Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CHAIN, WELDLESS

Active
SPE4A5-26-T-328ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a weldless chain identified by part number NAS1455A00-6 and NSN 4010-00-855-8313, with a requirement for one unit to be delivered within 20 days from the order date. The item is classified as a critical application item with no shelf life requirement and must comply with Technical Data Package Rev A Gen 1 per NAS1455 Revision 2 dated 09/19/2014, as well as referenced standards including RR-C-271H and drawing 13873. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including RQ001 for tailored quality requirements, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 under zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 but is subordinate to DLA Master List requirements and must be labeled per MIL-STD-129, with palletization following RP001 guidelines. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at origin. Cybersecurity requirements include CMMC Level 2 self-assessment compliance under DFARS 252.211-7003(c)(1)(i), and covered defense information provisions apply. The item must be shipped by traceable means only—parcel post is prohibited—and delivered to Fairchild AFB, WA. The contract was issued under solicitation SPE4A5-26-T-328Z with a response deadline of August 12, 2026, and the original required delivery date is March 19, 2026.

General Info

One NAS1455A00-6 weldless chain, FOB origin, due March 19, 2026, CMMC Level 2, traceable shipping, Fairchild AFB, WA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

400 S GATE 35 RD, FAIRCHILD AFB, WA, 99011-9685, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-328Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHAIN,WELDLESS
CHAIN, WELDLESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1455 REVISION NR 2 DTD 09/19/2014
SPE4A5-26-T-328Z
SECTION B
PART PIECE NUMBER: NAS1455A00-6
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 13873 NAS1455 REVISION NR DTD 10/23/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK RR-C-271H(1) REVISION NR H DTD 01/03/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017690318 0001 EA 1.000
NSN/MATERIAL:4010008558313
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4620
FB4620 92 LRS LGRDDC
AF NOMILBILLS PROC CP 509 247 5811
400 S GATE 35 RD
FAIRCHILD AFB WA 99011-9685
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE4A5-26-T-328Z
SECTION B
PR: 7017690318 PRLI: 0001 CONT’D
FB4620
FB4620 92 LRS LGRDDC
AF NOMILBILLS PROC CP 5092475811
400 S GATE 35 RD
FAIRCHILD AFB WA 99011
US
M/F: (TCN) FB462060730220
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:03/19/2026
SPE4A5-26-T-328Z NSN/Part Number: 4010-00-855-8313 Quantity: 1 EA Purchase Request: 7017690318QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12JP
The contract pertains to the procurement of four quick-release pins with NSN 5315-01-575-1529 under solicitation SPE4A6-26-T-12JP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of contract award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements. The items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the U.S. Coast Guard Station Cape Cod Canal in Sandwich, Massachusetts, with specific freight and parcel post identifiers provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List, and the supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance. The unit price is $4.00 per item, totaling $16.00, and the required delivery date is July 29, 2026. Supplier identification codes include McMaster-Carr Supply Company (07BY4) and QRP Inc (09094) with respective part numbers 93750A303 and QRP2C040.75L12A4. Government use codes and project identifiers are included for internal tracking.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-12BV
The contract specifies the procurement of 58 units of a PIN, STRAIGHT, HEADED component identified by NSN 5315-01-519-1840 and part number 2CX715, under solicitation SPE4A6-26-T-12BV. The unit price is $58.00 per EA, totaling $3,364.00, with delivery required FOB origin in 171 days, and the original delivery date was December 5, 2026, with a needed ship date of January 31, 2027. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at the destination, and the item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA Packaging Requirements for Procurement (RP001), with the Unit of Issue and Quantity per Unit Pack as specified. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The component is subject to government identification removal upon non-acceptance per RQ011, and the solicitation falls under NAICS code 332618 with the contracting office under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-12EF
The item is a PIN, RETAINING with NSN 5315-01-611-3540, for a quantity of 116 units, under purchase request 7017740108, with a delivery requirement of 171 days after delivery order. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of the data to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign nationals employed by U.S. companies or their subsidiaries, and compliance with DFARS 252.225-7048 is mandatory. Access to the controlled technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire, with approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-12EF, posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 332618. The contracting activity is the ASC Commodities Division of the Department of Defense, with the place of performance in Tracy, California, 95304-5000, and primary point of contact is Samantha Hopkins, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-12CR
The contract specifies the procurement of 14 grooved, headless pins identified by NSN 5315-01-656-9036 and part number 930030, with a unit price of $14.00 and a total contract value of $196.00. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA’s RP001 packaging requirements, with palletization following specified guidelines. The unit of issue is each (EA), and the quantity variance is strictly zero percent. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the items must be delivered within 171 days from the contract date. The required delivery date is February 16, 2027, with a needed ship date of January 31, 2027. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was issued under contract SPE4A6-26-T-12CR, with a response deadline of August 12, 2026, and the contracting office is the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLESS
Solicitation # SPE4A6-26-T-12MP
The contract specifies the procurement of 273 units of PIN SHOULDER HEADLESS with NSN 5315-01-177-9226 under solicitation SPE4A6-26-T-12MP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, and responses must be submitted by August 12, 2026. The acquisition is subject to the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers incorporated by reference. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA standards, and inspection and acceptance occur at the manufacturer’s origin. Non-accepted supplies must have government identification removed, and all items require physical identification or bare item marking. Technical data associated with this item is controlled under ITAR or EAR, restricting disclosure to foreign persons—both inside and outside the U.S.—and mandates adherence to DFARS 252.225-7048. Access to export-controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DOD export control training and received DLA approval. The place of performance is Anniston, Alabama, with Susan Barlow designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-322A
