Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CHANNEL, STRUCTURAL

Active
SPE8E4-26-T-1982Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of structural aluminum channels made from 6061 aluminum alloy in T6 or T6511 temper, with a width of 4.0 inches, height of 1.647 inches, thickness of 0.180 inches, and a weight of 2.210 pounds per foot. Lengths must be between 20 and 30 feet and delivered in whole-foot increments only. The profile must conform to specific die numbers from approved manufacturers including Alcoa, Tiernay, Kaiser, and Reynolds. Material must meet stringent quality standards defined by ASTM B666/B666M-20, SAE AMS-QQ-A-200/8A, and SAE AMS-QQ-A-200C, and suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible. Every shipment requires a Certificate of Quality Compliance, along with continuous identification markings on each unit that include the DLA contract number, NSN, specification revision, alloy, temper, die number, manufacturer, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling using non-contaminating fluids. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines with preservation per ASTM B660 and palletization per DLA requirements. A minimum of 50 feet is required, with a 10% variance allowed, and delivery is FOB origin with inspection and acceptance at destination. The product is classified as a critical application item, and failure to comply with any requirement, particularly regarding supplier qualification or marking, may result in rejection or criminal penalties. The delivery deadline is 83 days from award, with an original required delivery date of September 9, 2026, and the final ship date set for November 9, 2026, to DLA District San Joaquin in Tracy, California.

General Info

Procure 6061-T6 aluminum channels 4x1.647x0.180 in, 20–30 ft, marked per specs, FOB origin, deliver by Nov 9, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-1982 for DLA Troop Support Metals

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Denise Boyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHANNEL,STRUCTURAL
STRUCTURAL CHANNEL
ALUMINUM ALLOY 6061 / T6 OR T6511
4.0 IN W
20-30 FT LG
1.647 IN H
0.180 IN THK
2.210 LB/FT
THE FOLLOWING DIE NUMBERS OR EQUAL
ALCOA (01634) DIE 852G
TIERNAY (29321) DIE 60-292
KAISER (81684) DIE HC12
REYNOLDS (77783) DIE 2644
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
SPE8E4-26-T-1982
SECTION B
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS4150P REVISION NR P DTD 03/01/2024
SPE8E4-26-T-1982
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200/8A REVISION NR A DTD 05/01/2015 PART PIECE NUMBER: ALLOY 6061 TEMPERS T6 OR T6511
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200C REVISION NR C DTD 11/01/2019 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016769081 0001 FT 50.000
NSN/MATERIAL:9540001979866
DELIVERY (IN DAYS):0083
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
SPE8E4-26-T-1982
SECTION B
PR: 7016769081 PRLI: 0001 CONT’D
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:11/09/2026 Original Required Delivery Date:09/09/2026
SPE8E4-26-T-1982 NSN/Part Number: 9540-00-197-9866 Quantity: 50 FT Purchase Request: 7016769081QTY: 50 Delivery: 83 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Machined Mounting Plate SupplyThe contract requires the manufacture and delivery of 30 precision-machined mounting plates in full compliance with military specifications covering material composition, dimensional tolerances, and mandatory marking requirements. All units must meet strict quality and performance standards dictated by defense industry norms to ensure interoperability and reliability in military vehicle systems. The work is classified as a subcontract under NAICS code 332112 and is being procured by the Department of Defense through its Land Supplier Operations Vehicle Support division. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 5, 2026. The place of performance and point of contact details are not specified, but all deliveries and compliance certifications are expected to align with federal defense contracting protocols and traceability requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Pressure Switch Supply (NSN 5930-00-192-4507)The contract solicits the supply of five pressure switches identified by NSN 5930-00-192-4507, distributed across two contract line items, with delivery required to Fort Eustis, Virginia, under the procurement authority of the Department of Defense’s Electrical Devices Division. All items must strictly adhere to DLA technical standards, and contractors are obligated to submit a comprehensive data package if proposing any alternate parts in lieu of the specified NSN. The solicitation, posted on August 5, 2026, closes for responses on August 17, 2026, and is classified as a subcontract under NAICS code 332112, indicating manufacturing of electrical equipment and wiring supplies. No set-aside designation or point of contact information is provided, and the procurement is conducted through the DIBBS platform with the reference number SPE7M826T5710.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13BN
The contract pertains to the procurement of 814 units of a machine bolt identified by NSN 5306-00-462-4317, classified as a commercial item and governed by established military or consensus non-government standards. The hardware must be manufactured to the current revision of the defining standard, with prior revisions still acceptable if they were current at the time of manufacture. Item Unique Identification is explicitly not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List, and packaging must comply with DLA specifications. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. Measuring and test equipment standards are applicable, and physical identification of the bare item is required. The solicitation, issued under number SPE4A6-26-T-13BN, was posted on August 5, 2026, with responses due by August 13, 2026, and delivery is required within 156 days after order. The acquisition is fully competitive, under NAICS code 332112, managed by the Department of Defense’s ASC Commodities Division, with performance to be delivered to Tracy, California, 95304-5000. Primary point of contact is Priscilla Holmes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13NJ
The contract specifies the procurement of 209 machine bolts identified by NSN 5306-01-377-1546 and part number 12418102, manufactured to the current revision of a recognized military or consensus non-government part standard, with past revisions also acceptable if they were current at the time of manufacture. The item is classified as a commercial item and is designated as a critical application component requiring strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. Configuration control, engineering change proposals, and variance requests are governed by specific DLA protocols including RQ002 and RQ017 for physical marking and removal of government identification from non-accepted items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization following DLA packaging standards. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery date is August 5, 2026, with a 182-day lead time. The item must be shipped to the DLA Distribution Center in New Cumberland, PA, and the contractor must comply with all applicable Defense Logistics Agency procedures, including proper unit of issue and transportation guidelines. Certification of conformance is authorized unless overridden by a quality assurance letter of instruction.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-2010
