Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Casting and Forging of Washers or Blanks

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332114
DIBBS
Metal Stamping or Fabricated Component SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the supply of precision-stamped or machined metal components. The scope of work specifically covers the production of retainers, brackets, and housings utilized in door seal assemblies, with a strict requirement that all parts conform to provided engineering drawings and established military standards. Classified under NAICS code 332114, the agreement focuses on specialized metal fabrication to support defense logistics. The contract was posted on August 7, 2026, and ensures that the fabricated components meet the rigorous quality and technical specifications necessary for military application.
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
NAICS: 332114
DIBBS
Precision Machined Component ManufacturingThe contract involves the precision manufacturing of a custom military-grade access cover requiring advanced metal fabrication techniques, specialized sealing features, and strict adherence to defense industry standards. The component must meet rigorous performance, durability, and environmental tolerances typical of military applications, ensuring reliability under extreme operational conditions. All work must comply with applicable defense specifications and quality control protocols to guarantee mission-critical functionality. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 332114 indicating it falls under forgings and stampings manufacturing. The solicitation was posted on July 16, 2026, and the place of performance and point of contact details are not specified, indicating that the contractor will be responsible for determining and executing production at an approved facility. The contract reference number is SPE7L126V8402 and is accessible via the DIBBS system for award tracking and compliance purposes.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense through the ASC Commodities Division, requires the provision of cast or forged blanks for recessed washers. The scope of work involves sourcing the necessary alloys and producing near-net shapes that are ready for final machining, specifically to support requirements when the prime contractor lacks in-house production capabilities. The project is categorized under NAICS code 332114 and will be performed at Tinker AFB. Interested parties must adhere to the response deadline of August 31, 2026, to be considered for this requirement.

General Info

DoD subcontract for cast or forged recessed washer blanks at Tinker AFB.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332114 - Custom Roll Forming

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-19FA.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, RECESSED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide cast or forged blanks for recessed washers if prime lacks in-house capability, including sourcing alloys and producing near-net shapes ready for machining.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
Supply of Hi-Shear Pin-Rivets (NSN 5320016936294)This subcontract through the Department of Defense ASC Commodities Division involves the supply of 34 specialized aerospace-grade pin-rivets to Tinker AFB in Oklahoma. The required components must match Hi-Shear Corporation part number HL646LL8-19 and NSN 5320016936294 to support prime contractors on DLA Distribution Depot Oklahoma projects. The contractor is responsible for ensuring all items are packaged according to ASTM D3951 and RP001 standards and marked in compliance with MIL-STD-129. Additionally, the provider must adhere to the Buy American Act and maintain cybersecurity standards consistent with NIST SP 800-171 and CMMC Level 2.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 331210
New
DIBBS
Supply of Aerospace-Grade Fastener StockThis subcontract, managed by the Department of Defense ASC Commodities Division, involves the supply of aerospace-grade raw metal stock for prime contractors working on DLA Aviation ASC projects. The scope of work requires the sourcing and certification of raw wire or bar stock that adheres to specific metallurgical requirements for NSN 5305-01-332-7123. To ensure full material traceability, the provider must supply Mill Test Reports and deliver the certified raw material stock directly to the manufacturer. The contract is categorized under NAICS code 331210 and mandates strict compliance with the Buy American Act, requiring materials to originate from domestic or qualifying countries. Performance for this contract is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the timeline established by the posting date of October 9, 2026, with a response deadline set for October 15, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Machine Screws (NSN 5305-01-332-7123)This subcontract involves the manufacture of 14 precision machine screws under NSN 5305-01-332-7123 for the Department of Defense ASC Commodities Division. The selected provider will utilize precision CNC or cold-heading equipment to perform machining and forming according to the provided technical data package. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. Strict quality and regulatory standards are required for this project, including ISO 9001:2015 inspection, MIL-STD-130N marking, and ASTM D3951/MIL-STD-129 packaging. Additionally, the contractor must maintain CMMC Level 2 and DFARS 252.204-7012 certifications and ensure full compliance with the Buy American Act.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-29MR
Solicitation SPE4A6-26-T-29MR is a fixed-price federal procurement issued by the Defense Logistics Agency (DLA) Aviation, ASC Commodities Division, for the acquisition of 16 socket head cap screws under NSN 5305-01-661-9915. The contract requires delivery within five days after receipt of order (ADO) to the Portsmouth Naval Shipyard in Kittery, Maine, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for physical identification. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program (JCP) certification and specific DLA authorizations. Compliance with the Buy American Act and Berry Amendment is required, and offerors must maintain active registration in the System for Award Management (SAM). Quality assurance will be conducted using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-24FW
Solicitation SPE4A6-26-T-24FW is a small business set-aside request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of two Grade 8 steel hexagon head cap screws. The required hardware must meet specifications 0.750-10 UNC-2A X 4.500 inches nominal with a nominal thread length of 1.750 inches, adhering to basic specification MIL-DTL-1222J Revision J and part piece number M1222RN12C272GHNN. Delivery is required within 82 days after receipt of order, with FOB and inspection/acceptance points designated as origin. The items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking per MIL-STD-129, with DLA Master List requirements taking precedence. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Offerors must comply with the Buy American Act and the Berry Amendment, and submit quotes via DIBBS. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 regarding cybersecurity and safeguarding covered defense information.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-25NV
Solicitation SPE4A6-26-T-25NV, issued by the Department of Defense ASC Commodities Division, is a request for quotations for one screw thread insert, identified by NSN 5325-00-598-5607. The procurement is categorized under NAICS code 332510 and requires delivery to Fort Drum, New York, within 10 days after the order is received. Quotes must be submitted via DIBBS by September 9, 2026. The contract incorporates specific technical and quality standards via the DLA Master List, including RP001 for packaging requirements, RQ017 for physical identification and bare item marking, and RQ011 regarding the removal of government identification from non-accepted supplies. Terms include FOB destination and destination inspection, with adherence to domestic material restrictions and telecommunications representations as outlined in the DLA Master Solicitation for Automated Simplified Acquisitions.
Hardware Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-27-T-0012
Solicitation SPE4A6-27-T-0012, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for one set screw, NSN 5305016811891, part number MS51023-158. The requirement specifies a delivery timeframe of five days after order, with an original required delivery date of September 25, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in Texarkana, Texas. The contractor must utilize the fastest traceable shipping means and is prohibited from using Parcel Post. Technical compliance requires adherence to NASM51023 Revision 2 and specific DLA quality requirements, including physical identification and bare item marking per RQ017. Packaging must follow MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Quality assurance involves a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331. The solicitation incorporates various FAR and DFARS clauses, including cybersecurity requirements under DFARS 252.204-7012 and a price evaluation preference for certified HUBZone Small Business Concerns. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 331315
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-46Q4
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,799 screw thread inserts under NSN 5325-01-458-5463. The contract requires delivery within 121 days after receipt of order and is categorized under NAICS code 331315. Performance is designated for New Cumberland, Pennsylvania, with the solicitation period running from October 9, 2026, to October 15, 2026. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific mandates for packaging, physical item marking, and inspection and acceptance at origin. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Consequently, contractors must possess an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the necessary technical data.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE, FLEXIBLE
Solicitation # SPE4A6-26-T-35AW
Solicitation SPE4A6-26-T-35AW, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 4,000 units of flexible cable, identified by NSN 5995011952776 and part number F172-PP-0265-A6 from Flexco Microwave Inc. The contract specifies a delivery period of 171 days, with a need ship date of March 21, 2027, and a required delivery date of July 26, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The procurement is subject to rigorous quality and security standards, including CMMC Level 2 Self-Assessment, Covered Defense Information requirements, and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, and the use of mercury or additive manufacturing processes is prohibited unless specifically authorized. Compliance with the Buy American Act, the Berry Amendment, and the Hazard Communication Standard for any hazardous materials is mandatory. Payment will be processed electronically through the Wide Area WorkFlow system.
Other Electronic Component Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 334413
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-37ZF
Solicitation SPE4A6-26-T-37ZF, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 19 indicator lights, identified by NSN 6210-00-581-9464. The procurement specifies critical application items with associated part numbers from Lockheed Martin Corp (695712-12) and Korry Electronics Co (ST136ML5-12). Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 13, 2026, and an original required delivery date of August 24, 2026. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via the DIBBS portal and comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
Semiconductor and Related Device Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-35ZW
Solicitation SPE4A6-26-T-35ZW is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of four sleeve bearings, identified by NSN 3120-01-499-6051. The requirement is for critical application items associated with Electric Boat Corporation part number H547-1112-118 and Kamatics Corporation part number KRJ26-UDSV-036. Delivery is required within 163 days, with a need ship date of March 14, 2027, and the items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 for manufacturers and specific preservation, packaging, and marking requirements per MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. Inspection and acceptance will occur at the point of origin. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Additionally, the use of mercury or mercury-containing compounds is prohibited in the preservation and packaging process. All quotes must be submitted via the DIBBS system, and payment will be processed electronically through the Wide Area Workflow system.
Ball and Roller Bearing Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-37MX
Solicitation SPE4A6-26-T-37MX is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of three set screws, identified by NSN 5305-01-531-7710. The contract requires delivery within 20 days after award, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination in Silverdale, Washington. Quotations must be submitted by October 6, 2026, and must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Technical requirements mandate strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Packaging must follow MIL-STD-2073-1E and ASTM D3951, with palletization governed by DLA requirement RP001. Quality assurance is managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and the intentional use of mercury or mercury-containing compounds is prohibited. Additionally, the contractor must utilize the Wide Area WorkFlow system for invoicing and meet cybersecurity standards, including CMMC Level 2 Self-Assessment and NIST SP 800-171 requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS