This Government Contract opportunity from Department Of Defense was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Centrifugal Pump Impeller Fabrication

Closed

Federal

Submission Closed09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333911

New

SLED

75Hp Backwash Pump ProcurementThis subcontract focuses on the procurement and delivery of a 75Hp Backwash Pump and its associated appurtenances for the City of Adairsville water plant projects. The selected provider is responsible for manufacturing, sourcing, and delivering a pump that adheres strictly to the technical specifications outlined in the project drawings and contract documents. The procurement process is managed by the City of Adairsville in Georgia, with a response deadline set for November 3, 2026. The scope of work concludes with the physical delivery of the equipment to the water plant facility to support the prime contractors on the project.

POSTED

DEADLINE

Wastewater Decanter Centrifuge Equipment SupplierThis subcontract agreement establishes the requirements for a supplier to provide a wastewater decanter centrifuge for prime contractors working on City of Rosenberg Utilities Department projects. The selected supplier is responsible for manufacturing or sourcing a unit that meets all descriptive specifications and must provide detailed technical drawings, specification sheets, and comprehensive warranty information. The scope of work includes the delivery of the physical centrifuge unit along with all necessary technical documentation. This opportunity is categorized under NAICS code 333911 and was posted on September 21, 2026, with a response deadline of October 15, 2026.

POSTED

DEADLINE

Lift Station Equipment SupplierThis subcontract for the Water and Sewer agency in Florida involves the supply of mechanical pumping and flow measurement hardware for prime contractors working on OCWS lift station projects. The scope of work includes the delivery of 15 HP non-clog explosion-proof pumps, 316 Stainless Steel discharge piping, Henry Pratt Series 9001 swing check valves, and DeZurik AWWA C504 ballcentric plug valves. Additionally, the supplier must provide Endress Hauser or McCrometer flow meters and access covers rated for 300 lb/sq. ft. The contract was posted on September 21, 2026, with a response deadline of October 21, 2026, and falls under NAICS code 333911.

POSTED

DEADLINE

HVAC Equipment SupplierThis subcontract opportunity is for an HVAC Equipment Supplier to provide industrial fans, extraction units, and filtration systems for prime contractors working on Agriculture and Agri-Food Canada facility projects. The selected supplier will be responsible for manufacturing and delivering industrial-grade exhaust fans, source-capture hardware, and fume extraction units specifically for the Benton Ridge site in New Brunswick, ensuring all equipment adheres to the engineered specifications detailed in the project documentation. The solicitation was posted on September 21, 2026, with a response deadline of October 2, 2026. This procurement falls under NAICS code 333911 and is managed by the Government of Canada through the Department of Agriculture and Agri-Food.

Department of Agriculture and Agri-Food

POSTED

DEADLINE

Supply of Trailer-Mounted High Velocity Hydro Jetter (Series 225-500)This subcontract involves the supply of a new, production-model, self-contained high velocity hydro jetter for prime contractors working on State of Louisiana Office of State Procurement projects. The equipment must be trailer-mounted and conform to O'Brien 7040-SC specifications, delivered fully assembled and ready for immediate operation with all fuel and fluid levels filled. The system must adhere to all applicable State and Federal safety and emission standards. The procurement process for this equipment, categorized under NAICS code 333911, was posted on September 21, 2026, with a response deadline of October 21, 2026. The contract is managed by the Louisiana Procurement agency and focuses on delivering a fully operational Series 225-500 hydro jetting system.

POSTED

DEADLINE

Sump Pump and Motor Equipment SupplierThis subcontract agreement involves the supply of two new sump pumps and motors for prime contractors working on Upper Thames River Conservation Authority dam projects. The supplier is responsible for the fabrication and manufacture of the equipment, as well as the delivery of the units to the project site. To ensure compliance, the supplier must provide shop drawings and product data for engineering review and utilize Lamacoid labels with wording approved by the engineer. The contract includes a requirement for a one-year guarantee letter to ensure equipment performance. This procurement opportunity is managed by the Upper Thames River Conservation Authority, with a response deadline set for October 9, 2026.

Upper Thames River Conservation Authority

POSTED

DEADLINE

Prefabricated Irrigation Pumping System Fabrication & SupplyThis subcontract for the City of Charlottesville involves the fabrication and supply of a fully operational, automatic, prefabricated pumping system for irrigation projects. The scope of work includes constructing pump bases from sheet steel and structural supports, as well as installing ASTM A53 Grade B piping with forged steel flanges. To ensure quality and safety, all fabrication must be performed by AWS certified welders, and the final delivery must be a fully tested assembly. The project is managed by the Virginia Public Works Capital Development agency under NAICS code 333911. Interested parties must submit their responses by October 9, 2026, following the solicitation posted on September 18, 2026.

Public Works - Capital Development

POSTED

DEADLINE

Supply of Flowserve 350-LNN-725 Horizontal PumpsThis subcontract involves the supply of two genuine OEM replacement Flowserve 350-LNN-725 horizontal pumps for industrial equipment projects managed by prime contractors for the City of Saskatoon. The selected provider must hold current authorization as an OEM Flowserve representative and distributor to ensure the delivery of authentic hardware. The equipment must be delivered to the City of Saskatoon by May 20, 2027. This procurement opportunity was posted on September 18, 2026, with a response deadline of October 2, 2026.

POSTED

DEADLINE

Pump & Aeration Equipment SupplyThis subcontract for Pump and Aeration Equipment Supply supports prime contractors working on projects for Thames Water Utilities Limited. The scope involves the provision of high-efficiency pumps, aeration diffusers, blowers, and associated hardware delivered directly to operational sites. All equipment must meet specific efficiency requirements and adhere to established UK water utility standards. The agreement ensures quality and reliability through the provision of manufacturer warranties for all supplied components. This procurement effort is categorized under NAICS code 333911 and is managed by Thames Water Utilities Limited to maintain critical infrastructure and operational efficiency across their utility network.

Thames Water Utilities Limited

POSTED

DEADLINE

Deaerating Feed Tank (DFT) & Feedwater Treatment System ManufacturerThis subcontract through the Department of Homeland Security involves the design, manufacture, and delivery of one Deaerating Feed Tank and NSTM 220 V2 compliant feedwater treatment systems for the USCG USCGC HEALY SLEP projects. The manufacturer must utilize MIL-C-15726 Copper-Nickel Alloy and MIL-B-24480 Bronze/Nickel-Aluminum materials and maintain ANSI/ASQ 9001:2015 certification. The project is managed by the Sflc Procurement Branch 2 and requires delivery of the equipment to the installation site in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Fire Pump & Controller Equipment SupplierThis subcontract involves the procurement and delivery of specialized fire pumps and control hardware for Department of Justice Federal Bureau of Prisons facility projects, specifically for delivery to FCI Elkton. The supplier is responsible for providing UL-listed and FM-approved equipment that adheres to strict government specifications and Buy American statutes regarding iron and steel. Additionally, the contractor must provide all necessary technical data sheets and manufacturer warranties. The opportunity is designated as a total Small Business Set Aside under NAICS code 333911. The solicitation was posted on September 18, 2026, with a response deadline of October 21, 2026. Performance for this contract is centered in Lisbon.

POSTED

DEADLINE

Industrial Air Compressor SupplierThis subcontract for the Department of Defense involves the supply of one tow-behind air compressor to support prime contractors on FY26 JTF-SB HQ projects for agency W569QE. The required equipment must be a mobile unit that meets commercial product standards with specifications of 175 PSI and 300 CFM. The project is categorized under NAICS code 333911 and will be performed at Fort Bliss, Texas. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

0410 Aq Hq Contracting Supply

POSTED

4 days ago

DEADLINE

in 1 day

General Info

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333911 - Pump and Pumping Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-377X.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IMPELLER, PUMP, CENTRIFU

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedSep 1

subcontract

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures high-precision centrifugal pump impellers for prime contractors on DLA Land and Maritime fluid handling projects. Fabricates impellers from approved forgings and castings using CNC and milling equipment per government drawings and MIL-T-31000. Develops process sheets and inspection criteria. Requires Engineering Source Approval and CMMC Level 2. Delivers two completed centrifugal pump impellers.