Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHAIN ASSEMBLY, TIRE

Active
SPE7L1-26-R-0099Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

General Info

Procure 541 chain assembly tires by July 30, 2026, deliver to Jacksonville, FOB origin, best value evaluation.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

326291 - Rubber Product Manufacturing for Mechanical UseView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(3)

SPE7L126R0099 Evaluation Factors for Award

DOC•evaluation-factors

Solicitation SPE7L1-26-R-0099 Sealed Bid IFB

PDF•ifb

SPE7L126R0099 Section L Instructions to Offerors

DOCX•rfp

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Sarah Harmon
contact@example.gov

Full Description

Show more
CHAIN ASSEMBLY,TIRE . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. .
ADEQUATE DATA FOR THE NSN/Part Number: 2540-12-417-2097 Quantity: 541 EA Delivery: 120 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L1-26-T-891S
The contract pertains to the procurement of 87 units of a SEAL, PLAIN ENCASED component identified by NSN 5330-01-112-1527 and part number 3039000, supplied by CUMMINS INC located in Columbus, IN. The item must comply with DLA packaging requirements and technical specifications outlined in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. The item is strictly prohibited from containing asbestos as defined in FED-STD-313, and government identification must be removed from any non-accepted supplies. Delivery is required within five days of award, with performance specified to occur in Texarkana, TX, 75507-5000. The solicitation number is SPE7L1-26-T-891S, issued on July 29, 2026, with responses due by August 10, 2026, under NAICS code 326291 for rubber product manufacturing. The contracting office is the Department of Defense, Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 326291
New
SLED
Artificial Turf SupplyThe contract involves the procurement of approximately 2,600 square feet of artificial turf designed for outdoor recreational use, adhering to specific project requirements to ensure durability and performance in high-traffic areas. The work is being procured under a subcontract and is tied to NAICS code 326291, which corresponds to other plastic product manufacturing, indicating the artificial turf will be custom-manufactured or sourced to meet technical specifications. The place of performance is clearly identified as Memorial Road in Somerville, Massachusetts, with a ZIP code of 02152, confirming the location where the turf will be installed and used. The solicitation was posted on July 29, 2026, with a response deadline of August 27, 2026, allowing interested vendors a four-week window to submit proposals. The contracting entity is the SHA05 - Somerville Housing Authority, operating under the Massachusetts state infrastructure, and while no point of contact or set-aside details are provided, the focus remains solely on delivering the specified quantity of turf material that satisfies performance, safety, and installation criteria for public recreational spaces. The contract does not include installation services, suggesting the supplier’s responsibility ends with delivery of compliant materials.
SHA05 - Somerville Housing Authority

POSTED

3 days ago

DEADLINE

in 26 days
View Details
NAICS: 326291
New
International
Sustainable and Compostable Serviceware Supply
Department of National Defence

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 326291
New
DIBBS
WEATHER STRIP
Solicitation # SPE8E6-26-T-3901
The contract pertains to the procurement of one unit of weather strip identified by NSN 5640-01-482-5044 under solicitation number SPE8E6-26-T-3901, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 10 days of award, and the place of performance is Fort Stewart, Georgia, with a response deadline of August 10, 2026. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed via the official DLA website; the applicable revision depends on whether the acquisition is simplified or large, with controls tied to the solicitation or award date unless amended. The contract also includes DLA Packaging Requirements and addresses the handling of covered defense information, while mandating removal of government identification from non-accepted supplies. The primary point of contact is Vincent Nader, reachable by phone or email for inquiries regarding the procurement.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 326291
New
Federal
Artificial Turf Supply and DeliveryThe contract entails the supply and delivery of new artificial turf and associated logo components to Dagger Field at Fort Bliss, with all materials required to meet rigorous military durability and safety standards. The work is scoped as a subcontract under a Total Small Business Set-Aside, ensuring eligibility exclusively for small businesses as defined by the SBA pursuant to FAR 19.5, and falls under NAICS code 326291 for other rubber product manufacturing. Performance is mandated at Fort Bliss, with a zip code of 79916, and the contracting activity is managed by the Department of Defense through W6QM Micc-Ft Bliss. The opportunity was posted on July 27, 2026, with a firm deadline for responses set for August 21, 2026, at 4:00 PM, providing potential vendors a four-week window to prepare and submit proposals. All delivered products must align with federal specifications for high-traffic, high-impact military applications, ensuring long-term performance under extreme environmental and operational conditions.
W6QM Micc-Ft Bliss

POSTED

4 days ago

DEADLINE

in 21 days
View Details
NAICS: 326291
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-287J
This contract covers the procurement of a nonmetallic hose assembly identified by NSN 4720-01-599-2734 and part number 04-21439-21, with a requirement for 93 units to be delivered within 165 days under solicitation SPE7M4-26-T-287J. The item is designated as a critical application with a non-extendable shelf life of 120 months and must comply with Type I (Code W) specifications as defined in the DLA Master List of Technical and Quality Requirements. Ozone-depleting chemicals are strictly prohibited in any component or manufacturing process, and any substitutions must be pre-approved unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with marking in accordance with MIL-STD-129 including special code 32 for Type I shelf-life tracking. All items are subject to inspection and acceptance at origin, with no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must follow DLA procedural notes C19 and C20. The contract operates under full and open competition, with configuration change management and variance requests governed by specific DLA requirements. The required delivery date is January 30, 2027, with a need ship date of January 19, 2027.
FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326291
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-876E
The contract specifies the procurement of 30 O-rings, part number D-3460006, with NSN 5331-01-230-4601, for delivery within 20 days of award. The items must comply with DLA Packaging Requirements for Procurement and incorporate all technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. The supplier, Warren Controls Corp, is prohibited from using any asbestos as defined in FED-STD-313 and must ensure no intentional addition of mercury or mercury-containing compounds comes into direct contact with the hardware, except for functional uses in specified categories such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The contract is issued under solicitation SPE7L1-26-T-876E by the Department of Defense’s Land Supply Chain, with performance required at Fort Irwin, California, 92310-9986. The point of contact is Kristina Derry, and responses must be submitted by August 6, 2026, under the NAICS code 339991 for other miscellaneous manufacturing.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326291
Federal
Ancillary Supplies and Packaging MaterialsThe contract involves the supply of medical-grade vials, syringes, lead pots, labels, and tamper-evident packaging specifically designed for the safe handling and delivery of radiopharmaceuticals. These items are critical for ensuring radiation safety, regulatory compliance, and product integrity throughout the logistics chain, from preparation to patient administration. All materials must meet stringent quality and sterility standards appropriate for use in nuclear medicine environments. This is a subcontract under the Department of Veterans Affairs, managed by the 256-NETWORK Contract Office 16, with performance required in New Orleans, Louisiana, at the zip code 70119. The solicitation was posted on July 24, 2026, and responses are due by August 8, 2026, at 7:00 PM. The NAICS code 326291 indicates the procurement is classified under other plastic product manufacturing, aligning with the production of specialized medical packaging. There is no set-aside designation specified, and while no point of contact is listed, interested parties must respond through the official SAM.gov portal before the deadline.
256-NETWORK Contract Office 16 (36C256)

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 326291
SLED
Supply of Vinyl (PVC) Hospital Grade Disposable GlovesThe Texas Department of Criminal Justice is seeking a subcontractor to provide an ongoing supply of hospital-grade vinyl (PVC) disposable gloves to its facilities throughout Texas. The gloves must meet stringent quality standards, including consistent material properties, sterility, and compliance with medical-grade specifications to ensure safety and performance in high-risk environments. Delivery schedules are critical, requiring reliable and timely logistics to maintain uninterrupted supply across all correctional facilities. The contract is classified under NAICS code 326291, indicating it pertains to other plastic product manufacturing, and is intended for long-term procurement to support daily operations within the state’s prison system. Bidders must respond by the specified deadline of August 14, 2026, with proposals evaluated based on product compliance, operational reliability, and the ability to sustain uninterrupted service.
Texas Department of Criminal Justice

POSTED

8 days ago

DEADLINE

in 14 days
View Details
NAICS: 326291
DIBBS
Supplier of Nonmetallic Seals (NSN: 5330-01-440-0948)The contract requires the supply of 102 units of a nonmetallic, specially shaped seal identified by NSN 5330-01-440-0948, which must fully comply with all technical and quality standards set by the Defense Logistics Agency. The seal must be manufactured to precise specifications and packaged in accordance with military packaging guidelines to ensure safe and secure transit. Delivery must adhere to established Department of Defense protocols, including proper labeling and documentation to meet logistical and inspection requirements. The place of performance is designated as Jacksonville, Florida, with the product intended for use under the Land Supplier Operations Vehicle Support program. The solicitation is structured as a subcontract under NAICS code 326291, which classifies it under other plastic product manufacturing. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026. While the solicitation number and point of contact details are not provided, interested parties can access the full solicitation through the DIBBS system using the provided link. The contract does not specify a set-aside classification, indicating it is open to all eligible suppliers, and the overseeing agency is the Department of Defense through its Land Supplier Operations Vehicle Support office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 326291
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-125U
This contract pertains to the procurement of preformed packing items under solicitation SPE7L3-26-T-125U, with a requirement for 445 units of NSN 5330-00-049-8014 to be delivered within 77 days to the government depot in New Cumberland, PA. The item must comply with stringent packaging standards, including enclosure in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the vulnerability of associated federal supply class numbers to UV degradation. A mandatory shelf-life provision requires that 31 months of the 36-month total shelf life remain at time of delivery, with no extensions permitted, and all items must be free of asbestos. Additionally, mercury and mercury-containing compounds are strictly prohibited from direct contact with the supplied items, except for functional applications in batteries, fluorescent lights, instruments, sensors, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The contract enforces MIL-STD-130N for identification marking, mandates the removal of government identification from non-accepted supplies, and applies Covered Defense Information protocols. The vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 326291
DIBBS
SEA L, NONMETALLIC SP
Solicitation # SPE7L3-26-T-131K
This contract pertains to the procurement of a nonmetallic, specially shaped seal with NSN 5330-01-440-0948, requiring a quantity of 102 units for delivery within 168 days after order. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the contract involves covered defense information subject to strict handling protocols. The seal’s associated technical data is subject to export controls under ITAR or EAR, prohibiting any transfer to foreign persons without prior authorization from the Department of State or Commerce, and applies to all entities including foreign subsidiaries of U.S. firms. Only DLA contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access the controlled data. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed. The solicitation is issued under SPE7L3-26-T-131K, with a response deadline of August 3, 2026, and is administered by the Department of Defense through the Land Supplier Operations Vehicle Support office, with delivery performance specified in Jacksonville, Florida.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

8 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.
Administrative Management and General Management Consulting Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.
Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.
Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.
Other Warehousing and Storage

