This Solicitation opportunity from Oklahoma was posted on February 28, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Center Console Boat, Surface Drive Motor & Trailer

Closed

EV00000666State & Local

Submission Closed04/16/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331315

New

DIBBS

Aerospace Grade Material and Component SupplyThis subcontract opportunity, issued by the Department of Defense DLA Weapons Support ASC Supplier OEM Division, seeks a provider for aerospace-grade metals and hardware to support aircraft ramp projects. The selected supplier must provide raw materials and sub-components that strictly adhere to Goodrich P/N 470U100-2 specifications. To ensure quality and safety, all deliveries must include full traceability documentation, specifically Mill test reports and Certificates of Conformance, and the provider must maintain an AS9100 or ISO 9001 quality management system. The contract is designated as a Total Small Business Set-Aside under NAICS code 331315, with the place of performance located in New Cumberland. Interested parties must respond by October 30, 2026. This procurement focuses on the delivery of certified raw materials essential for prime contractors operating within the DLA Weapons Support framework.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Brass Material SupplyThe Aerospace Brass Material Supply subcontract is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contract focuses on the procurement of certified raw brass materials to support prime contractors. Required materials must strictly adhere to ASTM B121/B121M for leaded brass and ASTM B36/B36M for general brass specifications. Suppliers are responsible for delivering raw brass stock accompanied by comprehensive material certifications and Mill Test Reports. This opportunity falls under NAICS code 331315 and was posted on October 22, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Blue Gard 3200 Fiber Gasket SheetsThis subcontract involves the procurement of 49 asbestos-free fiber gasket sheets for prime contractors supporting DLA supply contracts. The specific requirement is for Garlock Inc Mechanical Packing Div 5L967 part number Blue Gard 3200 sheets, measuring 1/16 x 60 x 60 inches. All items must be packaged in waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1 standards, while maintaining compliance with FED-STD-313 and Buy American regulations. The contract is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Delivery is designated as FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The solicitation is categorized under NAICS code 331315.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Custom Aluminum BlanksThis subcontract, issued by the Department of Justice for Federal Prison Industries, involves the manufacture and supply of precision-cut aluminum blanks for prime contractors. The scope of work requires the production of aluminum sheets in three specific dimensions with a thickness of .040 inches, featuring caution yellow masking and various corner radii options. All materials must be packaged according to ASTM D-3951-95 standards and delivered to designated locations. The opportunity is designated as a total Small Business Set Aside under NAICS code 331315, with the place of performance located in Cumberland, Maryland. Interested parties must respond by November 20, 2026, to be considered for the provision of these custom components.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Solicitation # SV0102-27

UNICOR Federal Prison Industries, Inc., under the Department of Justice, is soliciting a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of commercial aluminum blanks. This requirement is 100% set aside for small businesses under NAICS code 331315, with a size standard of 1,400 employees. The contract consists of three line items: 50,000 units of 10in x 7in .040-thickness blanks, 20,000 units of .032in x 4-1/2in x 5in yellow blanks, and 1,000 units of .032in x 2-1/2in x 15in aluminum rectangles. There is a guaranteed contract minimum of 40,000 units, with delivery orders ranging from a minimum of 4,000 feet or 10,520 dollars to a maximum of 10,000 feet or 26,300 dollars. Delivery is FOB Destination to the UNICOR facility in Cumberland, Maryland. Proposals are due by November 13, 2026, at 2 PM EST and must be submitted via email to the Contract Specialist. Evaluation will be based on technical specifications, price, past performance, and delivery time, with technical specifications and past performance weighted as more important than price. Offerors must be registered in the System for Award Management (SAM) and provide detailed line-item pricing, lead times, and three business management questionnaires for past performance. The contract includes a most favored customer clause requiring the contractor to report any price reductions offered to their best commercial customers. Packaging must comply with ASTM D-3951-95 standards, and invoices should be submitted electronically to the designated accounts payable email.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Specialized Embossing-Grade Aluminum Sheet SupplierThis subcontract agreement establishes the supply of new, unused aluminum sheeting for prime contractors working on projects for the State of Louisiana Office of State Procurement. The required material must be .027 inches by 12-1/8 inches in alloy tempers 8112-H111, 7069-H111, or 3105-H21, featuring either chrome-free or chromate conversion coatings. A critical quality standard requires the sheeting to withstand embossing with all-steel dies at a height of 3/32 inches without breaking. The selected supplier is responsible for delivering certified aluminum sheeting across two separate shipments. This procurement opportunity falls under NAICS code 331315 and is managed by the Louisiana Procurement agency, with a response deadline set for November 17, 2026.

