Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CHAIR, PATIENT TRANS

Closed
SPE2DH-26-T-2840Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The contract outlines the procurement of a patient transport chair constructed from lightweight aluminum, designed with oversized wheels that include dual rear wheel locks and 4-inch front caster wheels for ease of movement and stability. The chair features an extendable upper control handle, stair treads, and comes with a patient restraint set comprising two cross-chest restraints and one ankle restraint. It supports a patient weight capacity of up to 500 pounds, weighs 31.5 pounds itself, and has dimensions of 37.5 inches in height, 20.5 inches in width, and 28 inches in depth, with a folded depth of 8 inches. Each unit is issued individually and must be packaged commercially to ensure protection against damage during transport. The packaging requirements emphasize proper sealing, suitable commercial exterior containers, and compliance with Medical Marking Standard No. 1, ensuring safe delivery and acceptance by carriers at the lowest possible rate. This contract also incorporates specific technical and quality requirements referenced in the DLA master list, with certain clauses related to packaging, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is managed by the Department of Defense’s Medical Supply Chain with delivery expected within 20 days of order, and includes a request for bidders to specify the source and part number when submitting proposals. The designated point of contact is Tina Vu.

General Info

Procurement of lightweight aluminum patient transport chair with restraints, oversized wheels, and secure commercial packaging.

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

UNIT 100507 BOX 1, FPO, AP, 96683, USA

Set-Aside

NONE

Documents

1

SPE2DH-26-T-2840.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA

Full Description

Show more
CHAIR,PATIENT TRANS
CHAIR,PATIENT TRANSPORT
MADE OF LIGHTWEIGHT ALUMINUM; OVERSIZED WHEELS WITH DUAL REAR WHEEL
LOCKS AND 4IN FRONT CASTER WHEELS; EXTENDABLE UPPER CONTROL HANDLE AND
STAIR TREADS; PATIENT RESTRAINT SET INCLUDES TWO CROSS-CHEST RESTRAINTS
AND ONE ANKLE RESTRAINT; PATIENT WEIGHT CAPACITY: 500 POUNDS; CHAIR
WEIGHT, 31.5 POUNDS; DIMENTIONS, 37.5 IN H X 20.5IN W X 28IN D (OLDED
DEPTH: 8IN);
UNIT OF ISSUE EA(EACH)
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
SPE2DH-26-T-2840
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-652-7812 Quantity: 1 EA Purchase Request: 7016169762QTY: 1 Delivery: 20 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROS
Solicitation # SPE2DH-27-T-0287
Solicitation SPE2DH-27-T-0287 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscopy mounting medium, identified by NSN 6640-00-935-1485. The required material is a synthetic resin with a 60 percent solution of toluene or xylene, featuring a 1.52 refractive index when dry and a one-hour setting time. The unit of issue is a one-ounce bottle, which must have a shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery. Delivery is required within 69 days after order, with the destination specified as the USA Med Materiel Ctr Kore. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Labels must include the NSN, manufacturer and CAGE code, contract or lot number, and relevant dates of manufacture or expiration. Because the material is hazardous, the contractor must comply with 49 CFR, 29 CFR, and the Hazard Communication Standard, providing a signed certification of package configuration on the DD Form 250. Additionally, the contract incorporates cybersecurity requirements via DFARS 252.204-7012 and requires the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations by November 3, 2026, and provide a complete data package if proposing alternate parts.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS