Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Chaff Expendable Countermeasures - IDIQ

Active
N00019-26-RFPREQ-TPM272-0095Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Naval Air Systems CommandView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Coachella, CA, 92236, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Air Systems Command
Contacts1 person available
OfficePATUXENT RIVER, MD, 20670-5000, USA
Organization / Agency
Department Of Defense → Naval Air Systems Command
View Agency Profile
Office AddressPATUXENT RIVER, MD, 20670-5000, USA
Contacts
Elizabeth Lamb

Full Description

Show more

DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.


INTRODUCTION: The Naval Air Systems Command (NAVAIR) at Patuxent River, MD announces its requirement to procure the production and delivery of the RR-129, RR-144, RR-170, RR-180, RR-188, RR-198, RR-199, and RR-203, a timed-release Chaff Expendable Countermeasure with higher Radar Cross Section (RCS) capability to create threat disadvantage, provide increased survivability, and expanded frequency coverage.  The estimated contract value will be $225,000,000.00 across United States Navy and Marine Corps, United States Air Force, Joint Program Office (JPO) and Foreign Military Sales.


The proposed class of contracting actions will procure an estimated range of 30,000 – 500,000 units per year for Fiscal Year (FY)28 through FY32 to satisfy both domestic and foreign requirements.


THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible businesses capable of providing the services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice.


ELIGIBILITY: The Product/Service Code (PSC) for this requirement is 5865: Electronic Countermeasures, Counter-countermeasures and Quick Reaction Capability Equipment. All interested businesses are encouraged to respond.


ANTICIPATED PERIOD OF PERFORMANCE:  This contract is planned to contain a five year ordering period to satisfy requirements for FY28 through FY32. The anticipated award date is February 2028. The Government anticipates end item deliveries will commence as early as 6 months, but no later than 12 months after each contract delivery order award. Initial production is anticipated to be an estimated 3-7 devices per month.


ANTICIPATED CONTRACT TYPE:  The contract type for this contract is anticipated to be Firm Fixed.


PROGRAM BACKGROUND: The RR-129, 144, RR-170, RR-180, RR-188, RR-198, RR-198, and RR-203 Chaff Countermeasures are designed to defeat enemy radar guided anti-aircraft missiles. These devices are an advanced countermeasure with mmWave technology capable of producing high Radar Cross Section (RCS) across the desired spectrum. These Chaff devices are designed to protect against radar-guided surface-to-air and air-to-air missiles.


REQUIRED CAPABILITIES: The Contractor must possess the manufacturing technology, infrastructure, and capacity to produce the RR-129, RR-144, RR-170, RR-180, RR-188, RR-198, RR-199, and RR-203 Chaff Expendable Countermeasures for the estimated quantities and within the required timelines.


Interested businesses shall demonstrate that your company currently possesses or has authorized access to the necessary technical data, or has a viable plan to obtain, generate, or otherwise secure the necessary technical data, and that it will be maintained throughout the duration of the effort being solicited. Interested businesses shall demonstrate the capability to complete the requirement within the Government’s required timeline. You may also submit information that demonstrates how you could potentially meet this requirement for future production opportunities.


SUBMISSION DETAILS: Interested businesses shall submit a brief capabilities statement package (no more than twelve (12) 8.5 x 11 inch pages, font no smaller than 12 point, 1.5 line spaced) demonstrating their ability to perform the requirements described herein.


In addition to these requirements, interested businesses shall adhere to the following submission instructions: 


1. Document Type: Microsoft Word


2. Delivery: The capability statement package shall be sent by electronic mail (email) to Elizabeth V. Lamb at elizabeth.v.lamb2.civ@us.navy.mil.


3. Response Date: Submissions must be received via email no later than 3:00 p.m. Eastern Standard Time on 21 August 2026.


4. No classified information shall be submitted in response to this Sources Sought.


5. Questions or comments regarding this notice may be addressed to Elizabeth Lamb at the above email address. No phone calls will be accepted.


6. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, Cage Code, and Points-of-Contact (POC) including name, phone number, and email address.


7. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.



Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
Federal
Expeditionary Unmanned Aerial System (eUAS) Manufacturing and Employment Capability Request for Information
Solicitation # RSO-AMPOECT-04
The United States Air Force Rapid Sustainment Office is seeking market input on an expeditionary unmanned aerial system manufacturing and employment capability through a Capability Request for Information, designated RSO-AMPOECT-04. This initiative aims to identify commercially available solutions for rapid, on-demand production of attritable UASs, first-person view drone kits, counter-UAS interceptors, and associated components in remote and contested environments, reducing dependence on traditional supply chains. The system must be transportable in standard ISO containers, ruggedized to MIL-STD-810 environmental standards, and capable of operating across extreme temperatures from -40°F to 125°F using military-grade power sources and integrated climate control. Compliance with NDAA Section 848 and exclusion of components from covered nations such as China, Russia, Iran, and North Korea is mandatory, with strict adherence to Buy American Act requirements and DCMA Blue List architecture. The solution must feature an open system architecture supporting standard file formats like STL and STEP, enable modular and interchangeable materials, and incorporate FIPS 140-2/3 encrypted storage with full integration of the DoD Risk Management Framework for cybersecurity. Respondents must submit a white paper limited to 11 pages total, partitioned into one page of business information and ten pages detailing technical capabilities and past experience. The submission must clearly address system design for drone-agnostic manufacturing, production timelines from request to field deployment, logistics footprint, power and environmental resilience, durability metrics, and current Technology and Manufacturing Readiness Levels. Experience in assembling UASs under austere conditions, managing compact system weight, interfacing with off-grid power, and deploying rapidly in field conditions will be heavily weighted. Proprietary information must be clearly marked and will be protected in accordance with the Trade Secrets Act and Economic Espionage Act under controlled review by government and contracted technical personnel. All responses must be sent electronically to aflcmc.rod.ect@us.af.mil no later than 30 calendar days after posting on sam.gov, with no reimbursement provided for response costs and no binding obligation assumed by the government. Questions must be submitted in writing prior to the deadline and will be addressed publicly or on a case-by-case basis if proprietary.
FA8684 Aflcmc Rodk

POSTED

about 7 hours ago

DEADLINE

in 21 days
View Details

More opportunities from Department Of Defense → Naval Air Systems Command

Same awarding agency

NAICS: 336411
New
Federal
Unmanned Carrier-Based Aircraft Solutions Request for Information (RFI)
Solicitation # PAEA-UnmannedStratSS
