This Solicitation opportunity from Department Of Energy was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

centrifugal mixer

Closed

6-B141-Q-00426-00Federal

Submission Closed08/31/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248

New

Federal

NOTICE OF INTENT TO AWARD SOLE SOURCE – BEP SPARE PARTS

Solicitation # 2031ZA27N00005

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Solicitation # 26-58201

The National Research Council of Canada, through its Clean Energy Innovation Research Centre in Boucherville, Québec, has issued Request for Information 26-58201 to identify commercially available large slurry mixers. The objective is to scale up current laboratory capabilities by approximately ten times to support the preparation of viscous battery electrode slurries for lithium-ion and emerging battery chemistries. The NRC is seeking systems that offer high-performance planetary and dispersive mixing, vacuum-assisted degassing, temperature control, and automated process monitoring. The equipment must be compatible with specific solvents, including water, N-Methylpyrrolidone, Gamma-Valerolactone, Dimethylformamide, and Dimethyl Sulfoxide, and must be designed for safe operation by a single user without the need for manual lifting of mixing components. This RFI is intended for market research to inform future technical requirements and does not constitute a formal bid solicitation or a commitment to award a contract. The NRC has provided a budgetary estimate of 350,000 to 400,000 CAD for the equipment and delivery, with an additional 30,000 CAD estimated for installation. Interested respondents must submit their information electronically to Veronica Exari by the deadline of November 16, 2026. Submissions should include estimated delivery lead times and details regarding the vendor's ability to provide on-site support in Boucherville, Québec.

National Research Council of Canada

POSTED

DEADLINE

Supply of Hub and Pin Assemblies (NSN 6930-01-131-7216)This subcontract involves the manufacture or sourcing of 10 Hub and Pin Assemblies under NSN 6930-01-131-7216 for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider must ensure all assemblies meet strict technical specifications and DLA quality and inspection standards. Additionally, the contractor is responsible for packaging and labeling items in accordance with DFARS 252.223-7001 and coordinating delivery through the First Destination Transportation program. The opportunity is categorized under NAICS code 333248 and requires the contractor to have a CMMC Level 2 Self-Assessment. Interested parties must submit their responses by November 9, 2026, to support the Department of Defense requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hand-Operated Drum WinchesThis subcontract involves the procurement of 16 hand-operated drum winches to support prime contractors fulfilling Department of Defense supply contracts. The required equipment must strictly adhere to NSN 3950-01-595-4485 and part number DL1602A specifications. Additionally, the supplier is responsible for ensuring full compliance with the DLA Master List of Technical and Quality Requirements and providing all necessary EPA-approved Consumer Information Sheets. The final delivery of the 16 units is designated for DLA Distribution DDSP located in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 333248 and is managed through the Department of Defense. Interested parties must meet the specified technical standards to ensure the equipment is suitable for its intended military supply application.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Borosilicate Microscope Cover Glass SupplyThis subcontract involves the supply of borosilicate microscope slide cover glass to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The required glass must be optically clear, colorless, and non-fogging, measuring 22mm by 22mm with a thickness of number one in accordance with DLA RA001 requirements. The order consists of four packages, each containing ten 1oz containers, which must be packaged and labeled according to MIL-STD-2073-1E and Medical Marking Standard No. 1. Delivery is specified as FOB Destination to Fort Bragg, North Carolina. The procurement falls under NAICS code 333248.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

TEST KIT, LEAD DETERMIN

Solicitation # SPE2DH-27-T-0302

Solicitation SPE2DH-27-T-0302, issued by the DLA Troop Support Medical Supply Chain FSH, is for the procurement of one package of lead determination test kits (NSN 6640-01-455-9311). Each package must contain 100 ion-specific test strips capable of 100 determinations within a range of 20 to 500 PPM. The items must have a shelf life of 24 months, with a strict requirement that no more than three months have elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within 20 days after receipt of order (ADO) to Eglin AFB, Florida, under FOB Destination terms. The contractor must adhere to rigorous labeling and packaging standards, including Medical Marking Standard No. 1 and MIL-STD-2073-1E. Labels must clearly display the NSN, manufacturer, CAGE code, contract or lot number, and relevant manufacture or expiration dates. Because the items may be classified as hazardous materials, packaging must comply with 49 CFR, ICAO, and IMDG regulations, with certifications provided on the DD Form 250. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity requirements, and destination inspection per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CUVETTE, BLOOD SAMPLE

Solicitation # SPE2DH-27-T-0314

This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of two boxes of HB 201 microcuvettes (NSN 6640-01-671-4541) for use with the HemoCue HB 201 Plus Analyzer for hemoglobin point-of-care testing. Each box contains 200 units. The items must have a shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Storage requirements are strictly set between 15 to 30 degrees Celsius (59 to 86 degrees Fahrenheit). Delivery is required within 85 days after receipt of order, with the destination point located in Germany and the United States. The contract requires adherence to Medical Marking Standard No. 1, and labels must include the NSN, manufacturer CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. Packaging must be commercial and compliant with MIL-STD-2073-1E. Bidders must specify the source and part number being supplied, and any alternate offers require a complete data package for evaluation. The procurement is subject to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Invoicing and payment must be processed through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

