Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Certificate of Quality Compliance and Inspection Support

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires suppliers to provide a Certificate of Quality Compliance with every shipment, ensuring all delivered goods meet specified quality standards and include complete traceability data to support accountability and regulatory compliance. For suppliers not enrolled in the Qualified Supplier List for Defense (QSLD), third-party inspections may be mandated to verify conformance, adding an additional layer of oversight to maintain defense supply chain integrity. The requirement emphasizes documentation rigor and transparency, with traceability data critical for audit readiness and risk mitigation across the logistics pipeline. The contract, titled Certificate of Quality Compliance and Inspection Support, is a subcontract under NAICS code 541380, issued by the Department of Defense through DEPOT OKLAHOMA, with performance centered at TINKER AFB, ZIP 73145-8000. Solicitation opened on August 5, 2026, with a response deadline of August 17, 2026. While no set-aside type is specified, the contract is accessible to eligible subcontractors who can deliver compliant quality documentation and, when required, facilitate third-party inspection services. All submissions must adhere to the technical and procedural expectations outlined in the solicitation to ensure alignment with defense logistics standards.

General Info

Suppliers must provide quality compliance certificates and traceability data with shipments, with possible third-party inspections for non-QSLD vendors.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DEPOT OKLAHOMA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide a Certificate of Quality Compliance with each shipment, including traceability data; may involve third-party inspection for non-QSLD suppliers.

Similar Contracts

Same NAICS industry code

Backflow Prevention Device Testing & CertificationThe contract requires annual testing and certification of backflow prevention assemblies across all Texas Department of Transportation facilities to ensure compliance with public health and safety standards. This work is essential to prevent contamination of potable water systems by isolating non-potable sources and maintaining the integrity of the water supply throughout TxDOT operations. Services must be performed in accordance with state and federal regulations, and the contractor must provide documented certification of each tested device to verify compliance. The contract is classified as a subcontract under NAICS code 541380, indicating it falls within the category of other scientific and technical consulting services. The solicitation was posted on August 6, 2026, with responses due by September 8, 2026. There is no designated set-aside type specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or ownership characteristics. Performance will occur at various TxDOT locations throughout the state of Texas, and the contractor must be prepared to access and service devices at multiple sites on an annual basis without disruption to facility operations.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

in about 1 month

J035--AIR TESTING AND CERTIFICATION SERVICES

Solicitation # 36C26226Q1235

This solicitation, issued as a combined synopsis and request for quotations under Federal Acquisition Regulation subpart 12.6, seeks Air Testing and Certification Services for the San Diego VA Medical Center under solicitation number 36C26226Q1235. The procurement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with a NAICS code of 541380 and a small business size standard of $19.0 million. The contractor must provide AABC-certified testing and certification of critical and non-critical area air systems, including semi-annual testing of all critical rooms and annual testing of approximately one-quarter of the 1,406 non-critical rooms totaling 257,279 square feet. All work must be performed or supervised by independent AABC-certified technicians, and an asbestos-certified technician and controls technician must also be provided to operate automated systems and deliver onsite instruction. Deliverables include certified TAB reports with detailed drawings, air flow measurements, pressure gradients, and calculated air change rates, submitted in six copies within five working days of completion. The contract is anticipated to be awarded as a firm-fixed-price agreement with a base performance period of one year, from September 1, 2026, through August 31, 2027, and includes up to four one-year option periods extending through August 31, 2031. Offers must be submitted electronically by 12:00 PM PST on August 14, 2026, via email to two designated VA addresses, clearly labeled with the solicitation number and contract title, and must be formatted as four separate, unzipped PDF files corresponding to technical approach, pricing, experience, and required documentation. Offers are subject to mandatory certifications including VAAR 852.219-75 and -76, SAM registration, W-9, FMS Vendor File Update Form, and SBA DSBS registry listing. The government will evaluate submissions without discussions, prioritizing the most advantageous offer based on price and other factors, with strict pass/fail gates for documentation compliance. Invoicing must be performed exclusively through the Tungsten Network in arrears on a monthly basis, and the contractor is prohibited from using FASC-prohibited unmanned aircraft systems, covered telecommunications equipment under Section 889, or engaging in racially discriminatory DEI practices. Compliance with sustainable product