The contract specifies the procurement of wire rope conforming to stringent technical and quality standards under the DLA Master List of Technical and Quality Requirements. The product is improved plow steel, uncoated, with a one-inch diameter, right regular lay construction, IWRC, and preformed, delivered in reels of 850 feet each. Five reels are required, with no tolerance for quantity variance. Each reel must be packaged in accordance with ASTM D3951, but DLA requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. The item is classified as a critical application, requiring compliance with the tailored higher-level contract quality requirements referenced in TDP Rev A Gen 1 per RR-W-410J Revision J dated January 3, 2022. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and inspection and acceptance occur at destination. The item carries NSN 4010-01-089-9234 and is to be delivered FOB origin to DLA San Joaquin in Tracy, California, by January 31, 2027, with an original required delivery date of November 15, 2026. Palletization must comply with DLA packaging requirements, and transportation is governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-322A, with primary point of contact Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A5-26-T-325R
The contract specifies the procurement of 24 straight headed pins with NSN 5315-01-707-7833 under solicitation SPE4A5-26-T-325R, with delivery required to DLA Distribution in San Diego within 171 days of award. All items must comply with strict technical and quality requirements referenced through R-numbers in the DLA Master List, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and adherence to DLA packaging and transportation guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under a zero-based sampling plan unless otherwise defined, and verification levels are fixed at VII, IV, and II for critical, major, and minor attributes respectively. The manufacturer must hold and self-assess Cybersecurity Maturity Model Certification Level 2 and conform to SAE AS9100 for quality systems. Unit of issue is each (EA), with no variance allowed in quantity, and delivery is FOB origin. Special marking is not required, and palletization must follow DLA packaging standards. The contract includes detailed freight and shipping instructions, with an original required delivery date of March 27, 2028, despite a need ship date of January 31, 2027, indicating potential scheduling flexibility. The contracting office is the Department of Defense under the ASC Supplier Oper OEM Division, with point of contact Yvonne Jackson-Dias.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK, DETENT
Solicitation # SPE4A6-26-T-12CW
The contract pertains to the procurement of 15 units of PIN, LOCK, DETENT with NSN 5315-01-657-2337 under solicitation SPE4A6-26-T-12CW, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline is set at 171 days after order, with performance to occur at New Cumberland, Pennsylvania, zip 17070-5002. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 332618. The primary point of contact is Paul Askew, reachable at paul.askew@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-328F
The contract is for a weldless sash chain, specified as type 2, class 3, with a material size of 0.050, delivered in 100-foot units per box, each box having a minimum breaking strength of 650 pounds. The chain is to be bronze, self-colored, and packaged in accordance with ASTM D3951 and MIL-STD-129, with all packaging and labeling strictly following DLA’s master requirements, which override any conflicting standards. The unit of issue is BX, with a quantity of one box and a delivery window of ten days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for variance in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformities unless otherwise stated. Attributes are assigned verification levels or AQLs as specified, with unspecified attributes treated as major. Physical identification of the item must conform to RQ017 and the referenced technical data package revision H dated January 3, 2022. Shipping must use the fastest traceable method excluding parcel post to the designated delivery point at Fort Hood, Texas, with detailed markings and the military freight control number provided. The contract is issued under solicitation SPE4A5-26-T-328F with NSN 4010-00-186-9411, and the required delivery date is July 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12AV
The contract is for the procurement of 389 units of a QUICK RELEASE PIN with NSN 5315-01-567-8633 under solicitation SPE4A6-26-T-12AV, issued by the DLA Commodity Division under the Department of Defense. The requirement is fully competitive and governed by military or federal specifications, with manufacturing must adhere to the current revision of the applicable part standard; previous revisions are acceptable only for hardware produced prior to the solicitation date. All delivered items must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, while unspecified attributes are deemed major. The product must be delivered within 112 days of award to the place of performance in New Cumberland, PA, with the solicitation opening on August 4, 2026, and responses due by August 12, 2026. Government identification must be removed from non-accepted supplies, and the primary point of contact is Michael Jefferson, reachable at the provided DLA email and phone number.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-612U
The contract pertains to the procurement of 43 quick release pins with NSN 5315-01-566-8446 under solicitation SPE4A7-26-T-612U, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 171 days after order placement, and responses must be submitted by August 12, 2026. The specification incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which control based on the solicitation issue date for simplified acquisitions or the RFP issuance date for larger procurements, with amendments overriding earlier revisions. All supplies must comply with MIL-STD-1916 or ASQ H1331 Table 1 sampling protocols unless otherwise directed, with zero non-conformances required in sampled lots unless specified otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Covered Defense Information applies, and non-accepted supplies must have all government identification removed prior to return. The place of performance is New Cumberland, PA, 17070-5002, with Brad Ingram as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details