supply Chain FSH, is a fixed-price request for the procurement of one Celerity 20 HP Bacteriological Incubator (NSN 6640-01-673-6905). This specialized equipment is designed exclusively to incubate and read activated Celerity 20 HP biological indicators, featuring eight wells set at 55-60 degrees Celsius and providing fluorescent reads within 20 minutes. The requirement is categorized under NAICS code 333248, with a delivery timeline of 20 days after receipt of order and a destination delivery point in APO 96319-5024. The contract mandates strict adherence to Medical Marking Standard No. 1 and requires commercial packaging in sealed unit containers to prevent damage. Administrative requirements include the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Compliance with various federal regulations is required, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Industrial Embroidery Machine Supplier

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Industrial Composter System Supplier

POSTED

DEADLINE

Solicitation # N0024426Q0110

Solicitation N00244-26-Q-0110 is a combined synopsis and request for quote for the procurement of one embroidery machine for the USS America. This is a 100 percent Small Business Set-Aside competition under NAICS code 333248, with a size standard of 750 employees. The resulting contract will be a Firm Fixed Price award, with payment processed via Government Purchase Card. The equipment must meet specific technical requirements, including a 10-needle count, a maximum speed of 1200 stitches per minute, a memory capacity of 400 million stitches, and specific sewing field dimensions for both flat and cap applications. Connectivity must include USB, direct PC connection, Wifi, and LAN. The award will be made on a Lowest Price Technically Acceptable basis, evaluating technical capability, price, and responsibility. Quotes must be submitted to Contract Specialist Keala Kia by 4pm PDT on September 16, 2026. The required delivery date is October 30, 2026, with the place of delivery located at the DDDC Shipping and Receiving facility in San Diego, California. Inspection and acceptance will be conducted by the government at the destination.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

FPC Alderson - Composter

Solicitation # 15B0AT26Q10100001

The U.S. Department of Justice, Federal Bureau of Prisons, is requesting quotes under solicitation 15B0AT26Q10100001 for the procurement, installation, and training of an industrial composter for the Federal Prison Camp in Alderson, West Virginia. This acquisition is a total set-aside for small businesses under NAICS code 333248. The required system must be capable of processing at least one cubic yard of mixed organic waste daily and feature continuous flow capabilities and institutional safety standards to support greenhouse operations and inmate vocational training for First Step Act credits. The government intends to make a single award based on the Lowest Price Technically Acceptable evaluation factor. Delivery and acceptance will be Freight on Board at FPC Alderson, with specific delivery dates to be negotiated at the time of award. Interested vendors must submit a fully burdened price quote, a specifications matrix, and technical documentation to Contracting Officer Charles Coushaine via email by 10:00 a.m. Eastern Standard Time on September 14, 2026.

POSTED

DEADLINE

Notice of Intent to Sole Source

Solicitation # N6264926QH047

NAVSUP FLC Yokosuka Site Marianas intends to award a firm-fixed-price, sole-source contract to Barbee Valve and Supply Inc for the procurement, delivery, and factory calibration of proprietary testing equipment. The acquisition includes a Hose Proof Test Stand, Relief Valve Test Bench, and Water Reclamation System, which are critical for ensuring the safety and structural integrity of flexible hose assemblies and piping systems for forward-deployed vessels. This procurement is conducted under FAR 6.103-1, as Barbee is the original equipment manufacturer and sole distributor of these proprietary systems. The notice is for informational purposes and is not a request for competitive proposals, meaning no formal solicitation will be issued. However, interested responsible sources may submit capability statements to Jason Perez and Patrick Collins by the deadline of September 25, 2026. The performance of this contract will take place in Santa Rita, Guam.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Industrial Sewing Machine Pocket Welt

Solicitation # W911S226U4463

Solicitation W911S226U4463 is a combined synopsis and request for quotation issued by the Department of Defense through the W6QM Micc-Ft Drum office for the procurement of one JUKI APW895N Pocket Welt Sewing Machine or an equivalent model. This requirement is designated as a Total Small Business Set-Aside under NAICS code 333248. The contract is managed by primary point of contact Corey Smith and secondary contact Greg Brown, with the place of performance located in zip code 10996. Interested vendors must submit their responses via the PIEE Solicitation module by the deadline of September 15, 2026. The evaluation process will be based on both price and technical factors to ensure the equipment meets all salient technical characteristics. Successful contractors will be required to complete delivery within 30 days of the award.

POSTED

DEADLINE

Supply of Bearing Unit Housings (NSN 3130014834037)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Chain Hoist (NSN 3950-01-591-8767)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Laboratory Scoop Supplier

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Gear and Shaft Assembly Manufacturing/Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Argonne National Laboratory, a Department of Energy contractor, is soliciting proposals for a cartridge-based 3D printer ecosystem under solicitation 6-B185-Q-00273-00. The requirement consists of a 30W, 120V 3D printer system and a parts cleaning system, including a build chamber, inert gas system with regulator, oxygen monitor, gas flow meter, powder cartridges, and maintenance and spare parts kits. The award will be made using the lowest price, technically acceptable methodology on a firm fixed-price basis. The package also includes requirements for installation, training, and a five-year warranty. Proposals must be submitted by 5:00 PM CST on May 21, 2026, to Laura Sanchez in Lemont, Illinois. To be considered, submissions must include a signed RFQ page 1, the country of origin for the equipment, and best and final pricing in US Dollars on page 2. The contract mandates strict adherence to quality and traceability standards, including the provision of certificates of conformance and calibration certificates traceable to NIST. Performance is subject to various federal and laboratory regulations, including FAR and DEAR clauses, PAAA compliance, and specific packaging and marking requirements to prevent counterfeit parts. Personnel accessing the site must provide REAL ID-compliant identification and complete mandatory safety orientations.

General Info

Argonne National Laboratory seeks a 3D printer ecosystem via lowest price technically acceptable.

Agency

Department Of Energy → Argonne National Labor - DOE ContractorView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

IL, USA

Set-Aside

NONE

Documents

(5)

ANL-407 Quality Assurance Procurement Requirements

DOCX•quality-assurance-requirements

ANL-70 Request for Quotation 6-B185-Q-00273-00

DOC•rfq

ANL-366L Low Risk On-Site Supplemental Conditions

PDF•contract-document

ANL-70A Pre-Award Representations and Certifications

PDF•reps-and-certs

Appendix A-71COM-22 Contract Terms and Conditions

PDF•7 pages•contract-document

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 18

Solicitation

Response DeadlineMay 21

Deadline has passed

Submission Closed

05/21/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Contacts1 person available

OfficeLemont, IL, 60439, USA

Organization / Agency

Department Of Energy → Argonne National Labor - DOE Contractor

View Agency Profile

Office AddressLemont, IL, 60439, USA

Contacts

Laura Sanchez

contact@example.gov

Full Description

*THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY*

Looking to source a cartridge-based, 30W, 120V 3D printer system and a parts cleaning system with a 5-year warranty. All requested parts and equipment can be found in the attached solicitation package.

Please review all applicable documentation and provide a proposal response no later than 5:00 PM CST May 21, 2026.

Please see attached solicitation package and ensure ALL 3 points are followed:

1. Please remember to sign page 1 of the RFQ document.

2. Please also remember to provide the country of origin.

3. Lastly please remember to fill out your BEST AND FINAL pricing on the individual line item boxes on page 2 with firm fixed-pricing in US Dollars.

Please be sure ALL 3 components are completed. NO SOLICITATION WILL BE CONSIDERED WITHOUT THESE COMPLETED. If any components are missing, your solicitation will be discarded.

Any questions can be directed to the Contracting Officer.

Thank you in advance for your participation.