Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CASTER, SWIVEL

Active
SPE7L0-26-Q-0281Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two caster, swivel units identified by NSN 5340-01-276-5778, with a delivery requirement of 60 days after award. All technical and quality specifications governing the item are derived from the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the governing revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The contract mandates compliance with MIL-STD-130N for the identification marking of U.S. military property and includes specific protocol for the removal of government identification from non-accepted supplies. The solicitation, numbered SPE7L0-26-Q-0281, was posted on July 27, 2026, with responses due by July 31, 2026, and is managed by the Department of Defense’s Land Supply Chain ESOC Buys organization. Primary point of contact is Jeffrey Bloom, reachable via email and phone, and the procurement is conducted through the DIBBS platform.

General Info

Procure two swivel casters, NSN 5340-01-276-5778, deliver in 60 days, comply with MIL-STD-130N, DLA specs, DIBBS solicitation SPE7L0-26-Q-0281.

Agency

Department Of Defense → LAND SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L0-26-Q-0281.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Jeffrey Bloom
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASTER, SWIVEL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5340-01-276-5778 Quantity: 2 EA Purchase Request: 7014612779QTY: 2 Delivery: 60 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of one blind rivet, identified by NSN 5320-00-451-9167, under solicitation SPE4A6-26-T-10AH, issued by the ASC Commodities Division of the Department of Defense. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with hardware manufactured after the solicitation date required to adhere to the current revision of the governing standard. Past production to prior revisions remains acceptable. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The delivery timeline is 224 days after order, with performance designated at Hill AFB, Utah, and responses due by August 5, 2026. The solicitation is fully competitive under federal specification and is open to all eligible suppliers through the DIBBS procurement portal.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, EXTENSIONThe contract involves the procurement of a HANDLE, EXTENSION with part number B300-264-19/2 and NSN 5340-01-352-9560, for a quantity of six units, to be delivered within ten days to a military installation in Illgesheim, Germany. All items must be shipped FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging and marking must comply with commercial standards as specified for medical acquisitions, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1, which dictates unique labeling requirements to ensure traceability and compliance. Each unit must be sealed in protective packaging and enclosed in durable commercial shipping containers suitable for carrier transport at the lowest cost. Wood packaging materials are required to be heat-treated or kiln-dried in accordance with DoD regulations, and all shipments must adhere to DLA’s packaging guidelines as referenced on their official site. The contract is issued under solicitation SPE7L1-26-T-882X, with a response deadline of August 10, 2026, and a required delivery date of July 24, 2026. The primary point of contact for the acquisition is Kristina Derry, and the unit of issue is each, priced at $6.00 per unit. The end recipient is the Air DSSA AWCF SSF at Storck Barracks, Building 6503, with additional shipment instructions governed by DLA procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR CThe contract is for the procurement of five units of BRACKET, VEHICULAR C with NSN 2590-01-583-1193 and part number 3801940 from OSHKOSH DEFENSE LLC, under solicitation SPE7L0-26-T-0386. Delivery is required within five days FOB origin at a unit price of $5.00, totaling $25.00, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and RP001 packaging standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must be marked and labeled in compliance with DLA requirements, with palletization following RP001 guidelines. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1, Building 552, Texarkana, TX. The required delivery date is July 29, 2026, and the item is to be inspected and accepted at the destination. Government-use identifiers and tracking codes such as W45G18, TCN W45G18620500XF, RDD 244, and PROJ TP 1 are encoded for logistics and accountability purposes.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, BLOCK, SECTIONThis contract pertains to the procurement of two units of CLAMP, BLOCK, SECTION with NSN 5340-01-356-7179, under solicitation SPE7L1-26-T-884D, with a response deadline of August 10, 2026, and a delivery requirement within five days after delivery order issuance. Full and open competition applies, and the work falls under NAICS code 332510 with the Department of Defense’s Land Supply Chain as the contracting agency. Compliance with cybersecurity requirements mandates that the vendor be a CMMC Level 2 certified Third-Party Assessment Organization, ensuring adherence to specified security controls. The contract incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging, handling, and disposal of supplies must align with DLA directives, and government identification markings must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any transfer to foreign persons or entities, whether inside or outside the U.S., and DFARS 252.225-7048 governs its handling. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval prior to accessing controlled technical data. The point of contact for inquiries is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREADThe contract is for one machine thread plug with NSN 5365-01-180-6745, identified by purchase request 7017607599, under solicitation SPE4A0-26-T-4073, with a required delivery in five days by July 23, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. The product must comply with DLA packaging standards per RP001, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and specific packaging codes indicating preservation method 33, dry storage, and use of unit packaging with no intermediate containers. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and unspecifed attributes are treated as major. The item must be marked per MIL-STD-129 with no special markings, palletized according to DLA guidelines, and shipped FOB origin with no quantity variance allowed. Delivery is to Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLA procedural notes C19 and C20. The point of contact is Danita Davis, and the unit of issue is each, with government use codes indicating procurement and distribution routing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract specifies the procurement of one unit of a cover and access item identified by NSN 5340-12-359-4324 and part number 868201001 under solicitation SPE7L1-26-T-884H. The delivery must occur within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and the item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override general industry standards like ASTM D3951. If the item is hazardous per Fed-Std-313, it must meet TQ requirement IP025; if non-hazardous, it must be commercially packaged under ASTM D3951 while still adhering to DLA’s higher-priority specifications. All packaging must be labeled per MIL-STD-129, and palletization must follow RP001 guidelines. The item must be shipped traceably via freight to Fort Hood, Texas, using the specified destination address and must not be sent via parcel post. The required delivery date is July 27, 2026, and the contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with Michael Nordahl listed as the primary point of contact. Government-use codes and shipment identifiers are included for internal tracking and logistics.