The contract specifies the procurement of structural beams made from aluminum alloy 7075/T-6511 with dimensions of 2.250 inches in height, 3.50 inches in width, and 0.156 inches in thickness, supplied in whole-foot lengths between 10 and 12 feet, weighing approximately 1.050 pounds per foot. All material must comply with technical and quality standards referenced in the DLA Master List, including certification requirements such as a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, and mandatory continuous markings on every unit that include the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are required for smaller bars and tubes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and marking must conform to MIL-STD-129, with shipment labels including both units of measure if applicable. The material must be sourced exclusively from suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an unauthorized substitution with potential criminal and civil penalties. The contract includes two line items totaling 17,160 feet—80 feet for delivery to Cherry Point, North Carolina, and 17,080 feet to Jacksonville, Florida—with a 42-day delivery window, a 10% quantity variance allowance, and FOB origin terms. Inspection and acceptance occur at the destination, and metal certification documentation must be submitted to the DLA Troop Support Contracting Officer. The solicitation is a HUBZone set-aside under NAICS code 332112, with response deadlines and technical data package references aligned to standards including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, and NAS344.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
STRUCTURAL SECTION,
Solicitation # SPE8E4-26-T-1962
The contract specifies the procurement of 31 units of a structural section made from 6061 aluminum alloy in T4 temper, extruded to a length of 12 feet with part number BAC1520-606 and national stock number 9540-01-482-2307. Each part must be marked per MIL-STD-130 with the NSN, part number, current design authority code 98748, actual manufacturer’s cage code, date of manufacture, and the phrase “FOR MILITARY USE ONLY,” explicitly prohibiting the use of Boeing’s original cage code. Packaging must comply with DLA’s RP001 requirements, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals in the U.S., with DFARS 252.225-7048 enforcing compliance. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed required DLA training and questionnaire, and have received formal approval. Delivery is due 167 days after award under solicitation SPE8E4-26-T-1962, issued by the Department of Defense through Depot Oklahoma at Tinker AFB, with responses due by August 17, 2026, and primary point of contact Pamela Duffey.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-13CA
The contract is for the procurement of 230 machine screws with the NSN/Part Number 5305-00-551-6444, issued under solicitation SPE4A6-26-T-13CA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 80 days after delivery order, and responses must be submitted by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to several DLA-specific requirements including packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and strict export controls. Technical data associated with this item is classified under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the U.S. Contractors must possess a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training and questionnaire, and have received explicit approval from DLA to access the controlled data. The place of performance is Tinker Air Force Base, Oklahoma, and the primary point of contact is Nyjel Knowlin, reachable via email at nyjel.knowlin@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-13KL
The contract pertains to the procurement of hexagon head cap screws, identified by NSN 5305013308496 and part number 12414475-113, under solicitation SPE4A6-26-T-13KL, with a total quantity of 87 packaging units, each containing 50 screws, effective March 1, 2023. The item is designated as a critical application item and must conform to Technical Data Package Revision A Generation 3, aligned with multiple reference drawings dated between 2011 and 2026. All supplies must comply with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, incorporated by reference. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is PG and delivery is FOB origin within 37 days. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129, with no special marking required. Palletization must meet DLA packaging standards. The contract is issued by the Department of Defense, ASC Commodities Division, with performance to be conducted in New Cumberland, PA.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-53F2
The contract pertains to the procurement of eight hexagon head cap screws identified by NSN 5305-01-377-3717, with a delivery requirement of 171 days after award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all items must be marked in accordance with MIL-STD-130N for U.S. military property identification. Non-accepted supplies must have government identification removed as directed, and each screw must be physically marked according to the bare item marking standard. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are classified with stringent verification levels or AQLs. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for specific functional components, and any permitted mercury-containing items must include shockproof design and secondary containment as per NAVSEA guidelines. The solicitation number is SPE4A6-26-T-53F2, issued on August 5, 2026, with responses due by August 10, 2026, under the NAICS code 332112, and performance is designated for Tracy, CA, with Myonka Boyd listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10DR
The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2015
This contract specifies the procurement of extruded aluminum alloy bars made from 6061 in the T6511 temper condition, with a diameter of 1.500 inches and a total length of 12 feet per bar, weighing approximately 2.080 pounds per foot. The material must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and must comply with multiple specifications including SAE AMS-QQ-A-200/8A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to the DLA Troop Support Contracting Officer. Each bar must be continuously marked with the DLA contract order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or stamping, ensuring legibility and durability without contamination. All bars must be supplied in whole-foot increments within the specified length tolerance. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and only approved QSLD distributors are eligible for award unless a formal deviation is declared. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may result in criminal penalties. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with labeling fully conforming to MIL-STD-129, including special marking code ZZ for preservation and marking. Palletization follows DLA packaging requirements. The contract specifies delivery of 298 feet to Tinker AFB, Oklahoma, under FOB origin terms with a 10% variance allowance, inspection and acceptance at destination, and an original delivery deadline of January 9, 2027, with a required ship date of January 18, 2027. This item is designated as a critical application item, and all documentation, including CDRL-METALSCERT, must be provided as required under the contract data requirements list.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and WAWF Submission ServicesThe contract requires the preparation and timely submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in full compliance with DFARS 252.232-7003, covering both fixed-price and cost-type contract line items. This obligation ensures accurate, secure, and standardized digital documentation aligned with Department of Defense financial and procurement standards. The work is to be performed in Tracy, California, with a zip code of 95304-5000, and falls under a Total Small Business Set-Aside as defined by FAR 19.5, reserving the opportunity exclusively for small businesses certified by the SBA. The NAICS code 541511 indicates this is an information technology services contract, specifically focused on custom computer programming services related to invoice and reporting automation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the DLA San Joaquin office, part of the Department of Defense procurement network.
Custom Computer Programming Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Specialty Item Supply: Controller, Special (NSN 4510251497100)The contract awards the supply of 28 units of CONTROLLER, SPECIAL with NSN 4510251497100 at a unit price of $28.00, requiring full compliance with packaging, labeling, and delivery specifications to Tracy, CA, with a zip code of 95304-5000. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code is 334511, indicating the industry category tied to the manufacturing of navigational, Measuring, Electromedical, and Control Instruments. The solicitation was posted on August 5, 2026, with all responses due by August 17, 2026, and the awarding agency is DLA DIST SAN JOAQUIN under the Department of Defense, with performance obligations centered exclusively in Tracy, California.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) Assessment and ImplementationThe contract requires the implementation of NIST SP 800-171 cybersecurity controls to safeguard Controlled Unclassified Information within the covered systems. The contractor must complete a comprehensive self-assessment of compliance with all 110 security requirements outlined in the standard, document findings, and submit the resulting scorecard to the Supplier Performance Risk System. The effort also includes ongoing support for the protection of CUI through technical and procedural measures, ensuring alignment with federal guidelines, as well as readiness to report any cyber incidents in accordance with applicable DoD protocols. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to bid, and the performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 541512 for Computer Systems Design Services.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Military Packaging and Preservation ServicesThis contract requires the provision of military-compliant packaging, preservation, and marking services for defense-related materiel, strictly adhering to DLA standards and MIL-STD-129 requirements. The work involves the application of VCI corrosion inhibitors, desiccants, hermetic sealing techniques, and barcoding systems to ensure long-term protection, traceability, and compliance with federal military specifications. All packaging processes must be executed in a manner that guarantees the integrity of equipment and supplies during storage and transport under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. Performance will take place at a designated location in Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by the deadline of August 17, 2026, following the release date of August 5, 2026, and will be managed by the DLA San Joaquin office under the Department of Defense. Interested parties must access the solicitation through the official DIBBS portal to ensure full compliance with submission protocols.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Mechanical Component Manufacturing for Manual Control LeverThe contract calls for the manufacture of a precision manual control lever with NSN 5340003440745, a defense-grade mechanical component essential for industrial or military systems. Production must utilize casting or forging processes and require specialized tooling to meet exacting military standards, ensuring reliability and durability under demanding operational conditions. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, and the NAICS code 332999 applies to other fabricated metal product manufacturing. Performance is required at Tracy, California, with a ZIP code of 95304-5000, and all deliverables must comply with defense-related specifications without exception. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, leaving a twelve-day window for qualified small businesses to submit proposals. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and the contract is structured as a subcontract, indicating it supports a larger procurement effort. While no point of contact details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All participants must ensure adherence to quality, timing, and regulatory requirements for defense production, with no allowances for non-compliance or deviations from the specified manufacturing methods.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: NA
New
DIBBS
Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to an inability to retrieve prime contract details, as system timeouts have prevented access to essential information such as scope, CLINs, agency specifics, and other metadata required for decomposition. The solicitation, posted on August 5, 2026, with a response deadline of August 17, 2026, is categorized as a subcontract under the DLA DIST SAN JOAQUIN agency within the Department of Defense, but no NAICS code, set-aside type, or point of contact is provided. The place of performance is listed as Tracy, California, with a zip code of 95304-5000, though the city, state, and country fields for the office address remain undefined. The contract’s full details are only accessible via the DIBBS system link, but attempts to extract actionable subcontract data have been thwarted by technical limitations.