262-NETWORK Contract Office 22 (36C262)

POSTED

about 8 hours ago

DEADLINE

IFB P2695016 Cannabis, Pesticide, and Witness Testimony Services

Solicitation # 0000039956

The State of California is seeking a qualified contractor to provide comprehensive cannabis, pesticide, and witness testimony services to support the Cannabis Enforcement Program through the Department of Fish and Wildlife. The contractor must perform quantitative analysis of tetrahydrocannabinol levels in confiscated cannabis plant samples and identify illicit pesticides used on these plants, many of which carry foreign labeling and constitute felony violations. Analysis must be conducted with scientific rigor to ensure admissibility in court, as these findings directly inform prosecutorial decisions and criminal charges. Beyond laboratory testing, the contractor is required to provide expert witness testimony to explain testing methodologies, validate results, and defend findings during legal proceedings, ensuring the integrity and credibility of evidence presented in court. The solicitation closes on August 21, 2026, at 3:00 PM Pacific Time, and all bids must be submitted in accordance with the official invitation for bid. Performance is expected to be centered in West Sacramento, with samples processed and testimony delivered as needed statewide. The contractor must be fully accredited and具备 the technical expertise to handle forensic-level cannabis and pesticide analysis under criminal investigation standards. Interested vendors are advised to review all documents in the official bid package and register on the state’s procurement portal if required. Questions regarding the bid's content or requirements must be directed to the designated state contact, as Biddingo.com provides only informational support and assumes no liability for the accuracy or completeness of third-party materials.

State of California

POSTED

about 13 hours ago

DEADLINE

CCTV Inspection and Cleaning of Sewer Lines

Inliner Solutions, LLC

POSTED

about 16 hours ago

DEADLINE

HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring

Solicitation # HP-CLEANROOM-RFP

HealthPRO Procurement Services Inc. has issued a competitive request for proposal titled HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring with solicitation number HP-CLEANROOM-RFP, open for responses until September 15, 2026. The posting encompasses four distinct service categories: cleanroom certification and recertification including HEPA filter integrity testing, air changes per hour, temperature, humidity, and pressure differential monitoring; primary engineering control certification for biological safety cabinets, laminar airflow workbenches, and compounding aseptic containment isolators; environmental air and surface sampling and monitoring; and hazardous drug wipe sampling for surface contamination testing. All contract documentation and future amendments must be accessed through Euna, and bidders are advised that no additional updates will be provided elsewhere. The opportunity is managed by 3SHealth under the Saskatchewan Public Sector with Alysa Palazzo listed as the primary point of contact, and although posted on SaskTenders, participation by 3SHealth is not guaranteed and remains contingent upon existing contractual obligations at the time of potential selection.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Infrastructure - Invitation to Bid - Hazardous Building Materials Assessments & Hazardous Building Materials Management Plan Development – North Area Buildings

Solicitation # AB-2026-05519

BGIS has been engaged by Alberta Infrastructure to conduct hazardous building materials assessments and develop hazardous building materials management plans for buildings in the North Area. The work involves identifying, evaluating, and documenting the presence of hazardous materials such as asbestos, lead-based paint, radon, and other regulated substances across a portfolio of provincial facilities. The contractor is responsible for performing site inspections, collecting and analyzing samples, preparing detailed reports, and creating comprehensive management plans that outline mitigation strategies, removal protocols, and long-term monitoring procedures in compliance with provincial regulations and safety standards. The project requires coordination with facility stakeholders and adherence to strict health and safety protocols during all phases of assessment and planning. The solicitation for this contract was issued under reference number AB-2026-05519 and was posted on August 5, 2026, with a response deadline of August 19, 2026. Primary point of contact for inquiries is Jess Pylypow, Facility Manager, reachable via email. The scope of work applies exclusively to buildings located within the North Area of Alberta, and the contractor must demonstrate technical expertise in hazardous materials assessment, regulatory compliance, and project documentation. All deliverables must align with Alberta’s environmental and occupational health requirements, and the successful bidder will be expected to provide timely, accurate, and actionable data to support infrastructure decision-making and public safety.

POSTED

about 24 hours ago

DEADLINE

Winstar Thermal Scans

Solicitation # 27551

Winstar is soliciting bids to perform thermal scans across designated electrical and mechanical areas including CTUA MSA 1-4 with IR windows installed, the chiller room, Florida Expansion Room, Room 4507, Crown Room #22, Old Executive Room, DPE Room #18, and the Administration Electrical Barn. The solicitation, identified by number 27551, was posted on August 5, 2026, with a response deadline of August 12, 2026. The contract is being issued by the Chickasaw Nation, a tribal organization, and no set-aside classification or NAICS code is specified. Proposals must be submitted by the stated deadline, and inquiries can be directed to Charles Wright at charles.wright@chickasaw.net. The place of performance and office address details are not provided, and further information can be accessed through the Chickasaw Business Network’s bid board website.

Chickasaw Nation

POSTED

DEADLINE

Construction Materials Sampling and TestingThis contract requires the provision of field and laboratory testing services for asphalt, concrete, and other construction materials used in transportation infrastructure projects under the jurisdiction of the California Department of Transportation. The scope includes performing material sampling, analysis, and compliance verification in accordance with Caltrans material control protocols, as well as conducting plant inspections to ensure adherence to established standards. All testing activities must align with state regulatory requirements and maintain the integrity of construction quality assurance programs. The contract is classified as a subcontract under NAICS code 541380, indicating it pertains to architectural, engineering, and related services. It was posted on August 5, 2026, with a response deadline of September 4, 2026, at 6:00 PM. The work is expected to be performed across California, with performance locations tied to active Caltrans projects. The solicitation is managed through the CalEProcure portal, and bidders must submit proposals prior to the stated deadline to be considered for award.

California Department of Transportation

POSTED

DEADLINE

Quality Inspection and Compliance TestingThe contract requires in-process and final quality inspections conducted in accordance with MIL-STD-1916 or ASQ Z1.4 sampling standards, with acceptance quality levels set at 0.1 for critical defects and 1.0 for major defects. These inspections must ensure strict adherence to defined quality thresholds and include the systematic generation of compliance documentation, specifically Certificates of Quality Compliance and DD Form 1423, to verify conformance throughout the manufacturing and delivery process. The work is tied to a subcontract under the NAICS code 541380 and is managed by the ASC Commodities Division within the Department of Defense. Performance of all quality assurance activities must occur at the specified location in Corpus Christi, Texas, with a zip code of 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with no set-aside type indicated. The contract emphasizes formal documentation and compliance verification aligned with defense standards, and interested parties must respond through the provided DIBBS portal link to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Regulatory Compliance – Hexavalent Chromium Prohibition (DFARS 252.223-7008)The contract requires verification and certification that all valves and their packaging strictly comply with the Department of Defense’s prohibition on hexavalent chromium as mandated by DFARS 252.223-7008. This regulatory requirement ensures that no components or packaging materials contain hexavalent chromium, a toxic substance restricted under federal defense contracting standards. The subcontractor must provide documented proof of compliance, confirming through testing, material declarations, or supply chain controls that the delivered items meet the chemical restrictions outlined in the regulation. The solicitation is classified as a subcontract under NAICS code 541380, with a response deadline of August 17, 2026, and was posted on August 5, 2026. Performance is required at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Compliance is non-negotiable, and any failure to certify or substantiate the absence of hexavalent chromium will result in rejection of the submission. The contract emphasizes supply chain transparency and technical accuracy, placing responsibility squarely on the subcontractor to deliver certified, compliant products without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Quality Inspection and Compliance TestingThis contract requires third-party inspection and testing of manufactured brackets to ensure full compliance with ISO 9001 quality management standards, MIL-STD-105 sampling procedures for acceptance quality limits, and Defense Logistics Agency quality requirements. The work is focused on verifying dimensional accuracy, material integrity, and process consistency of brackets produced for military applications, with results documented and submitted to confirm adherence to specified technical and quality benchmarks. The inspection activities must be conducted by an accredited independent laboratory or service provider with demonstrated expertise in defense supply chain compliance. The contract is classified as a subcontract under NAICS code 541380, associated with engineering services, and is managed by the Department of Defense through its Land Supply Chain organization. Performance is required at the designated location in Anniston, Alabama, with a response deadline of August 17, 2026. Interested parties must submit proposals by the deadline, and all testing protocols must align with current military and international standards without deviation. The contractor is expected to provide detailed reports, audit trails, and corrective action plans where nonconformities are identified, ensuring traceability and accountability throughout the inspection process.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection & CertificationThe contract requires third-party inspection and certification of manufactured spacer sleeves to ensure dimensional accuracy, material conformance, and surface finish meet stringent defense quality standards. All inspections must be performed according to specified technical requirements and documented with formal reporting that aligns with Department of Defense quality assurance protocols. The work is classified as a subcontract under NAICS code 541380 and is tied to performance at Tinker Air Force Base, Oklahoma, with the agency responsible being the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Responses are due by August 13, 2026, and all deliverables must be submitted through the designated DIBBS portal to satisfy contractual obligations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Instruction Plate Manufacturing and DeliveryThe contract requires the manufacture and delivery of three military instruction plates identified by NSN 9905008816118, fully compliant with the technical data package TDP Rev A Gen 1 and all referenced part numbers and marking standards. The work must be executed to meet stringent military specifications, ensuring each unit is accurately produced and labeled in accordance with established guidelines. This is a subcontract under the NAICS code 332320, indicating classification within the other fabricated metal product manufacturing sector, and is issued by the Department of Defense through the agency known as DEPOT OKLAHOMA. Performance is to occur at TINKER AFB with a ZIP code of 73145-8000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The opportunity is not set aside for any specific small business category, and interested parties must submit proposals via the designated DIBBS portal before the stated deadline.

POSTED

DEADLINE

Certification & Quality Documentation (CDRL-METALSCERT)The contract requires the preparation and submission of a Certificate of Quality Compliance under CDRL-METALSCERT, aligned with DD Form 1423, to verify that all materials meet stringent quality standards. This includes providing full material traceability, documented test results, and explicit confirmation of compliance with SAE AMS6411K specifications, ensuring that all metallic components are manufactured and tested to precise aerospace industry requirements. The documentation must be thorough, accurate, and fully auditable to satisfy the Department of Defense’s quality assurance protocols. The contract is issued under the NAICS code 541380 and is classified as a subcontract tied to the Department of Defense, specifically managed by Depot Oklahoma at Tinker AFB with a postal code of 73145-8000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, indicating a tight turnaround for compliance and submission. All deliverables must be prepared and transmitted through the DIBBS platform using the provided link, and failure to meet the specified technical, traceability, or documentation requirements could result in non-compliance and potential contract penalties.

Testing Laboratories and Services

POSTED

DEADLINE

Marking & Labeling ServicesThe contract requires the application of continuous, legible, and waterproof markings on each bar in strict compliance with MIL-STD-129 standards, ensuring that each item is labeled with the National Stock Number, contract number, and heat or lot number using approved marking methods. This work must be performed with precision to meet military specification requirements for identifiability and durability under operational conditions. The contract is issued under the NAICS code 811411 by the Department of Defense through DEPOT OKLAHOMA, with performance located at TINKER AFB, 73145-8000. It is classified as a subcontract and was posted on August 5, 2026, with proposals due by August 17, 2026. All marking activities must adhere to the specified government standards and be executed in a manner that ensures uniformity, traceability, and long-term readability in the field.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for steel bars in strict accordance with MIL-STD-2073-1E and ASTM A700 standards, ensuring that all materials are protected against corrosion, damage, and environmental degradation during storage and transit. Preservation codes Z and ZZ must be applied to meet specified protective requirements, and all work must comply with DLA RP001 standards to guarantee operational readiness and uniformity across Defense Logistics Agency shipments. The scope encompasses end-to-end packaging processes including materials handling, labeling, crating, and documentation to ensure full traceability and compliance. This subcontract, issued by the Department of Defense under the agency name DEPOT OKLAHOMA, is tied to a performance location at Tinker AFB with a ZIP code of 73145-8000 and falls under the NAICS code 561910 for other support activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. All proposers must be prepared to demonstrate technical capability, quality assurance practices, and adherence to military packaging specifications, with no set-aside provisions indicated. The contract is accessible via the DIBBS portal on the provided URL for detailed submission instructions and supplementary requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Cutting & Length ConformanceThe contract requires the precision cutting of steel bars to exact whole-foot lengths between 10 and 12 feet, with stringent dimensional accuracy and clean finishes to comply with military specifications. The work must ensure consistent quality and conformance to technical standards expected in defense applications, where even minor deviations in length or cut integrity could compromise performance or integration. This subcontract is issued under NAICS code 332312, indicating it falls within the forged and stamped metal manufacturing sector, and is managed by the Department of Defense through its depot at Tinker Air Force Base, Oklahoma, with performance required at the 73145-8000 ZIP code location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is actively open for bid submissions. No set-aside classification is specified, meaning eligibility is open to all qualified contractors, regardless of business size or ownership status. The contracting office is based at Tinker AFB, a major aerospace and logistics hub for the U.S. military, underscoring the operational criticality of the deliverables. All work must be performed in accordance with military-grade tolerances, and failure to meet dimensional or finish requirements may result in rejection of the product and potential contract penalties.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Steel Bar Manufacturing & Supply (UNS K23080)The contract calls for the manufacture and supply of round steel bars made from UNS K23080 material, with a precise diameter of 1.250 inches and lengths ranging between 10 and 12 feet, delivered in whole-foot increments. All bars must fully comply with the SAE AMS6411K specification, ensuring the material meets stringent metallurgical and mechanical requirements for performance and consistency. The work is scoped as a subcontract under the NAICS code 331110, indicating it relates to steel mills and ferroalloy manufacturing, and is being procured by the Department of Defense through the Oklahoma Depot at Tinker AFB, with the delivery address set to 73145-8000. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day response window for qualified suppliers. The contract is not subject to any specific set-aside provisions, making eligibility open to all competent manufacturers. Performance must be executed to meet or exceed the referenced aerospace and defense standards, given the critical nature of the material for defense applications. Delivery must align with the specified dimensions, tolerances, and material certification requirements, and the successful vendor will be expected to support inspection, testing, and documentation compliance as demanded by the Department of Defense procurement process.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires strict adherence to hazard communication standards for aluminum alloy materials that pose a combustible dust risk during processing, specifically mandating compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 under the Globally Harmonized System of Classification and Labeling of Chemicals. All applicable hazard warning labels must be accurately applied to ensure proper identification of dust-related combustion hazards throughout the handling, storage, and processing lifecycle. This obligation extends to all subcontractors and personnel involved in the handling of these materials, with full documentation and verification of label accuracy and placement required. The solicitation is a subcontract under the Department of Defense, managed by DEPOT OKLAHOMA at TINKER AFB with a zip code of 73145-8000, and falls under the NAICS code 541690 for other scientific and technical consulting services. The posting date is August 5, 2026, and responses are due by August 17, 2026. The contract does not specify a set-aside designation, and all submissions must be made through the designated DIBBS portal link. Compliance is non-negotiable and failure to meet labeling requirements may result in rejection of deliverables or contractual penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging, Preservation, and MarkingThe contract requires comprehensive packaging, preservation, and marking of aluminum materials in strict adherence to MIL-STD-129, MIL-STD-2073-1E, RP001, and ASTM B660 standards, ensuring all materials are properly labeled, palletized, and protected for military use. The work encompasses the full lifecycle of packaging compliance, from material handling and corrosion prevention to the accurate application of markings and documentation required by federal military specifications. All activities must support secure, traceable, and durable storage and transport under demanding conditions. The solicitation is classified as a subcontract under NAICS code 493190 and is issued by the Department of Defense through DEPOT OKLAHOMA, with performance required at TINKER AFB, Oklahoma, 73145-8000. The response deadline is August 17, 2026, and interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military and industry standards. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.