POSTED

DEADLINE

Solicitation # 3000026832

Solicitation 3000026832 is an invitation to bid issued by the State of Louisiana Office of State Procurement for the procurement of aluminum materials for the DOC Prison Enterprises LSP Tag Plant in Angola, Louisiana. The state seeks the lowest responsive and responsible bidder to provide new, unused aluminum with a thickness of .027 inches and a width of 12-1/8 inches. Technical requirements specify an alloy temper of 8112-H111, 7069-H111, or 3105-H21, with an ultimate strength between 17,000 and 23,000 KSI. The material must be capable of withstanding embossing with all-steel dies at 3/32 inch height without breaking, cutting, or warping. The contract will be awarded based on the lowest price, though the state reserves the right to prioritize vendors offering the earliest delivery and may reject any bidder unable to deliver within 21 days of the award. All bids must be submitted F.O.B. Destination and are due by November 17, 2026. Payment terms are set at 30 days following the receipt of delivery or a properly executed invoice. Compliance requirements include adherence to the Clean Water Act, the Energy Policy and Conservation Act, and various non-discrimination and accessibility standards, including WCAG 2.1 Level AA and Section 508 of the Rehabilitation Act. Bids for $25,000 or more require certification that the bidder is not suspended or debarred by the General Services Administration.

POSTED

DEADLINE

RFP - W7714-279040 - Aluminium 48 inches x 184 inches x 1 inch thick plates[DDP - W7714-279040 - Plaques d'aluminium 48 pouces x 184 pouces x 1 pouce d'épais]

Solicitation # Doc5935734573

Public Works and Government Services Canada, acting on behalf of the Department of National Defence, is requesting proposals for the acquisition and delivery of 16 aluminium plates measuring 48 inches by 184 inches with a thickness of 1 inch. This procurement is subject to the Canadian Free Trade Agreement and includes mandatory requirements for environmentally preferable packaging in alignment with the Greening Government Strategy. Interested bidders must be registered in the SAP Ariba network to access solicitation documents and submit offers. All technical inquiries must be submitted via the Event Messages tab in SAP Ariba at least five calendar days before the closing date. The Crown reserves the right to negotiate terms with suppliers, and bidders may request a debriefing following the results of the process.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

RFP - W7714-279040 - Aluminium 48 inches x 184 inches x 1 inch thick plates

Solicitation # WS5935535083

Public Works and Government Services Canada, acting on behalf of the Department of National Defence, is seeking proposals for the acquisition and delivery of aluminium plates. The specific requirements call for plates measuring 48 inches by 184 inches with a thickness of 1 inch, to be delivered to Quebec, Canada. This solicitation, identified by number WS5935535083, was posted on October 21, 2026, with a response deadline of November 13, 2026. Interested parties should coordinate with the primary contracting authority, Sonia Langis, regarding the submission of their proposals.

Department of Public Works and Government Services

POSTED

DEADLINE

Supply of Structural Aircraft Aluminum Plate StockThis subcontract involves the supply of raw structural aircraft aluminum plate stock to prime contractors supporting Department of Defense contracts through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The material must strictly adhere to the specifications outlined in Drawing 13873 and comply with the legal requirements of the Buy American Act and the Berry Amendment. To ensure quality and regulatory compliance, the provider must deliver certified stock accompanied by Mill Test Reports verifying the correct alloy and temper. The performance of this contract is centered at Tinker AFB in Oklahoma. Interested parties should note that the solicitation was posted on October 20, 2026, with a response deadline of October 28, 2026. The procurement falls under NAICS code 331315, focusing on the delivery of certified raw materials essential for structural aircraft components.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0114