WINCH, DRUM, HAND OPERAT

Solicitation # SPE8EE-27-T-0335

Solicitation SPE8EE-27-T-0335, issued by the DLA Troop Support Construction and Equipment Manufacturing and Contracting office, is for the procurement of 16 hand-operated drum winches (NSN 3950-01-595-4485). The contract specifies a delivery period of 167 days after order, with an original required delivery date of March 21, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Each shipment must include an EPA-approved Consumer Information Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. The assigned NAICS code for this effort is 333248.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0317

Solicitation SPE8EE-27-T-0317 is a request for quotations from the Defense Logistics Agency for the procurement of 122 units of Brake Stop hardware, identified by NSN 3950015491037. The requirement is governed by NAICS code 333248 and specifies a delivery lead time of 167 days after order, with an original required delivery date of February 2, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List requirements and RP001 for palletization. Special technical constraints include the prohibition of intentionally added mercury and the requirement to remove government identification from non-accepted supplies. Administratively, the contract utilizes the Wide Area WorkFlow system for electronic invoicing and incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and safeguarding of covered defense information. Quotations are due by November 9, 2026, and may be submitted via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0334

Solicitation SPE8EE-27-T-0334 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of six units of hook hoists under NSN 3950-01-609-4265. The requirement specifies that only new, unused, and non-refurbished material will be accepted. The delivery is required within 167 days after order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will take place. The contract incorporates strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must follow RP001 standards, specifically requiring the use of government or wing tip pallets, as non-government cannery pallets are prohibited. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This procurement is not a small business set-aside and requires compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the safeguarding of covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CAPTURE FRAME, BRACKET

Solicitation # SPE8EE-27-T-0326

Solicitation SPE8EE-27-T-0326 is a Request for Quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of six capture frame brackets under NSN 3950-01-573-7388. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery schedule of 167 days after order. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. The contract is governed by NAICS code 333248 and includes stringent technical and quality requirements as defined in the DLA Master List, with specific packaging and marking standards including ASTM D3951 and MIL-STD-129. Compliance with the Buy American Act and Berry Amendment is required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0208

Solicitation SPE8ES-27-T-0208 is a request for quotations from the Defense Logistics Agency for the procurement of one 5-gallon can of mold release agent, identified by NSN 8030-01-233-1265. The requirement specifies a non-extendable shelf life of 12 months and requires storage temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within five days after order, with a required delivery date of October 29, 2026, shipped FOB Destination to locations in Illinois and the US APO AE. The contractor must adhere to strict hazardous materials protocols, including the submission of Safety Data Sheets and labels compliant with 29 CFR 1910.1200 for review prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, Berry Amendment, and safeguarding requirements for covered defense information. Quotations must be submitted via the DIBBS portal by November 3, 2026.

Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days

AI Contract Overview

Argonne National Laboratory, a Department of Energy contractor based in Lemont, Illinois, is issuing solicitation 6-B141-Q-00426-00 for the procurement of a centrifugal mixer under NAICS code 333248. The contract will be awarded using the lowest price, technically acceptable methodology. All submissions must be received by August 31, 2026, at 12:00 PM CST. Prospective bidders must complete the solicitation package, specifically ensuring that points A through F on page 2 of the ANL-70 form are fully addressed, as incomplete submissions will be discarded. The procurement process requires the submission of the ANL-70A Representation and Certifications form to verify company information, SAM registration, and compliance with federal regulations. The agreement is governed by the ANL-71 Commercial Terms and Conditions, which incorporate specific Federal Acquisition Regulations and Department of Energy Acquisition Regulations. Primary contact for this solicitation is Elizabeth DeCarlo.

General Info

Argonne National Laboratory seeks a centrifugal mixer via lowest price technically acceptable bid.

Agency

Department Of Energy → Argonne National Labor - DOE Contractor

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

IL, 60439, USA

Set-Aside

NONE

Documents

8 pages · terms-and-conditions

High

rfq

High

6 pages · reps-and-certifications

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

Response DeadlineAug 31

Deadline has passed

PostedSep 1

Solicitation

Submission Closed

08/31/2026, 10:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Contacts1 person available

OfficeLemont, IL, 60439, USA

Organization / AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Office AddressLemont, IL, 60439, USA

Contacts

Elizabeth DeCarlo

contact@example.gov

+1 (555) 000-0000

Full Description

Argonne National Laboratory is seeking to source:

Please see attached solicitation package - on the ANL-70 form: Please remember to complete points A-F on page 2.

NO SOLICITATION WILL BE CONSIDERED WITHOUT ALL THESE COMPLETED. If any components are missing, your solicitation will be discarded.

*THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY*

All forms and signed solicitation have a requested completion date of 08/31/2026 at 12:00PM CST. If there are any questions please feel free to reach out to contact@example.gov.