Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CASE, AED, SEMI RIGID

Active
SPE2DS-26-T-276AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two semi-rigid carry cases designed exclusively for the PowerHeart G5 AED, featuring an adjustable shoulder strap, a side D-ring for attaching the PowerHeart Ready Kit, and a back pocket for storing extra pads and emergency supplies. The case is engineered to maintain clear visibility of the AED’s status indicator and pad expiration date at all times. Each unit must be packaged in a sealed commercial container that protects against damage and complies with the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging and shipping must ensure safe delivery by the lowest-cost carrier to the specified destination in Norfolk, Virginia, using traceable freight methods only—parcel post is prohibited. The item is not regulated by the FDA and must be marked per the latest MMS No. 1 guidelines, with sourcing and part number XCAAED004A from ZOLL Medical Corporation identified by the bidder. Delivery is required within 20 days of contract award, with no variance in quantity allowed, and inspection and acceptance occur at the delivery point.

General Info

Two G5 AED carry cases with straps and storage, delivered to Norfolk, VA, in 20 days, per MMS No. 1, no FDA regulation.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

471 EAST C ST., NORFOLK, VA, 23511, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-276A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
CHANDLER ALVAREZ
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASE,AED,SEMI RIGID
CASE,AED,SEMI RIGID
POWERHEART G5 AED SEMI-RIGID CARRY CASE<(>,<)>
THIS SEMI-RIGID CARRY CASE WITH ADJUSTABLE
SHOULDER STRAP FOR USE WITH POWERHEART G5
AUTOMATIC AND SEMI-AUTOMATIC AEDS; THE CASE
PROVIDES A D-RING ON THE SIDE TO ATTACH THE
POWERHEART READY KIT AND THE BACK POCKET
PROVIDES EXTRA STORAGE FOR ADDITIONAL PADS<(>,<)>
AND OTHER NEEDED ITEMS; THE DESIGN ENSURES
THAT THE AED INDICATOR AND THE PADS
EXPIRATION DATE ARE CLEARLY VISIBLE AT ALL
TIMES
.
UNIT OF ISSUE EACH
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE2DS-26-T-276A
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
NOT REGULATED BY THE FDA.
.
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
ZOLL MEDICAL CORPORATION 0UJ27 P/N XCAAED004A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017628388 0001 EA 2.000
NSN/MATERIAL:6515016539865
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
SPE2DS-26-T-276A
SECTION B
PR: 7017628388 PRLI: 0001 CONT’D
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
N32205
MSCHQ NORFOLK
471 EAST C ST.
NORFOLK VA 23511
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N32205
MSC WAREHOUSE
1968 GILBERT STREET
NAVAL BASE BLDG W143 DW 10
NORFOLK VA 23511-2313
US
M/F: (TCN) N243056205S209
RDD: 226
PROJ: HJ5 TP 2
SUPP ADD: N32205 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: 9B ADV: 2A FC: E5
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE2DS-26-T-276A NSN/Part Number: 6515-01-653-9865 Quantity: 2 EA Purchase Request: 7017628388QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
International
HealthPRO RFP - ORTHOPEDIC CONTRACTSHealthPRO is soliciting proposals for a comprehensive suite of orthopedic contracts commencing December 1, 2026, covering a wide range of surgical systems and devices across multiple anatomical regions and procedures. The solicitation includes eight distinct contract lines spanning arthroscopic fluid management, mechanical resection and ablation systems, small joint and shoulder/elbow arthroscopy, hip and knee arthroscopy, mini to large fragment systems, external fixation, intramedullary nails for long bone fixation, hand and wrist reconstruction, foot and ankle reconstruction, and total ankle replacement systems. All submissions must be submitted in two envelopes with a hard deadline of Wednesday, September 9, 2026, at 12:00 PM ET, and bidders are required to access the full RFP documents by emailing a specified address with detailed company and contract information included in the body of the message. The procurement is managed by 3sHealth on behalf of the Saskatchewan Public Sector, with Gabriela Garcia designated as the primary point of contact for inquiries, and all responses must adhere strictly to the submission guidelines outlined in the official solicitation packet.
3sHealth

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339112
New
DIBBS
CATHETER, INTRAVENOUSThe contract is for the procurement of 3 packages of intravenous safety catheters, each package containing 200 units, with a total quantity of 600 catheters. Each catheter is a 16-gauge, 1.25-inch straight needle with a passive safety design featuring a push-off plate on the hub that automatically engages the safety clip when the bevel exits the catheter hub; the bevel orientation is visibly indicated on the push-off plate. The catheter is constructed from fluorinated ethylene propylene (FEP) polytetrafluoroethylene and is available without wings, enclosed in a plastic polyurethane overall. The product is sterile and intended for intravenous injection. The unit of issue is PG/200 each, and delivery is required within 20 days of award. The item is identified by NSN 6515-01-488-4971 under solicitation SPE2DS-26-T-276C, with bids due by August 3, 2026. Technical and quality requirements referenced in the DLA Master List apply, and packaging must comply with DLA standards. Covered defense information may apply, and government identification must be removed from any non-accepted supplies. The procurement is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance occurring at FPO, ZIP 96694. Bidders must specify the source and part number being supplied.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
WHOLE BLOOD COLLECTThe Whole Blood Collect kit is a compact, vacuum-sealed system designed for field forward missions in remote and austere environments, enabling the safe collection and transfusion of fresh whole blood without reliance on traditional blood bank infrastructure. It meets or exceeds current blood bank standards, military guidelines, and training protocols, ensuring clinical compliance and operational readiness. The kit functions as a standalone skill set module, providing all essential components needed for in-the-field blood donation and transfusion procedures, and is also suitable for training and instructional use. Included are an oral questions form, DD572, Standard Form 518, and a field blood transfusion unit, all integrated into a single, ready-to-deploy package. The contract, solicited under SPE2DS-26-T-275C, is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a place of performance at Camp Pendleton, California. A quantity of 50 units is required, to be delivered within five days of award, under purchase request 7017595160. The National Stock Number for the item is 6515-01-657-4750, classified under NAICS code 339112. The solicitation was posted July 27, 2026, with responses due by August 3, 2026, and the primary point of contact is Michael Small, reachable via email and phone for procurement inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, SURGICALSurgical tubing made of plastic with a 3/16 inch inner diameter is being procured under contract SPE2DS-26-T-276L, with the manufacturer part number 0048250 from CONMED Corporation. The item is supplied in 100-foot coils, with a total quantity of 25 coils required, and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951 and MIL-STD-129. Packaging must adhere to the Medical Marking Standard No. 1, with each unit sealed in a protective container and shipped in suitable commercial exterior packaging to ensure safe delivery at the lowest freight cost. The product is regulated by the FDA, requiring a referral to the product specialist in EBS prior to award, including bidder and manufacturer details. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination point. All packaging and marking must follow the DLA-defined medical standards, and physical shipment must be sent via traceable freight methods, not parcel post. The delivery address is Scott AFB, Illinois, with a required original delivery date of July 29, 2026, and the contract is managed by the Department of Defense Medical Supply Chain under the NAICS code 339112.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CAP, SYRINGEThis contract specifies the procurement of sterile Luer-lock tip syringe caps in red, manufactured by Baxter Healthcare Corporation with part number H93865001 and NSN 6515-01-252-7552. The item is classified as a Type I CODE S medical device with a fixed 60-month shelf life that cannot be extended, and it is subject to FDA regulation requiring confirmation referral through EBS prior to award. Each procurement unit is defined as a packing group (PG) containing 100 individual caps, with a total quantity of one PG ordered. The item must be packaged in commercial-grade sealed unit containers and shipped in suitable exterior containers to ensure safe delivery at the lowest carrier rate, compliant with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging and marking must adhere to MIL-STD-2073-1E and include no government identification on non-accepted supplies. The contract mandates strict adherence to DLA’s technical and quality requirements as listed in their Master List and requires bidders to clearly identify the source and part number being offered. Delivery is due within 20 days FOB destination, with zero tolerance for variance in quantity and final inspection and acceptance occurring at the delivery point. The procurement is governed by solicitation SPE2DS-26-T-274M, issued by the Department of Defense, Medical Supply Chain, with performance located at Nellis AFB, 89191.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MANIFOLD ASSEMBLY, ASPIThe contract pertains to the procurement of two units of the Manifold Assembly, Aspirator, identified by NSN 6515-01-699-5453, for use in medical acquisitions. Each unit must be delivered within 20 days of award and is governed by strict packaging and marking standards, including compliance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must ensure protection against damage, with each unit sealed in a suitable container and shipped in commercial exterior containers that guarantee safe, low-cost delivery to Scott AFB, Illinois, via common carrier. All supplies must be properly labeled according to MMS No. 1, and copies of this standard are available through DLA Troop Support. The contract incorporates technical and quality requirements from the DLA Master List, and bidders must clearly specify the source and part number being supplied. The procurement is subject to DLA packaging requirements and the potential handling of covered defense information. The solicitation, numbered SPE2DS-26-T-275R, was issued on July 27, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DRESSING, CHEST SEAL WOThe dressing is a 6-inch by 6-inch individual occlusive chest seal designed for rapid deployment in combat environments to seal life-threatening penetrating chest wounds. It features a super adhesive backing and is constructed from clear, durable material to ensure visibility and reliability under harsh conditions. The product is sealed in an easy-to-open protective package that allows quick access even in low-light or windy settings, ensuring soldiers can apply it effectively under battlefield stress. It does not include a needle and is intended solely as a wound-sealing device. The item has a mandatory 60-month shelf life, with no extension permitted, and no more than nine months may have elapsed from the manufacturer’s production date to the date of delivery to the government. It is identified by NSN 6510-01-532-8019 and is subject to strict defense information controls and packaging requirements. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract is part of a federal procurement under solicitation SPE2DS-26-T-275J, with a delivery deadline of 10 days after order placement and is managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SHUNT SET, CAROTID ARTEThe contract specifies the procurement of argyle carotid shunt sets, each containing four sterile, disposable polyvinyl tubes measuring six inches in length with respective inner diameters of 8, 10, 12, and 14 French sizes, all featuring a radiopaque line for visual guidance during surgical procedures. These shunts are intended for use in carotid artery plaque removal and are packaged ten sets per case, with the unit of issue being a package of ten. The item is identified by NSN 6515-01-181-0342 and the contract calls for a quantity of two packages, requiring delivery within five days of award. Technical and quality standards referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Packaging must conform to DLA requirements under RP001, and covered defense information provisions under RD003 apply. The bidder must clearly identify the source and part number being offered, and the contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, and point of contact is Marcos Aliaga.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
INFUSOR, PRESSURE, BLOODThe contract is for a disposable pressure infusor with a 1000ml blood collecting-dispensing bag, featuring a dual-pressure safety valve, one-handed pressurization and deflation, and a rigid hanger designed to slip securely over IV poles without puncturing the fluid bag, even during pressure loss. The unit is non-sterile, measures 7.25 inches in width, 6.00 inches in thickness, and 11.75 inches in length, and is packaged in a box containing twelve units. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. The item is identified by NSN 6515-01-706-5795, with a single box ordered under purchase request 7017630040, requiring delivery within 20 days after order. The bidder must specify the source and part number being supplied and ensure the product is marked according to the latest Medical Marking Standard No. 1. The solicitation, issued under SPE2DS-26-T-276J, incorporates technical and quality requirements from the DLA Master List, adheres to DLA packaging standards, and includes requirements for removing government identification from non-accepted supplies. The contract is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance at Scott AFB, ZIP 62225-5252.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, PARTICULATE FIL
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
LANCET, FINGER BLEEDING
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
STRIPPER.DONOR TUBINGThe contract specifies the procurement of four units of STRIPPER.DONOR TUBING, a medical device designed to safely strip undiluted blood from donor tubing into collection containers without damaging red blood cells, featuring plastic rollers over metal pins for efficient and gentle operation. All units must be packaged in sealed, commercial-grade containers that protect against damage or breakage and packed in suitable exterior shipping containers compliant with commercial standards to ensure safe, cost-effective delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after award. The product must be marked in accordance with Medical Marking Standard No. 1, replacing all previous references to MIL-STD-129, and bidders must clearly state the source and part number being supplied. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the applicable revision date tied to the solicitation or award date. The contract falls under NAICS code 339112 and is administered by the Department of Defense's Medical Supply Chain, with the NSN 6515-01-698-2417 and solicitation number SPE2DS-26-T-274H.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
GLOVE, NITRILEThe contract is for the procurement of 12 boxes of nitrile patient examination gloves, each box containing 90 gloves, with specifications requiring the gloves to be textured for enhanced wet and dry gripping, longer and thicker than standard exam gloves, form-fitting with an extended beaded cuff, ambidextrous, non-sterile, disposable, latex-free, powder-free, and sand-colored in size X-large. The item is identified by NSN 8415-01-600-6052 and delivered FOB destination to a specified address in Boise, Idaho, with a strict delivery requirement of 20 days after award. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), ASTM D3951 for non-hazardous materials, and MIL-STD-129 or Medical Marking Standard No. 1 for medical items, including mandatory barcoding and labeling per government standards. The gloves are non-hazardous and do not require hazardous material packaging controls under FED-STD-313 or TQ IP025. Invoicing and payment processing are exclusively through Wide Area WorkFlow (WAWF), and acceptance of goods occurs at the delivery point by government representatives under FAR 52.246-2. The solicitation, issued by the Department of Defense’s Medical Supply Chain, requires offerors to provide their Unique Entity ID and CAGE code and to certify their small business status and compliance with socioeconomic programs. All contractors must adhere to stringent cybersecurity requirements under DFARS 252.204-7012, including safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on using equipment or services from designated foreign telecommunications vendors. Compliance with whistleblower protections, restrictions on compensation of former DoD officials, and requirements for hazard communication labeling are mandatory. The contract incorporates numerous FAR and DFARS clauses including those related to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and subcontracts for commercial services. No unit prices or contract value are provided in the solicitation, and award will be based on the lowest price technically acceptable response. All submissions must be made electronically via the DIBBS portal by the closing date of July 30, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 322291
New
DIBBS
WICK, EARThe product is a sterile, latex-free, non-lining, and non-adherent ear wick designed specifically for otolaryngology procedures, particularly for the treatment of otitis externa. It features high absorbency, is non-traumatic, virtually lint-free, and compressed for ease of use, ensuring minimal discomfort and optimal performance during surgical or clinical applications. The item is not made with natural rubber latex, meeting strict safety standards for sensitive users. Each unit of issue is a case containing 100 wicks, identified by NSN 6510-01-724-9619, with a single case ordered under purchase request 7017625843. Delivery is required within 20 days of award. This solicitation, identified as SPE2DS-26-T-275F, was posted on July 27, 2026, with responses due by August 3, 2026. The procurement falls under NAICS code 322291 and is managed by the Department of Defense via the Medical Supply Chain MD Surg FSF. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and specific protocols for removal of government identification from non-accepted supplies. The point of contact is Kendall Jones, reachable via email and phone, and the place of performance is FPO with ZIP 96694. The solicitation is open to federal contractors under no set-aside designation.
Sanitary Paper Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICALThe contract solicitation SPE2DS-26-T-251W is for the procurement of surgical sponges designated as a medical device by the FDA, with each sponge measuring 4 inches by 4 inches and packaged in precut envelopes—25 per box, with 600 boxes total as the unit of issue. The sponges are intended for use around drains, catheters, intravenous infusions, hyperalimentation, and dialysis procedures. Delivery must be completed within five days of order placement under FOB Destination terms, with inspection and acceptance occurring at the point of delivery. The packaging and marking must strictly adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and preservation and packing must comply with MIL-STD-2073-1E. All materials must be marked in accordance with DLA’s MMS No. 1, and commercial packaging standards must be followed without reliance on military specifications except where explicitly required. The contract is a total small business set-aside under NAICS code 339113, with automated award likely based on Lowest Price Technically Acceptable methodology. Pricing is not specified in the document, rendering the total contract value indeterminate. Contractors must be registered in SAM, possess a Unique Entity ID, and comply with cybersecurity requirements under FAR 52.204-21 and 52.240-93 for safeguarding covered defense information. Subcontracting plans are required under FAR 52.244-6, and accelerated payments to small business subcontractors are mandated. Invoicing must be submitted via Wide Area WorkFlow (WAWF), and all shipments must be properly labeled and documented in compliance with federal hazardous materials regulations and DLA logistics directives. The contracting office is located at DLA Troop Support in Philadelphia, PA, with Tiffany Parker listed as the primary point of contact. All responses must be submitted electronically via the DIBBS portal by the solicitation close date, and no physical submissions are permitted.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
ADAPTER, AIRWAY, CO2The contract is for the procurement of 35 packages of a single-use, disposable CO2 airway adapter suitable for both pediatric and adult use, with each package containing ten units. The item is identified by NSN 6515-01-598-4522 and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Bidders are required to clearly state the source and part number of the product being offered and adhere to DLA packaging standards. The contract is part of a federal procurement under solicitation SPE2DS-26-T-274V, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days after order. The place of performance is listed as APO, 09227-0000, and all supplies must be free of government identification if not accepted. The solicitation is classified under NAICS code 334511 for medical equipment manufacturing.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FUNNEL, COMMON, LABORATOThe contract is for the procurement of two plastic laboratory funnels, each 58mm in size, specifically designated for use with Taylor phosphate and nitrate test kits. The item is identified by NSN 6640-00-165-5851 and is to be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation, numbered SPE2DS-26-T-275U, was posted on July 27, 2026, with responses due by August 3, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense's Medical Supply Chain MD Surg FSF office. Delivery is to a military postal address with zip 96662, and primary point of contact is Olusola Emmanuel, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details