Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHAIN ASSEMBLY, SING

Active
SPE4A5-26-T-318UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two units of a chain assembly, singular, identified by NSN 4010-01-630-3113 and part number 00933-1, manufactured by Tru-Hitch, Inc. The total quantity is two units, priced at $2.00 per unit, with delivery required within 121 days from the contract date, FOB origin. All items must be configured to a precise dimension of 7 x 7 x 7 inches and packaged in accordance with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packaging codes. Marking must strictly follow MIL-STD-129 with no special marking required. Palletization and packaging must comply with DLA’s official packaging requirements. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with both inspection and acceptance occurring at the destination. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise stated, and attribute classifications must align with predefined verification levels or AQLs. Technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The solicitation number is SPE4A5-26-T-318U, issued August 2, 2026, with a response deadline of August 10, 2026, under a federal acquisition framework with NAICS code 332618. The primary point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.

General Info

Two Tru-Hitch chain assemblies at $2 each, 7x7x7 inches, FOB origin, deliver to New Cumberland by December 31, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-318U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHAIN ASSEMBLY,SING
CHAIN ASSEMBLY,SING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TRU-HITCH, INC. 1BZD4 P/N 00933-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017695589 0001 EA 2.000
NSN/MATERIAL:4010016303113
DELIVERY (IN DAYS):0121
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A5-26-T-318U
SECTION B
PR: 7017695589 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONFIGURE CHAIN TO 7 X 7 X 7 INCHES
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/10/2026 Original Required Delivery Date:12/10/2026
SPE4A5-26-T-318U NSN/Part Number: 4010-01-630-3113 Quantity: 2 EA Purchase Request: 7017695589QTY: 2 Delivery: 121 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L1-26-T-905A
The contract pertains to the procurement of two straight-headed pins with NSN 5315-01-648-4914 under solicitation SPE7L1-26-T-905A, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within five days of award, with performance located in Barstow, California, 92311-5015. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contract incorporates mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of technical data to foreign persons anywhere in the world. Contractors must hold an approved US/Canada Joint Certification Program certification, complete DLA-mandated training on handling export-controlled data, and pass the DLA Export-Controlled Technical Data Questionnaire to access such information. The solicitation requires CMMC Level 2 certification for any third-party assessment organization involved, and all responses must be submitted by August 13, 2026. Point of contact is Kristina Derry, with the solicitation available via the DIBBS portal and governed by DFARS 252.225-7048 for export controls.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L5-26-T-4725
The contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-546-9412 and part number 00085140708, supplied by Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4725. Delivery is required within 173 days, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required and no use of mercury or mercury compounds in preservation, packaging, or marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must meet RC001 standards. Mercury-containing components are prohibited except in specific instances such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any such devices must include a secondary containment. The items are subject to a zero variance in quantity and must be palletized per DLA packaging requirements. The point of contact for inquiries is Christopher Walker, and the solicitation closed on August 10, 2026, with a required delivery date of January 31, 2027.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A0-26-T-4023
The contract encompasses the procurement of one straight-headed pin identified by NSN 5315-12-384-4537, with a delivery requirement of five days after order issuance, originally due by July 22, 2026. The item must conform to the DIN1444 revision dated March 1, 2001, and all technical and quality requirements referenced through R codes are incorporated from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Delivery is FOB origin, with government inspection and acceptance occurring at the destination location in Fort Carson, Colorado, ensuring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of pack code U, preservation method 31, unit container BL, and intermediate container ED with a quantity of 100 per container. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and all non-accepted supplies must have government identification removed per RQ011, while bare items must be physically marked per RQ017. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required in the sample unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The contract includes mandatory clauses on equal opportunity for workers with disabilities, employment eligibility verification, combating trafficking in persons, hazardous material identification, safeguarding contractor information systems, NIST SP 800-171 compliance, and prohibitions on hexavalent chromium and Chinese military company items. Payment must be submitted via WAWF only, with no use of IPP authorized. The contractor must disclose UEI and CAGE information for any joint ventures and certify small business status or other socioeconomic classifications if applicable. All hazardous materials require labeling according to OSHA’s Hazard Communication Standard and submission of MSDS prior to award. The contract prohibits unauthorized obligations, mandates accelerated payments to small business subcontractors, and enforces electronic payment and receiving report submissions. The contracting officer retains authority to modify pricing and terms under specified FAR clauses, while the delivery point, markfor, and receiving address are consolidated at Fort Carson, Colorado, with shipping instructions requiring the
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332618
New
DIBBS
Manufacture of Wire Rope Assembly (NSN 4010-01-480-7964)The contract requires the manufacture and delivery of four precision wire rope assemblies designated by NSN 4010-01-480-7964, intended for a critical application that must fully comply with Defense Logistics Agency technical and quality standards. The work is being procured as a subcontract under the Department of Defense, specifically by the ASC Supplier Oper OEM Division, with performance required at Tobyhanna, Pennsylvania, in the zip code 18466-5050. The solicitation, classified under NAICS code 332618, was posted on July 30, 2026, and responses are due by August 7, 2026, providing a seven-day window for offerors to submit proposals. The assemblies must meet exacting specifications to ensure reliability and performance in mission-critical systems, with no flexibility allowed in adherence to the established technical and quality requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Precision Metal Component ManufacturingThe contract pertains to the manufacture of a straight-headed pin identified by NSN 5315-01-628-3587, requiring full compliance with military specifications covering material composition, precise dimensional tolerances, and surface finish standards. The work is classified as a subcontract under NAICS code 332618, indicating specialized metal component fabrication, and must be completed to meet the rigorous quality and performance benchmarks expected by the Department of Defense. Performance of the contract is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must be aligned with military-grade engineering and inspection protocols. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, providing contractors a seven-day window to submit proposals. The contracting activity is under the ASC Commodities Division, part of the Department of Defense, and while no set-aside designation is specified, the requirement is open to qualified vendors capable of fulfilling exacting defense standards. All manufacturing must be executed in accordance with the official military specification referenced by the NSN, and successful proposers will be expected to demonstrate proven capability in precision metal component production, adherence to stringent quality controls, and timely delivery to the designated performance location.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Wire Fabric Manufacturing and SupplyThe contract entails the manufacture and supply of 101 units of wire fabric that must fully comply with military specifications, including rigorous material traceability and quality assurance protocols aligned with DLA standards. All deliverables are required to meet strict compliance benchmarks to ensure suitability for defense applications, with emphasis on documentation, testing, and certification throughout the production lifecycle. The place of performance is designated as Tracy, California, with the DLA Dist San Joaquin office under the Department of Defense serving as the overseeing agency. This is a subcontract solicitation with a posted date of July 30, 2026, and a mandatory response deadline of August 10, 2026. The North American Industry Classification System code 332618 identifies the scope as other fabricated wire products. While no set-aside designation is specified, the requirement demands a capable supplier experienced in defense-grade manufacturing, with the capability to support traceability, inspection, and delivery timelines aligned with federal procurement expectations. The contract is accessible through the DIBBS system under solicitation reference SPE8E426T1938.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
Supply of Unspecified Defense Components (Multiple CLINs)The contract calls for the delivery of 62 units of unspecified defense components distributed across four distinct CLINs, with all items requiring strict adherence to military packaging specifications, hazardous materials handling protocols, and cybersecurity standards to ensure operational readiness and secure logistics. The work is subject to full compliance with federal defense procurement regulations, particularly those governing secure supply chain practices and environmental safety during transportation and storage. This is a total small business set-aside under the SBA program, exclusively reserved for small business concerns, with the NAICS code 332618 indicating manufacturing related to armament and related products. The contract was posted on July 30, 2026, with responses due by August 7, 2026, and performance is to be carried out at the designated location in New Cumberland, Pennsylvania, 17070-5002. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Operating OEM Division, and the procurement is structured as a subcontract under the DIBBS system with the reference number SPE4A526T315B.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Supply of Swept Wire, Faired P (NSN: 4010007690751)The contract solicits the supply of 30 units of military-grade Swept Wire, Faired P, identified by NSN 4010007690751, with strict adherence to defense specifications and full traceability requirements to ensure quality and compliance. This procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small defense contractors. The North American Industry Classification System code 332618 indicates the focus on other fabricated wire product manufacturing, aligning with specialized metal fabrication capabilities required for this component. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. All bids must meet stringent defense standards, including material certification and supply chain transparency, and are to be submitted through the DIBBS platform via the provided link. The contract emphasizes reliability, precision manufacturing, and adherence to military-grade protocols to support critical defense applications.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Supply of Straight Headle Pin (NSN 5315-01-725-1543)The contract calls for the manufacture or supply of one straight headle pin identified by National Stock Number 5315-01-725-1543, which must strictly adhere to all applicable military specifications regarding material, dimensions, performance, and testing. The item must be produced under a zero-defect quality assurance program, ensuring flawless workmanship and compliance with all required technical standards. Proper packaging and marking procedures must be followed to meet Department of Defense requirements, including labeling that ensures traceability and readiness for military logistics systems. Delivery is mandated to the Defense Logistics Agency (DLA) facility in Mechanicsburg, Pennsylvania, with the ZIP code 17050-2411 as the designated place of performance. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the contract type is classified as a subcontract under NAICS code 332618. The contracting activity is the ASC Commodities Division under the Department of Defense, indicating a formal military procurement process requiring strict adherence to federal acquisition regulations and defense production standards.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Supply of Quick Release Pins (NSN: 5315-01-588-2712)The contract requires the manufacture, packaging, and delivery of two quick release pins per military specification to Tracy, California, with a strict delivery deadline of 89 days following award. All items must meet DLA’s technical, quality, and packaging standards as outlined for NSN 5315-01-588-2712, ensuring full compliance with DoD requirements. The work is classified as a subcontract under NAICS code 332618 and is managed by the ASC Commodities Division within the Department of Defense, with performance location specified as zip code 95304-5000. Bids must be submitted by August 7, 2026, following a solicitation posted on July 30, 2026, with no set-aside provisions applying to this opportunity.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Single-Leg Chain Assembly Manufacturing and SupplyThe contract requires the manufacture and delivery of 278 single-leg chain assemblies identified by NSN 4010-01-453-9410 and Part Number 92692A550, all of which must meet detailed technical specifications set by the Defense Logistics Agency. The products must be fully compliant with DLA standards including proper packaging and labeling as mandated for military logistics, and delivery must be made FOB origin, placing responsibility for transit and risk on the buyer upon shipment from the manufacturer’s facility. The contract is structured as a subcontract under the Nuclear Reactor Program within the Department of Defense and falls under NAICS code 332618, indicating a focus on forgings and stampings. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, and the place of performance is designated as Greensboro, North Carolina, with a ZIP code of 27409. While no point of contact or set-aside classification is specified, the contract is publicly accessible via the DIBBS system under solicitation number SPE7M226T5832, and all parties must ensure full adherence to defense procurement protocols covering quality, traceability, and documentation to meet federal supply chain requirements.