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
DIBBS
Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-897Q
The contract specifies the procurement of 40 solid plain aluminum alloy disks, each with a nominal diameter of 11.000 inches and a thickness of 0.050 inches, manufactured to ASTM B209/B209M Revision A dated 12/01/2021 using aluminum alloy 1100. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and must conform to current revision specifications unless previously accepted versions are referenced under grandfathering provisions. The material must not contain any Class I ozone-depleting chemicals, and any substitutes require prior approval. Packaging and marking must follow DLA Packaging Requirements RP001 and MIL-STD-129, with hazardous material packaging governed by IP025 and Fed-Std-313; non-hazardous items require commercial packaging per ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless specified otherwise, and attributes are assigned verification levels or AQLs based on criticality. The item is identified by NSN 5340-01-343-8698 and purchase request 7017696212, with a unit price of $40.00 per piece for a total price of $1,600. The delivery schedule requires shipment within 100 days of contract award with FOB origin terms, and goods must be delivered to the designated DLA Distribution facility in New Cumberland, PA, with a specified need date of November 19, 2026. No quantity variance is permitted. Inspection and acceptance occur at the destination. All packaging must be palletized according to RP001, and labeling and marking must align strictly with DLA and military standards. The solicitation is open to full and fair competition under NAICS code 332510, with responses due by August 10, 2026, and technical oversight managed by the Department of Defense through the Land Supply Chain organization.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-900R
This contract is for the procurement of a replacement cover identified by NSN 5340017328379 and part number TA486-RC-1841, with a quantity of 66 units to be delivered FOB origin within 151 days of contract award. The item is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization. Marking must follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA guidelines. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for both freight shipping and parcel post. The contract imposes a strict prohibition on the use of Class I ozone-depleting chemicals, overriding but not relaxing any product specifications, and any substitute chemicals require prior approval. The unit price is $66.00 per unit, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The procurement is governed by DLA procedures for transportation and freight, and all references to units of issue must align with ANSI X12 standards. The solicitation was issued on July 30, 2026, with a response deadline of August 10, 2026, and the original required delivery date is January 9, 2027.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L1-26-T-892J
The contract is for the procurement of 15 units of a groove pulley with NSN 3020-01-610-4492 and part number 1817891C1, issued under solicitation SPE7L1-26-T-892J by the Department of Defense’s Land Supply Chain. The item must be delivered within 20 days of contract award to the Government of Jordan, specifically to GHQ Jordan Armed Forces in Amman, with delivery terms set as FOB origin and no variance allowed in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with packaging and marking strictly compliant with MIL-STD-2073-1E and MIL-STD-129, including specified packaging methods, materials, and unit container codes. The pulley is to be palletized in accordance with DLA packaging requirements and marked without special identification codes. The buyer is identified as NAVISTAR INTL CORP TRUCK BR OHIO, and the freight forwarder is Serra International Inc in Newark, New Jersey. The original required delivery date is August 4, 2026, and the contract is governed by DLA procedures with inspection and acceptance occurring at origin. All administrative data, including point of contact Kristina Derry and the DIBBS solicitation link, are included for official tracking and compliance.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-896W
The contract is for the procurement of two O-rings, identified by NSN 5331-01-122-3037, under solicitation SPE7L1-26-T-896W, with a response deadline of August 10, 2026, and a required delivery date 73 days after award. The items must comply with DLA Packaging Requirements for Procurement and incorporate all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the nature of the acquisition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. The items must be free of asbestos, and any alternative materials must be approved in accordance with Clause L30 and Provision 4 conditions. Documentation for source approval is required, and covered defense information may apply. The place of performance is Tracy, California, and the point of contact is Kelly Day at the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
DIFFUSER ASSEMBLY
Solicitation # SPE7L1-26-T-896P
The contract pertains to the procurement of eight diffuser assemblies with NSN 1005-01-029-9255 under solicitation SPE7L1-26-T-896P, with delivery required within 359 days after order. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The supplier must comply with DLA packaging standards and is obligated to adhere to export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons regardless of location, with compliance contingent upon prior approval from the Department of State or Commerce. Only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export-controlled data training and approved by DLA, may access the controlled technical data. Additionally, the contractor must be a CMMC Level 2 certified third-party assessment organization, and all measuring and test equipment used must meet specified standards. The contract is governed by DFARS 252.225-7048 and includes requirements for demilitarization of Category I munitions items, and specialized quality controls applicable to both manufacturers and non-manufacturers. The point of contact for inquiries is Zane Zwayer, and performance is designated to occur in Tracy, California, with the solicitation closing on August 10, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7L1-26-T-899J
The contract is for the procurement of three protective dust caps with NSN 5340-01-565-6757 and part number 800-0052, issued under solicitation SPE7L1-26-T-899J by the Department of Defense’s Land Supply Chain. The unit price is $3.00 per unit for a total value of $9.00, with delivery required FOB origin within 215 days of contract award. The items must be delivered to the designated receiving warehouse in Tracy, California, and are subject to inspection and acceptance at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous items must be commercially packaged according to ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must conform to RP001 DLA packaging standards. The contractor must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and ensure all government identification is removed from non-accepted supplies in accordance with MIL-STD-130N. The contract includes strict quantity controls with zero variance tolerance and requires compliance with all referenced DLA operational and logistical directives, including transportation and shipping procedures outlined in DLAD PROC NOTES C19 and C20.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-897U
The contract pertains to the procurement of 15 protective dust and moisture seal plugs with NSN 5340-01-434-1353, issued under solicitation SPE7L1-26-T-897U by the Defense Logistics Agency through the Land Supply Chain organization. Delivery is required within 290 days from award, with responses due by August 10, 2026, and the solicitation opened on July 30, 2026. The item is subject to full and open competition under NAICS code 332510, and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must comply with prohibitions against Class I ozone-depleting chemicals, and any substitutes require prior approval unless explicitly authorized. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, necessitating prior authorization for any export or disclosure to foreign persons, including foreign nationals within the U.S., with DFARS 252.225-7048 enforcing compliance. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The place of performance is identified as New Cumberland, Pennsylvania, 17070-5002, with Isabelle Szulewska listed as the primary point of contact.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details