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVETThe contract is for 328 units of a threaded pin-rivet collar, identified by NSN 5320-00-631-3429, under solicitation SPE4A6-26-T-10AF issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is due 256 days after contract award, with responses due by August 5, 2026. The item falls under NAICS code 332510 and is procured for performance at New Cumberland, Pennsylvania. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including employees and subsidiaries, with access limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and obtained approval. CMMC Level 2 certification is mandatory for third-party assessors, and DLA packaging standards apply. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs marking. Bare item marking and physical identification requirements are enforced. The sole point of contact is Susan Barlow, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROL
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333613
New
DIBBS
HEAD, LINEAR ACTUATINGThe contract specifies the procurement of eight units of a head linear actuating cylinder with NSN 3040-01-214-3924 and part number 6-701-000210, under solicitation SPE7L0-26-T-0385. Delivery is required within five days of award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. All items must be packaged in compliance with ASTM D3951 and marked in accordance with MIL-STD-129, with packaging requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence. Palletization must follow DLA packaging standards, and shipment must be sent by the fastest traceable means, excluding parcel post. The delivery address is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, and the required delivery date is July 29, 2026. The unit price is $8.00 per item, resulting in a total contract value of $64.00. The item is classified under NAICS code 333613 and is being procured by the Department of Defense through the Land Supply Chain ESOC Buys office, with Jeffrey Bloom listed as the primary point of contact. Government-specific identifiers including the shipping control number W45G18, project code TP 1, and distribution codes are included for internal tracking and logistics purposes.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
CYLINDER HEAD, DIESEThis contract pertains to the procurement of one cylinder head, diesel engine part with NSN 2815-01-591-4237 and part number A040P960 from CUMMINS POWER GENERATION INC., under solicitation SPE7L0-26-T-0389. The item is to be delivered in one unit within five days of contract award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, which is Letterkenny Army Depot in Chambersburg, Pennsylvania. Packaging must comply with ASTM D3951 and be marked and labeled according to MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, and all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The unit of issue is EA, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery is scheduled for March 27, 2026, with the contract requiring adherence to all DLA-specific technical, quality, and logistical mandates, including marking with the designated military freight identifier and government-only codes. All requirements referenced through R or I numbers are incorporated by reference from the DLA Master List and govern performance regardless of any other clause in the document.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333515
New
DIBBS
BRACKET, VEHICULAR COMP
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BODY, CARGO TRUCK
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract specifies the procurement of a single helical compression spring with NSN 5360-01-468-9912 under solicitation SPE7L0-26-Q-0282, issued by the Department of Defense through the Land Supply Chain ESOC Buys office. The item must comply with technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances unless otherwise mandated, and assigned verification levels based on criticality. The spring must be manufactured without intentional addition or direct contact with mercury or mercury compounds, except for approved functional uses such as in batteries, fluorescent lamps, or specified instruments, with additional containment requirements for portable devices. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with marking per MIL-STD-129 and no special marking codes. The item is subject to a firm fixed price with zero quantity variance and must meet cybersecurity compliance through a CMMC Level 2 self-assessment. Acceptance occurs at destination, with FOB origin, and delivery is due within 60 days of award. The contract also requires compliance with covered defense information protocols and uses the DoD-authorized unit of issue. The delivered item will be shipped to USS GEORGE WASHINGTON CVN 73 at the designated FPO address, with transportation governed by DLA procedural notes, and the contract is open for full and open competition.
Spring Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 337122
New
DIBBS
CUSHION, SEAT BACK, VThe contract specifies the procurement of one CUSHION, SEAT BACK, V with NSN 2540-01-664-7622, under solicitation SPE7L0-26-Q-0283, with a required delivery within 60 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Key referenced requirements include packaging standards, removal of government identification from non-accepted supplies, tailored quality controls for manufacturers and non-manufacturers, configuration change management via engineering change proposals, inspection and acceptance at origin, and controls on export of technical data. The item involves technical data subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals within the U.S. and foreign subsidiaries. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and approved access may handle the data. The contract is issued by the Department of Defense through the Land Supply Chain ESOCL Buys, with Jeffrey Bloom as the primary point of contact, and responses are due by August 3, 2026.
Nonupholstered Wood Household Furniture Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 483111
New
DIBBS
Logistics & Transportation (U.S.-Flag Vessel Compliance)The contract pertains to the logistics and transportation of finished fasteners under strict compliance with the Jones Act, mandating that all oceanic shipments must be carried on U.S.-flagged vessels. This requirement ensures adherence to federal laws governing maritime commerce and national security interests, restricting transport to vessels owned by U.S. citizens, crewed by American personnel, and built in U.S. shipyards. The shipment originates from or is destined to Anniston, Alabama, with the specified ZIP code 36201-5021 as the place of performance, indicating the final delivery or pickup point for the fasteners. The contract is categorized as a subcontract under NAICS code 483111, which corresponds to coastal and Great Lakes water transportation. It is issued by the Department of Defense under the LAND SUPPLY CHAIN ESOC BUYS procurement office, reflecting its alignment with military supply chain needs. The solicitation was posted on July 26, 2026, and responses must be submitted no later than August 6, 2026, establishing a tightly governed bidding window for qualified providers capable of meeting U.S.-flag vessel logistics requirements.
Deep Sea Freight Transportation

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract pertains to the preparation and submission of Safety Data Sheets for hazardous materials utilized in production activities, ensuring full compliance with Federal Standard No. 313. This subcontract is issued under NAICS code 541690 and is managed by the Department of Defense through the LAND SUPPLY CHAIN ESOC BUYS office, with performance required at a designated location in Anniston, Alabama, ZIP 36201-5021. Proposals must be submitted by August 6, 2026, and the work involves accurate documentation of chemical hazards, handling procedures, and safety measures in alignment with federal regulatory requirements. The contract is open for bidding without specific set-aside designations and is accessible through the DIBBS procurement portal for interested vendors.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging & Marking ServicesThis contract requires the packaging and labeling of fasteners in strict compliance with DLA RP001, MIL-STD-129, and MIL-STD-2073-1E standards, ensuring all items are properly marked with Unique Item Identifiers (UID) and palletized for military logistics. The work must meet federal specifications for durability, readability, and traceability to support Department of Defense supply chain operations. The contract is structured as a subcontract with a NAICS code of 561910, indicating it involves support activities for material handling and logistics services, and the place of performance is designated as Anniston, Alabama, with a zip code of 36201-5021. Proposals are due by August 6, 2026, following a posting date of July 26, 2026, and the solicitation is issued under the Land Supply Chain ESOC Buys office within the Department of Defense.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Quality Testing & Inspection ServicesThe contract seeks third-party providers to perform mechanical and chemical testing services to ensure compliance with MIL-STD-1916 and other Department of Defense quality standards, focusing on verification of product conformance. The work is classified as a subcontract under NAICS code 541380 and is intended to support defense supply chain integrity through rigorous inspection protocols. Performance is required at the designated location in Anniston, Alabama, with the zip code 36201-5021, and all testing must align with established DoD specifications to guarantee reliability and uniformity in defense-related materials. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, providing potential bidders a limited window to submit proposals. The contract is administered by the LAND SUPPLY CHAIN ESOC BUYS under the Department of Defense, with no set-aside type designated, meaning it is open to all qualified entities regardless of business size or ownership. Interested parties must access the official solicitation through the DIBBS portal at the provided link to obtain detailed requirements, submission instructions, and any additional technical or administrative conditions necessary for participation.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331110
New
DIBBS
Materials & Raw Stock SupplyThe contract calls for the supply of high-strength alloy steel bar stock or wire specifically engineered to meet military specification chemical and mechanical properties for use in fastener manufacturing. The material must adhere to stringent standards to ensure performance under demanding conditions, with compliance to MIL-specifications being non-negotiable for acceptance. The procurement is structured as a subcontract under the Department of Defense’s Land Supply Chain ESOC Buys organization, with performance required at Anniston, Alabama, 36201-5021. The North American Industry Classification System code 331110 indicates the focus is on iron and steel mill and ferroalloy manufacturing, aligning the supplier’s capabilities with primary metal production. The solicitation was posted on July 26, 2026, and responses must be submitted by August 6, 2026, providing a limited window for qualified vendors to respond. All proposed materials must be traceable, certified, and documented to validate compliance with the required specifications.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details