NUCLEAR REACTOR PROGRAM

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333414
New
DIBBS
GRILLE, METAL
Solicitation # SPE4A5-26-T-319C
The contract pertains to the procurement of a metal grille identified by part number 439W3234-11D and NSN 1660017143102, with a quantity of two units to be delivered within 347 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item is classified as a critical application item for The Boeing Company. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as MIL-STD-1916 and ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific marking and airworthiness requirements are mandatory, and the item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. The contractor is required to retain supply chain documentation and adhere to FAA bare item marking rules, though unit identification is not required. Packaging must meet RP001 and RP003 standards, and palletization must follow DLA guidelines. The item is non-unique and not subject to DoD unique item identification. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the original required delivery date is July 24, 2027. Price per unit is set at $2.00, totaling $4.00 with no variance allowed in quantity.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE4A5-26-T-319A
The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE4A5-26-T-318B
The contract is for a single electrical plug connector, identified by part number BACC63BP12H3SN and NSN 5935-01-607-4886, with a unit of issue of Each (EA), effective February 1, 2026. The requirement stems from a solicitation issued by the Department of Defense under reference SPE4A5-26-T-318B and is managed by the ASC Supplier Operations OEM Division. Delivery is due within 20 days of contract award, with FOB Origin terms and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking applied. Unit packaging is configured for bulk shipping in a single container with no cushioning or dunnage, and palletization must adhere to DLA-specific packaging guidelines. The item is to be shipped via traceable freight, explicitly excluding parcel post, to the naval air station in Oak Harbor, Washington. Quality assurance requires strict adherence to MIL-STD-1916 or equivalent zero-defect sampling plans, with specified verification levels for critical, major, and minor attributes. Manufacturers must be certified under ISO 9001:2015 and comply with DLA’s technical and quality requirements referenced via R-numbers in the DLA Master List. Government identification must be removed from non-accepted supplies, and measuring and test equipment used in production must be calibrated per RT001. Item Unique Identification is not required per the Service customer’s request. The purchase request number is 7017607376, with a total price of $1.00 for one unit and an original required delivery date of July 22, 2026.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A5-26-T-318F
The contract pertains to the procurement of 166 units of a washer, key, identified by NSN 5310013632832 and part number 4903T22P01, sourced under Solicitation SPE4A5-26-T-318F. Delivery is required within 20 days from contract award, with FOB origin terms and no tolerance for quantity variance — exactly 166 units must be delivered. Inspection and acceptance are both to occur at the origin, with packaging required to comply with MIL-STD-2073-1E and marking aligned with MIL-STD-129, including no special marking code. The product is classified as a critical application item, subject to stringent quality controls outlined in DLA’s master technical and quality requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified. Configuration changes must follow formal engineering change procedures, and non-accepted supplies must have government identification removed per contract stipulations. The item is to be delivered to the Turkish military facility in Eskisehir, with freight handled by A.J. Worldwide Services, and the consignee is the 1st Air Maintenance Factory Directorate. Packaging must meet DLA’s packaging requirements, including unit containment as BD, intermediate container E5, and packing level B. The contract is under the Department of Defense, managed by the ASC Supplier Oper OEM Division, with Steven Lewis listed as the primary point of contact. The solicitation was posted in August 2026 with a response deadline the same month, and the original required delivery date is January 22, 2026. All materials must adhere to the DoD’s authorized unit of issue and relevant ANSI X12 standards, with full technical and quality provisions referenced through DLA’s official master list of technical and quality requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE4A5-26-T-318Y
The contract pertains to the procurement of three vehicular hub and wheel units with NSN 2530-01-686-5163 and part number 70250-12701-102 under solicitation SPE4A5-26-T-318Y. The delivery is required within 588 days from the contract date with a firm delivery deadline of March 21, 2028, and the items must be shipped FOB origin. The quantity is strictly fixed at three units with zero variance allowed. Inspection and acceptance occur at the destination warehouse located at Tracy, California. All packaging must adhere to DLA’s Master List of Technical and Quality Requirements, with specific directives for hazardous and nonhazardous materials: hazardous items must conform to FED-STD-313 and TQ requirement IP025, while nonhazardous items must follow ASTM D3951 unless superseded by higher-priority DLA standards. Packaging and labeling must comply with MIL-STD-129 and palletization must meet RP001 DLA packaging requirements. The Unit of Issue is each unit, with a contract price of $3.00 per unit, totaling $9.00. The shipping address and parcel post address are identical, directing delivery to DLA District San Joaquin, Rec Whse 57, Tracy, CA. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The contract was issued under a federal acquisition framework, categorized under NAICS code 336330, with primary point of contact Stephanie Hewlett from the Department of Defense’s ASC Supplier Oper OEM Division.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325110
New
DIBBS
CLEANING COMPOUND, SOLV
Solicitation # SPE4A5-26-T-318G
The contract is for the procurement of a commercial off-the-shelf cleaning compound, solvent, identified by NSN 6850-01-682-3375 and part number 801-1500-157, supplied by Highland Engineering, Inc., with a CAGE code of 0AK83. The unit of issue is a container (CO), with each container holding 2.0 gallons, and the total quantity ordered is three containers. Delivery is required FOB destination within 202 days, with a required ship date of March 1, 2027, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with packaging strictly governed by MIL-STD-2073-1E and marking required in accordance with MIL-STD-129, including the special marking code ZZ for additional requirements. Palletization must comply with DLA packaging standards, and the material has no shelf life restriction. The product is classified as a hazardous material, mandating full compliance with OSHA's revised Hazard Communication Standard and the Globally Harmonized System of Classification and Labeling of Chemicals. Suppliers must submit GHS-compliant Safety Data Sheets (SDS) and approved product labels for review and approval by technical personnel prior to contract award, and copies must be filed with DLA Aviation HMIRS. Employee training on SDS, labeling, and 29 CFR 1910.1200 requirements is mandatory. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero tolerance for non-conformances unless otherwise specified. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, and all transportation must adhere to DLAD Proc Note C19 for general shipping and C20 for first destination routing.
Petrochemical Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-318Z
This contract, issued under solicitation SPE4A5-26-T-318Z, procures 15 units of a motional transducer pickup with NSN 6695-00-972-3242 from CEC VIBRATION PRODUCTS, LLC, part number 4-103-0001. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with adherence to MIL-STD-1916 or ASQ H1331 for sampling unless otherwise stated, and zero non-conformances are required in sampled lots unless specified otherwise. Configuration changes require formal engineering change proposals, and deviations or waivers must be formally requested. The item is classified as a critical application product and must be physically identified per RQ017 standards. The product must comply with MIL-STD-2073-1E packaging specifications, including packing code Q, packaging level B, and marking per MIL-STD-129 with no special marking code. Palletization follows DLA packaging requirements, and delivery is FOB origin within 20 days of contract award, with no tolerance for quantity variance. The delivery destination is the Parts-Attach General Depot in Tainan City, Taiwan, with the required delivery date set for August 4, 2026. The contract is a total small business set-aside under NAICS code 334513, and all performance and compliance obligations are subject to verification at origin. Government use codes and administrative data are appended for internal tracking and logistics coordination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, CONNECTING
Solicitation # SPE4A5-26-T-319H
This contract pertains to the procurement of one unit of a connecting chain, identified by NSN 4010-01-590-4131 and purchase request 7017659279, under solicitation SPE4A5-26-T-319H. Delivery is required within 20 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA standards, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery address is COMNAVAIRLANT SWWP EQOL HAB in Norfolk, Virginia, with specific container and handling instructions including E5 unit containers and dry preservative methods. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute classifications assigned specific verification levels and AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The item is to be delivered to the government with no variance permitted in quantity, and the original required delivery date is July 27, 2026.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTROL STICK, AIRCR
Solicitation # SPE4A5-26-T-317Z
The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-319P
The contract is for the procurement of three self-indicating bimetallic thermometers under NSN 6685-01-417-6054, sourced from Moeller Instrument Company, Inc. with part number ITD32404-S, delivered FOB origin with a strict 170-day delivery window ending February 28, 2027. The item is designated as a critical application item and must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating it as a delicate instrument. No quantity variance is permitted, and inspection and acceptance occur at the destination, with packaging required to meet DLA’s procurement guidelines and prohibit any mercury-containing substances in preservation, packaging, or marking. Sampling and quality verification follow zero-defect standards under MIL-STD-1916 or comparable plans, with critical attributes held to an AQL of 0.1 and mandatory verification at Level VII. Mercury and mercury compounds are strictly banned unless used in functional exemptions such as batteries or sensors, and any such exempt items must include secondary containment per NAVSEA 5100-003D. The contract references DLA’s master list of technical and quality requirements and mandates compliance with all incorporated technical and quality provisions identified by R or I numbers. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, under freight transport protocols outlined in DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details