The Naval Air Systems Command is seeking industry input through a Sources Sought notice for next-generation unmanned carrier-based aircraft to support the Naval Aviation Enterprise’s Air Wing of the Future strategy, aligned with the Golden Fleet initiative. The focus is on identifying capable industrial partners who can design, develop, prototype, manufacture, and field autonomous platforms optimized for deployment from Ford-class and Nimitz-class nuclear aircraft carriers. The desired solutions may include single-role, multi-role, or modular systems that integrate with existing Family of Systems such as the MQ-25A and Collaborative Combat Aircraft, with an emphasis on operational effectiveness, autonomy, and carrier compatibility. The government aims to use the information gathered to shape future requirements, investment priorities, and acquisition pathways for unmanned aviation capabilities. Responses must be submitted electronically by 5:00 PM EST on August 13, 2026, to the designated Navy mailbox with a copy to Contract Specialist Samantha Moore. Submissions are limited to ten pages using Times New Roman 12-point font and single spacing, with optional accompanying PowerPoint presentations not exceeding twenty slides and no video content. All information must remain unclassified. The solicitation, identified as PAEA-UnmannedStratSS, was posted on July 14, 2026, and is issued under NAICS code 336411. No set-aside provisions apply, and responses are welcome from all qualified industry entities. Point of contact for inquiries includes Samantha Moore and Jacob Leighton, with the office located at Naval Air Station Patuxent River, Maryland.
Aircraft Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
Federal
C-12W Contractor Logistics Support Follow-on
Solicitation # N00019-26-RFPREQ-APM207-0738
The Naval Air Systems Command (NAVAIR) is preparing to solicit a follow-on Contractor Logistics Support (CLS) contract for the U.S. Marine Corps C-12W aircraft fleet, succeeding the current task order under the CMMARS contract with Vertex Aerospace LLC, which expires October 31, 2027. The requirement encompasses comprehensive maintenance, repair, supply chain management, and field support services across multiple U.S. and international locations, including sites in Japan, Germany, the Middle East, and various U.S. military bases. Offerors must demonstrate access to FAA-certified King Air 350 CER repair stations with the capability to manage government-owned assets, including APUs, landing gear, and peculiar and common support equipment, while adhering to best commercial practices. The acquisition will be structured as a competitive, indefinite-delivery/indefinite-quantity (IDIQ) contract with performance slated to begin in the fourth quarter of FY27. Industry engagement is a critical component of the planning phase, with an industry day scheduled for August 11, 2026, in California, Maryland, where attendees must register by August 6, 2026, to participate and request one-on-one meetings. A Draft Statement of Work will be distributed by August 4, 2026, and a Draft RFP is expected in October 2026, followed by a final RFP targeted for February 2027. Interested parties must submit a three-page capabilities statement addressing past performance, subcontractor management, technical expertise, small business status in accordance with NAICS code 488190, compliance with FAR 52.219-14 for work performance thresholds, access to commercial parts inventories, experience with configuration changes, ITAR/export compliance, and transition readiness within 90 days. Responses are due no later than 2:00 p.m. EST on August 6, 2026, to the designated point of contact, and all submissions must include company details and points of contact. The government emphasizes that this is purely an information-gathering effort with no obligation to procure and no funds available for response preparation.
Other Support Activities for Air Transportation