Solicitation SPE8E4-27-T-0114 is for the procurement of 15 feet of round metal bar, specifically Steel Comp 630, Condition H1025, with a diameter of 5.500 inches and a length of 12.00 feet. The requirement is designated as a critical application item and must comply with several technical standards, including SAE AMS5643W, ASTM A700-14, and SAE AMS2806. Delivery is required within 149 days, with an original required delivery date of January 5, 2027, and a need ship date of March 28, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and adhere to rigorous marking and packaging standards, including MIL-STD-129 and MIL-STD-2073-1E. Continuous identification markings are required on each unit of issue, and specific preservation and packing codes Z and ZZ per ASTM A700 must be followed. Inspection and acceptance will occur at the destination. Payment processing is to be handled electronically via the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Supplier of Aluminum Alloy 7075-T6 Metal BarThis subcontract, managed by the Department of Defense through DLA Dist San Joaquin, seeks a supplier for high-strength aluminum alloy 7075-T6 metal bars. The required material must be 1.000 inch thick and 6.000 inches wide, provided in lengths between 10 and 12 feet. The final delivery consists of 19 feet of finished aluminum bar, which must be accompanied by a Certificate of Quality Compliance. The supplier must adhere to strict industry standards, including SAE AMS-QQ-A-225/9A, SAE AMS-QQ-A-225C, ASTM B660, and ASTM B666/B666M-20. Additionally, the contractor is required to maintain a QSLD listing and ensure full compliance with the Buy American Act. Performance for this contract will take place in Tracy, California.

DLA DIST SAN JOAQUIN

POSTED

8 days ago

DEADLINE

in 3 days

General Info

Agency

Oklahoma → Wildlife Conservation

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

Agency Bid Instructions - EV00000666

itb

High

Attachment A Solicitation No. EV00000666

rfp

High

Pricing Sheet for Center Console Boat, Surface Outboard Motor and Boat Trailer

bid-schedule

High

Specifications for Center Console Boat, Motor, and Trailer

specifications

High

Attachment C - Agency Terms

contract-document

Low

Non-Collusion Form CP004

other

Low

State of Oklahoma General Terms

contract-document

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedFeb 28

Solicitation

Deadline changedFeb 28

Response deadline changed from Mar 27, 2025 to Apr 16, 2025.

Response DeadlineApr 16

Deadline has passed

Submission Closed

04/16/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOklahoma → Wildlife Conservation

Contacts1 person available

OfficeN/A

Organization / AgencyOklahoma → Wildlife Conservation

Office AddressN/A

Contacts

Audrey MimbsOklahoma Supplier Portal Contact

contact@example.gov

Full Description

Center Console Boat- 18’ Long, 60” Wide, 21” Sides, 77” beam, 20’ transom, constructed of marine grade 5086 aluminum hull. .125 aluminum plate hull construction, hull bottom and sides constructed (crimped) out of one (1) plate forming hull, no welded seam at chine, rake of hull to welded at chine. 100’ aluminum plate sub floor mounted to ribs with aluminum rivets, hydraulic steering, factory rigging. 14-gallon aluminum gas tank, 1 battery, 1 battery box, battery disconnect, driver’s seat, 500 gph bilge pump, Front mounted LED light bar, LED interior light bar, 2 t-rail rope cleats, spud kit, accessory plug, 2-USB Ports, brown paint, trolling motor bracket. Surface Drive Outboard Motor – EFI 40 HP – Full Power Reverse (180 degree rotation of lower unit assembly), 20’ long shank, instant forward and neutral, instant prop reverse, 1” hex propeller shaft to accommodate 2-blade propeller, Gen 5 lower unit 1.57to 1 gear reduction, 20 / 50 amp alternator, stainless-steel muffler, 993 cc, 61 cubic inches, 56lbs torque. High RPM rev limiter, 3-year warranty.
Boat, Trailer – 60” Bottom, all aluminum, LED lighting, adjustable PVC pipe guides, 14” wheels, spare tire and wheel, dolly wheel, 3500lb single axle, premium aluminum wheels (incl spare) radial tires, stainless steel boat buckle ratchet tie downs.
Shipping of boat, trailer and motor to 1801 N. Lincoln, Oklahoma City, OK. Not to exceed $2.00 per mile.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS