Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CARTRIDGE, COMPRESSE

Active
SPE8E6-26-T-3865Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE8E6-26-T-3865 calls for the procurement of 2,560 units of CARTRIDGE, COMPRESSE, identified by NSN 4220-01-701-9119 and part number S-1781-1 from SWITLIK PARACHUTE COMPANY, INC. The item is classified as a critical application product and must be delivered FOB destination within 84 days of award, with no tolerance for quantity variance. Delivery is required to the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, with a need ship date of October 30, 2026, and an original required delivery date of November 28, 2026. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. Hazardous materials requirements under the Hazard Communication Standard apply, mandating submission of Safety Data Sheets and HCS-compliant labels prior to award, along with employee training per OSHA’s 29 C.F.R. 1910.1200. The contract incorporates technical and quality requirements referenced in the DLA Master List and includes provisions for removal of government identification from non-accepted supplies. All documentation, including source approval requests, must meet specified federal standards.

General Info

Procurement of 2,560 compressed cartridges under DLA solicitation SPE8E6-26-T-3865 for federal use.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-3865.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS

Full Description

Show more
CARTRIDGE,COMPRESSE
CARTRIDGE,INFLATOR,FLOTATION GEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data
SPE8E6-26-T-3865
SECTION B
sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
CRITICAL APPLICATION ITEM
SWITLIK PARACHUTE COMPANY, INC. 78673 P/N S-1781-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585518 0001 EA 2,560.000
NSN/MATERIAL:4220017019119
DELIVERY (IN DAYS):0084
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:1 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
TEXT. All SPECIAL REQUIREMENTS IN PACKAGING ZZ, REFER TO STO ZD072, HAZMAT STATEMENT IN PURCHASE ORDER
PARCEL POST ADDRESS:
W25G1U
SPE8E6-26-T-3865
SECTION B
PR: 7017585518 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/30/2026 Original Required Delivery Date:11/28/2026
SPE8E6-26-T-3865 NSN/Part Number: 4220-01-701-9119 Quantity: 2,560 EA Purchase Request: 7017585518QTY: 2560 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN-RIVETThis contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-00-448-8245 and part number HL20PB6-15, classified as a commercial item under DLA specifications. A total quantity of 839 units is being ordered across three delivery lines with one unit at 2 EA, another at 170 EA, and the largest at 667 EA, all priced at $1.00 per unit with no variance allowed in quantity. The item is designated a critical application item and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede any conflicting standards like ASTM D3951. Packaging and marking must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The product must be delivered FOB origin with inspection and acceptance occurring at destination, and delivery is required within 169 days with a need ship date of January 20, 2027, and original delivery target of March 25, 2027. Multiple approved suppliers including SPS Technologies, Huck International, West Coast Aerospace, and others are identified for this item. All packaging and labeling must remove government identification if supplies are not accepted and must be physically marked in accordance with RQ017. The contract also incorporates requirements for source approval documentation, covered defense information handling, and unit of issue compliance based on DoD standards. Deliveries are directed to three DLA distribution depots located at Hill AFB, Texarkana, and San Diego.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThis contract pertains to the procurement of a retaining ring, identified by NSN 5325-01-504-8510 and part number 00001-0005, with a quantity of 13 units to be delivered in one week of lead time, specifically within 166 days from contract award. The item is designated as a critical application component, subject to strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and must conform to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking specifications. Packaging and preservation must adhere to DLA procedural guidelines, explicitly prohibiting any intentional use of mercury or mercury compounds in preservation, packaging, or marking materials, with narrow exceptions limited to functional components such as batteries, sensors, or instruments approved by NAVSEA, which must include secondary containment. Sampling and inspection protocols follow MIL-STD-1916 or equivalent zero-defect-based plans with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively, requiring complete zero non-conformances in sampled lots unless otherwise specified. Delivery is FOB origin, with inspection and acceptance occurring at origin, and no tolerance is permitted for quantity variance. The item is to be delivered to the DLA Distribution San Joaquin facility in Tracy, California, with a required ship date of January 17, 2027, and the original delivery deadline set for January 7, 2027. The solicitation was issued under contract SPE4A6-26-T-09QL and closed for responses on August 3, 2026, with a unit price of $13.00 per unit and a total contract value of $169.00.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