Other Warehousing and Storage

POSTED

DEADLINE

Aluminum Structural Angle Supply (6061-T6 Alloy)The contract calls for the supply of approximately 901 feet of aluminum structural angle measuring 3.00 inches by 3.00 inches with a 0.250 inch wall thickness, with allowable length variations between 20 and 30 feet and a tolerance of ±10% on total quantity. All material must be manufactured from 6061-T6 aluminum alloy and comply with the technical specifications outlined in SAE AMS-QQ-A-200C and ASTM B666/B666M-20 to ensure structural integrity and consistent performance. The materials are intended for use in defense-related applications, as indicated by the procurement under the Department of Defense through the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, ZIP 73145-8000. The solicitation is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The North American Industry Classification System code 331311 identifies the industry as Aluminum Die and Foundry Products Manufacturing, reinforcing the focus on precision metal fabrication. There is no set-aside designation specified, and the contract is open to eligible suppliers who can meet the stringent material standards and delivery timelines. The full solicitation details and submission process are accessible through the DIBBS platform using the reference number SPE8E426T1975.

Alumina Refining

POSTED

DEADLINE

Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Specialized Packaging, Preservation, and MarkingThe contract requires specialized packaging, preservation, and marking of metal sheets in full compliance with ASTM A700, MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring the materials are protected against environmental degradation and maintained in mission-ready condition. This includes secure palletization methods and the application of NSN labeling to meet military logistics and inventory tracking protocols. All work must be performed to guarantee the integrity of the metal sheets during storage and transit, with strict adherence to defense-specific documentation and handling procedures. The solicitation is issued under a subcontract type by the Department of Defense through the Depot Oklahoma office, with performance required at Tinker AFB, Oklahoma, ZIP 73145-8000. The North American Industry Classification System code is 423840, indicating a focus on wholesale trade in metals and minerals. The response deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, providing potential bidders approximately twelve days to prepare and submit their proposals. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the rigorous defense packaging and labeling requirements.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Certification and Documentation Services for Metal SupplyThe contract requires the preparation and submission of quality compliance certificates, mill test reports, and CDRL documentation including DD Form 1423s, all aligned with military aerospace standards to support metal supply requirements. This subcontract is tied to the Department of Defense through the Depot Oklahoma office, with performance expected at Tinker Air Force Base, Oklahoma, 73145-8000. The work demands strict adherence to technical and regulatory frameworks governing aerospace-grade materials documentation, ensuring traceability, material integrity, and compliance with federal defense specifications. Proposals must be submitted by August 17, 2026, following the solicitation issued on August 5, 2026, under NAICS code 541330 which classifies it as engineering services. All deliverables must meet rigorous certification criteria to validate material authenticity and conformity for use in defense systems.

Engineering Services

POSTED

DEADLINE