POSTED

1 day ago

DEADLINE

in about 1 hour
View Details
NAICS: 334220
New
Federal
Global Positioning System (GPS) Receivers
Solicitation # N0002426RFPREQIWS300111
The Naval Air Systems Command plans to award a sole-source purchase order to BAE Systems Electronic Systems for 160 M-Code GPS receivers and 200 NavStrike 3.7 GPS receivers to support the Over-the-Horizon Weapon System, Naval Strike Missile, and Joint Strike Missile programs. BAE Systems is designated as the only responsible source due to its original design, development, and manufacturing role for both receiver systems, and the government lacks sufficient technical data or license rights to enable competitive procurement. The procurement is justified under 10 U.S.C. 3204(a)(1), which permits sole-source awards when only one vendor can meet the required capabilities within the needed timeframe. No funding will be allocated to develop alternative sources, and the government retains full discretion to proceed without competition based on responses to this notice. The solicitation number is N0002426RFPREQIWS300111, with a response deadline of August 12, 2026, and the action is classified under NAICS code 334220. The contract will be administered by NAVAIR in Patuxent River, Maryland, with performance located in Cedar Rapids, Iowa. There is no set-aside designation, and no financial commitment or obligation is implied by this notice; the government makes no promise to award the contract, and all information provided is subject to change. Point of contact for inquiries includes Brittany Graves and Lindsey Boka, both of the U.S. Navy.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Repair of Kell-Strom T-400 Riveter
Solicitation # N68520-26-SIMACQ-JC00000-0250
The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 336414
New
Federal
BrAF Implementation of ECP 4468 for Operational Flight Software
Solicitation # N00019-26-RFPREQ-WPM201-0274
The Naval Air Systems Command, through the Precision Strike Weapons Office, plans to award a Firm Fixed Price Delivery Order to The Boeing Company under Basic Ordering Agreement N00019-26-G-1002 to implement Engineering Change Proposal 4468 for Operational Flight Software Support targeting the Brazilian Air Force. This action is being conducted on a sole source basis because Boeing is the exclusive designer, developer, manufacturer, and integrator of the Harpoon/SLAM ER missile systems and holds proprietary technical knowledge, software, algorithms, facilities, and manufacturing expertise essential to fulfilling the requirements within the required timeline. No other entity possesses the necessary capabilities to meet the government's needs, justifying the use of 10 U.S.C. 2304(c)(1) and FAR 6.302-1 authority. Subcontracting opportunities may be available through direct engagement with Boeing, and all inquiries should be directed to the point of contact provided. The solicitation number is N00019-26-RFPREQ-WPM201-0274, posted on August 4, 2026, with responses due by August 19, 2026, under a presolicitation notice. The work is assigned a NAICS code 336414 and will be performed in St. Louis, Missouri, while the contracting office is located at Patuxent River, Maryland. The primary point of contact is Mason Harrison, with Lindsey Boka as the secondary contact. There is no guarantee of award, and the government is not obligated to proceed with solicitation or make any financial commitments prior to a formal delivery order. Any information provided is subject to change, and no party should incur expenses in anticipation of an award.
Guided Missile and Space Vehicle Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 336411
New
Federal
P-8A Poseidon Increment 3 Block 2 Modification Kit Installation
Solicitation # N00019-26-RFPREQ-APM290-1115
The U.S. Navy, through the Naval Air Systems Command, is seeking information from industry on the capability to execute a complex retrofit installation of the P-8A Poseidon Increment 3 Block 2 (I3B2) modification under Engineering Change Proposal ECP6. This sourcing effort is strictly for market research and does not constitute a solicitation for proposals or a commitment to award a contract. Respondents must demonstrate specific experience and infrastructure to deinstall and reinstall mission systems and wiring on P-8A aircraft, receive and install Government-furnished modification kits including fiber-optic cables and antennas, and perform post-installation verification using government-provided software. The work must comply with strict technical standards, including Net-Ready Key Performance Parameters, and must maintain compatibility with the aircraft’s open architecture and all-weather operational requirements. All submissions must be unclassified, contain no proprietary markings that restrict government sharing with support contractors, and include a clear statement permitting disclosure under DFARS 252.227-7015. Companies must submit a Capability Statement of no more than 15 single-spaced pages and a completed P-8A Capabilities Questionnaire by August 27, 2026. The questionnaire requires detailed information on company size, facility specifications including hangar capacity for multiple P-8A aircraft, security infrastructure for handling classified government property, past performance on militarized 737 platforms, AS9100/AS9110 certifications, and compliance with flight and ground operations standards. Respondents must confirm active Boeing licensing agreements to access proprietary technical data and disclose any associated fees. They must also clarify data rights implications and confirm whether they can provide the government with Government Purpose Rights or Limited/Restricted Rights. Small businesses must self-perform at least 50% of the cost of performance using their own labor and cannot count subcontractor costs toward this threshold. Capacity metrics, including simultaneous work-in-progress, annual throughput, and surge capability for accelerated schedules, must be clearly defined. All submissions must be emailed in Word or searchable PDF format with a specified subject line and must not be zipped.
Aircraft Manufacturing

POSTED

4 days ago

DEADLINE

in 20 days
View Details
NAICS: 336413
Federal
Retrofit of Digital Red Switch System (DRSS) Production Support Assets
Solicitation # N00019-26-RFPREQ-APM271-0083
The Department of the Navy’s Naval Air Systems Command intends to modify an existing firm fixed price delivery order under a basic ordering agreement to retrofit Government-Furnished Block I Digital Red Switch System production assets to Block II configuration for sustaining the E-6B aircraft, involving a range of critical components including Ethernet switches, chassis management modules, power distribution units, processors, cooling systems, and specialized avionics such as the REDSYSMAN1 system and CANISTER for RED VOIP ICS/MAPS. This action is being conducted as a sole source modification to Collins Aerospace due to the highly specialized nature of the technology and the necessity of maintaining continuity with the original equipment manufacturer to avoid unacceptable delays, as authorized under 10 U.S.C. 3204(a)(1) and implemented through FAR Subpart 6.302-1, with no competitive requirements mandated under WTO GPA or FTA, and no small business set aside. The modification, anticipated to exceed the simplified acquisition threshold, does not require contractor qualification for award and technical data is exclusively available through the contractor. While the notice is not a competitive solicitation, responsible parties may submit proposals within 15 days of publication to be considered at the government’s discretion. Responses must be directed to designated Navy points of contact, and subcontracting opportunities are to be pursued directly with Collins Aerospace. The effort is being managed from Pax River, Maryland, with performance occurring in Richardson, Texas, under the NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 336413
Federal
IRST Block II Full Rate Production (FRP) Lots 2 and 3 – Fuel Tank Assembly (FTA), Sensor Assembly Structure (SAS), and Final System Integration
Solicitation # N00019-26-RFPREQ-TPM265-0576
The Naval Air Systems Command plans to award a Firm Fixed Price sole source contract to Boeing Company for the full-rate production of F/A-18 E/F IRST Block II Pod weapon replaceable assemblies, specifically the Fuel Tank Assembly and Sensor Assembly Structure, along with final system integration. The contract requires Boeing to ensure all components function correctly as a unified system and to troubleshoot and resolve any issues that arise during integration, potentially including the design, acquisition, or build of special test equipment. The procurement is authorized under Title 10, U.S. Code 3204(a)(1), citing only one responsible source, with no other suppliers capable of meeting the requirement. This solicitation is a presolicitation notice issued for informational purposes and does not constitute a commitment to award a contract or reimburse any costs incurred by interested parties prior to award. The government has also issued a sources sought notice to assess potential competition, but any responses received will not alter the planned sole source award unless compelling evidence emerges. The response deadline is August 14, 2026, with performance to be conducted in Saint Louis, Missouri. Questions should be directed to Gabrielle Blew or Jessica Myers at the provided contact emails, and small business or subcontracting inquiries should be addressed to Boeing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 336413
Federal
Airborne Radar supporting Multi-mission Maritime Aircraft
Solicitation # N00019-26-RFPREQ-APM290-0758
The Naval Air Systems Command is proceeding with a sole source contract modification to The Raytheon Company, Space and Airborne Systems Division, for the procurement of P-8A Poseidon APY-10 Radar Systems and associated support services. This action is justified under Title 10 U.S.C. 3204(a)(1) and FAR 6.103-1 due to Raytheon’s exclusive status as the sole designer, developer, and manufacturer with the necessary technical knowledge and data to meet the government’s requirements on a timely basis. The base contract covers seven radar systems along with comprehensive support including installation and checkout, configuration management, DMSMS and obsolescence mitigation, reliability and maintainability analysis, FRACAS, engineering change proposals, integrated logistics support, technical data delivery, and repair of repairables. The contract structure includes two option years that may extend the total procurement to up to twenty systems per year, with all deliveries anticipated to be completed by fiscal year 2029. The procurement is being managed under solicitation number N00019-26-RFPREQ-APM290-0758, posted on July 28, 2026, with responses due by August 13, 2026. The primary point of contact for the requirement is Brittney F. Davis, with additional support available from Maria Donnelly, both based at the Naval Air Systems Command in Patuxent River, Maryland. Subcontracting opportunities are to be coordinated directly with Raytheon through Scott McCrory.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 336413
Federal
Hot Section Wash Kits
Solicitation # N00019-26-RFPREQ-APM261-0463
The Naval Air Systems Command at NAS Patuxent River, Maryland, plans to award a sole-source order under Basic Ordering Agreement N00019-25-G-0004 to General Electric Aerospace in Lynn, Massachusetts, for the procurement of Hot Section Wash Kits. This action is justified under federal statutory authority permitting sole-source procurement when only one responsible source exists and no other product or service can meet the government’s requirements. The solicitation, identified as N00019-26-RFPREQ-APM261-0463, was posted on July 28, 2026, with responses due by August 12, 2026, and falls under NAICS code 336413 for aircraft engine and engine parts manufacturing. The place of performance is designated as Lynn, Massachusetts, consistent with the vendor’s location. The contract does not utilize any set-aside provisions and is being managed directly by the Department of Defense through NAVAIR. Kristin Furfaro serves as the primary point of contact for inquiries regarding the solicitation, with contact information provided for email and phone. Companies seeking subcontracting opportunities are directed to reach out to Brandie Roets, Director of Government Contracts at General Electric Aerospace. The order will be negotiated and awarded without competition due to the unique and specialized nature of the Hot Section Wash Kits and the absence of alternative suppliers capable of fulfilling the technical and operational requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

10 days ago

DEADLINE

in 5 days
View Details