ANODE, CORROSION PREThis contract is for the procurement of eight corrosion-preventing anodes identified by NSN 5340-01-691-7061 and part number H535-0503-PN-163, sourced from Electric Boat Corporation and Leidos Engineering & Sciences, LLC. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Ozone-depleting chemicals are strictly prohibited in any component, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, cushioning, and container type, and all marking must follow MIL-STD-129 with no special marking codes. The anodes are to be delivered FOB origin within 165 days, with zero tolerance for quantity variance. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must conform to DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-878K, with a response deadline of August 6, 2026, and a required ship date of January 19, 2027, against an original delivery date of August 29, 2027. Contact for inquiries is Isabelle Szulewska at DLA, with the North American Industry Classification System code 332510.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAININGThe contract pertains to the procurement of four retaining clips identified by NSN 5340-01-564-7493 under solicitation SPE4A1-26-T-2488, with a required delivery within 20 days of contract award and a final delivery date set for July 20, 2026. The item is to be delivered FOB origin and inspected and accepted at the destination, with zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable version determined by the solicitation or award date depending on acquisition size. The supplier must comply with stringent packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging (unless classified as hazardous, in which case FED-STD-313 applies), and DLA Packaging Requirements (RP001) for palletization. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, and the item is exempt from Unique Identification under DFARS 252.211-7003(c)(1)(i) as specified by the Service customer. The supplier, Sikorsky Corporation (CAGE 78286), is subject to an approved alternate sampling plan QAP 1201 based on Attribute Single Statistical Acceptance Sampling that must meet or exceed the standards of ASQ H1331 or MIL-STD-1916. The contractor must also comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and implement configuration change management through Engineering Change Proposal procedures, as well as adhere to non-tailored quality requirements under ISO 9001:2015 for both manufacturers and non-manufacturers. Measuring and test equipment used must meet specified calibration standards. Delivery is directed to US Army APS 2, 2 SSA 405 AFSB in Powidz, Poland, under shipment RDD 777, and transportation logistics are governed by DLAD Procurement Notes C19 and C20. The contract mandates that all government identification be removed from non-accepted supplies and that physical identification of bare items follow specified marking protocols. The contracting officer is Alaska Jones, and the solicitation response deadline is August 3,
AVIATION SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, HOLLOWThis solicitation, SPE4A7-26-T-594U, is a total small business set-aside for the procurement of PIN, HOLLOW with NSN 5315-01-112-5553 and a quantity of 251 units under purchase request 7017586007, requiring delivery within 84 days. The solicitation explicitly prohibits Fast Pay and encourages offerors to submit quantity ranges due to fluctuating demand and frequent adjustments to open purchase requests, allowing the buyer flexibility in awarding without administrative delay. Offerors must not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, requiring full disclosure of non-domestic materials. Small business joint ventures must submit the applicable representations for small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, or HUBZone certifications as mandated by FAR provisions. All contractors must register via DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA, with WebServices users required to update their internal schema by the specified deadline. Additive manufacturing is not permitted unless explicitly approved by the contracting officer, and any proposal including AM-produced items will be deemed ineligible. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumptions of non-responsiveness. The NAICS code is 332510, and the point of contact is Brad Ingram.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECKThe contract specifies the procurement of two bronze body, 4-inch flanged check valves with part number 104P3.8 from APCO/VALVE & PRIMER CORP, identified by NSN 4820-01-141-5742. The item is classified as a critical application and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, incorporating all applicable R and I codes. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, and specific chemical reagents; portable devices containing mercury must be shock-proof with a secondary containment boundary as per NAVSEA 5100-003D. Paint finishing requirements from Army drawings are superseded by DCSC Drawing 16236 CS-2300-0001, which governs chemical agent resistant coatings and high-temperature finishes. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking code. Units are to be delivered FOB origin with zero quantity variance, inspected and accepted at destination, and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The required delivery date is October 14, 2026, with a 240-day delivery window, and the contract requires shipment no later than April 4, 2027. The solicitation number is SPE7MC-26-T-154V, issued under NAICS code 332911, with the point of contact being Paula Mcclary of the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThe contract specifies the procurement of four safety relief valves with a bronze body and 1/2 inch flanged end connections, capable of an adjustable pressure range of 18 to 26 psi and designed for use with water, oil, and gas media. The flow control device, seat, and stem are made of nickel alloy, and the valve must be manufactured by Hunt Valve Company, Inc. under part number D50553 and R10AD2D2BM-BM3. Strict prohibitions against intentional incorporation of mercury or mercury-containing compounds apply, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable mercury-containing devices must be shock-proof and include a secondary containment boundary in compliance with NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific coding for preservation, wrapping, and container types, and palletization must follow DLA procurement standards. Inspection and acceptance occur at the destination, and delivery is FOB origin within 200 days, with the required ship date set for February 23, 2027. The NSN is 4820012615348, the purchase request is 7017383832, and the contract number is SPE7MC-26-T-155M. All shipments are to be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation protocols governed by DLA procedural notes C19 and C20.
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of a LIGHT, INDICATOR with NSN 6210-01-334-2919 and part number 11460090-1, governed by stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. All items must comply with MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Production lot testing is mandatory for all lots, and test items are not to be destroyed during evaluation. The item is classified as a Critical Application Item, requiring adherence to TDP Rev A Gen 1 per reference drawing 18876 11460090-1 dated 09/01/2023, and must meet cybersecurity requirements under CMMC Level 2 via self-assessment. Packaging must conform to ASTM D3951 and be marked per MIL-STD-129, with palletization following DLA Packaging Requirements. The contract specifies a zero variance in quantity, with inspection and acceptance occurring at origin. The order consists of two line items: the primary item for 105 units at $105.00 each, and a secondary line item representing the mandatory production lot test requirement. Delivery is required FOB origin within 231 days, with an original delivery date of March 26, 2027. All packaging and labeling must reflect the specified U/I and QUP as defined in the contract, with no exceptions permitted. The supplier must provide a Certificate of Conformance unless explicitly prohibited by a Quality Assurance Letter of Instruction. The contract is a total small business set-aside under NAICS 334419, issued by the Department of Defense through the DDSP New Cumberland Facility. Shipping instructions and transportation protocols are governed by DLAD Proc Notes C19 and C20, with the delivery destination clearly identified as New Cumberland, PA. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and point of contact is Kelly Mitchell.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATEThe contract pertains to the procurement of a gate valve with NSN/part number 4820-01-550-2905, with a quantity of 144 units, under solicitation number SPE7MC-26-T-155A. Delivery is due in 397 days from the award date, and the procurement is managed by the Defense Logistics Agency through the DOD’s New Cumberland facility, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the NAICS code 332911 identifies the industry classification. The primary point of contact is Paula McClary, reachable via email and phone provided. Technical data associated with this valve is subject to U.S. export control regulations under either ITAR or EAR, meaning its disclosure to foreign persons, including employees of foreign subsidiaries of U.S. companies, both inside and outside the United States, requires prior authorization from the Department of State or Commerce. Distribution of this data is strictly limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on export-controlled technical data handling, and have passed the DLA Export-Controlled Technical Data Questionnaire. DFARS 252.225-7048 governs the handling and dissemination of this controlled information, ensuring compliance with federal export restrictions.
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTIONThis contract pertains to the procurement of a linear directional control valve specified as NSN 4820-01-207-9290 with part numbers 2CT402 from OSHKOSH DEFENSE LLC and 60650-44 from PARKER-HANNIFIN CORPORATION, limited to a restricted source requiring government engineering approval due to its critical application. The item is subject to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with RP001 DLA Packaging Requirements for Procurement and MIL-STD-129 labeling, with unit packaging in accordance with QUP 001 and palletization following specified guidelines. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the full quantity of 15 units must be delivered within 215 days of the award date, with an original required delivery date of April 3, 2027 and a need ship date of March 10, 2027. The purchase request number is 7017601394 with a unit price of $15.00 per unit for a total contract value of $225.00, and all shipments must be addressed to the DLA Distribution facility in New Cumberland, PA. The solicitation is a total small business set-aside under NAICS code 332912, issued under contract SPE7MC-26-T-154X, with responses due by August 6, 2026, and the contract is managed by the Department of Defense through the DDSP New Cumberland Facility.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
GEAR OPERATOR, VALVEThe contract is for the procurement of a Gear Operator, Valve with NSN/Part Number 4820-01-667-9831, under solicitation SPE7MC-26-T-154U, requiring a quantity of two units to be delivered within 88 days after order. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents as defined by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, and its disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization; only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval may access the data. The contract is managed by the DDSP New Cumberland Facility under the Department of Defense, with primary point of contact Paula Mcclary, and responses are due by August 6, 2026.
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
STRAINER, WASTE DRAIThis contract specifies the procurement of a Strainer, Waste Drain with NSN 4510-01-649-3042 and part number DD 20 C 100, under solicitation SPE8E8-26-T-4851, for a total quantity of 260 units at a unit price of $260.00, with a total contract value of $67,600. The item must be delivered FOB origin within 72 days of the contract award, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, cushioning, and containerization. The item is subject to MIL-STD-130N for identification marking of U.S. military property, and government identification must be removed from non-accepted supplies. Packaging and palletization must adhere to DLA’s procurement requirements, with all markings conforming to the specified codes and no special marking required. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details are governed by DLAD procedural notes C19 and C20. The contract is a total small business set-aside under NAICS code 332913, with a response deadline of August 6, 2026, and a required delivery date of July 24, 2026. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with Alexis Selby listed as the primary point of contact.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
RING BUOY, LIFESAVINGThe contract is for the procurement of 20 lifesaving ring buoys identified by NSN 4220-01-695-4232, with a unit of issue of each and a total value based on a fixed unit price. The item is classified as a commercial item and must comply with strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001, and all materials must be free of asbestos and any intentional addition of mercury or mercury-containing compounds, except for specific approved uses such as batteries, fluorescent lights, or instrument controls that meet NAVSEA standards. Portable devices containing mercury must have shockproof construction and secondary containment. Delivery is required FOB origin within 164 days, with inspection and acceptance points at the destination. The designated delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is January 3, 2027, with a need ship date of January 18, 2027. The contract prohibits any variance in quantity and mandates full compliance with all documentation, source approval, and government identification removal requirements. The sole authorized suppliers are West Marine Products Inc DBA Port 0urt0 and Texas Boom Company LLC, both with the part number JBO-X-30.
All Other Rubber Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
VALVE ASSEMBLYThe contract specifies the procurement of a valve assembly with NSN 4810-01-658-7068 and part number 10017-2, under solicitation SPE7MC-26-T-154Y, for a quantity of seven units at a unit price of $7.00, totaling $49.00. Delivery is required within 165 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, utilizing specific materials as defined by codes CA for surface protection against abrasion and corrosion, and AD for rigid low-density cushioning such as fiberboard or cellular plastics. Wood and plywood used for blocking and bracing must meet ASTM-D6199 and A-A-55057 standards respectively, with structural members conforming to class 1 and non-critical members to class 3. All valve openings must be sealed with noncorrosive plastic plugs to prevent contamination. Marking must follow MIL-STD-129, including the special marking code ZZ requiring an “ARROW UP OPEN THIS SIDE” indicator, and serial numbers must appear on all container levels. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original required delivery date is August 22, 2027, with a needed ship date of January 19, 2027. Technical and quality requirements are governed by the DLA Master List, and configuration changes or deviations require formal engineering change proposals. The contracting activity falls under the Department of Defense, with Paula Mcclary as the primary point of contact.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details