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the provision of OSHA-compliant hazard communication materials for all hazardous substances contained in delivered items, specifically including Globally Harmonized System labels and Safety Data Sheets that meet federal regulatory standards. These materials must be accurately generated, formatted, and delivered in alignment with OSHA’s Hazard Communication Standard to ensure worker safety and regulatory adherence throughout the supply chain. The work is scoped to support items delivered to the specified place of performance in Tracy, California, with the ZIP code 95304-5000, and must be completed in accordance with all applicable federal safety and documentation protocols. This is a subcontract issued under NAICS code 541690 by the Department of Defense through DLA Dist San Joaquin, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and all submissions must be received by the stated deadline to be considered. While no specific set-aside designation is provided, the contract is explicitly structured as a subcontract, implying it is part of a larger procurement effort. Contractors must be fully versed in GHS labeling requirements and SDS formatting to meet compliance obligations without delay or error, ensuring seamless integration into the recipient’s hazardous materials management system.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Condensing Unit Supply (HVAC Equipment)The contract entails the supply of six commercial off-the-shelf condensing units identified by NSN 4130016572911, intended for use in refrigeration and cooling systems. These units must fully comply with military packaging and marking standards to ensure compatibility with defense logistics and handling protocols. The procurement is classified as a subcontract under the NAICS code 333414, which corresponds to HVAC equipment manufacturing. The offering is managed by DLA Dist San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, at ZIP code 95304-5000. Solicitation for this contract was posted on August 5, 2026, and responses are due by August 17, 2026. All deliveries must meet the specified technical and logistical requirements, including adherence to military specifications for packaging and labeling, to support seamless integration into defense supply chains. The contract is not subject to any set-aside classifications and is accessible through the DIBBS platform for potential vendors seeking to respond.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Shipment & Labeling ServicesThe contract requires the packaging, marking, and shipment of safety belts in strict accordance with MIL-STD-129 standards and the Defense Logistics Agency’s Vendor Shipment Module requirements. All items must be properly labeled, documented, and prepared for military logistics distribution, ensuring full compliance with federal defense shipment protocols. The work is to be performed at a designated location in Tracy, California, with the zip code 95304-5000 serving as the place of performance. This is a subcontract opportunity under the NAICS code 493190, which categorizes it under other warehousing and storage services, and is managed by the DLA Dist San Joaquin office under the Department of Defense. Bidders must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or certification status. Participation requires familiarity with DLA’s electronic vendor systems and adherence to stringent military packaging and identification guidelines. The contract is accessible via the DIBBS portal using the reference number SPE8E626T4031, and successful performers will support the defense supply chain by ensuring timely and accurate delivery of critical safety equipment to military endpoints.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation of Safety Data Sheets and hazard warning labels for hazardous materials used in the manufacturing or packaging of safety belts, ensuring full compliance with OSHA and Department of Defense regulations. All deliverables must meet federal standards for hazard communication, accuracy, and readability, with strict adherence to mandated content, format, and language requirements. The work is tied to operations in Tracy, California, with the place of performance specified at ZIP code 95304-5000, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting activity managed by DLA Dist San Joaquin under the Department of Defense. While no set-aside type or specific point of contact is indicated, contractors must be prepared to demonstrate capability in handling classified or sensitive defense-related materials and producing compliant documentation under tight deadlines. All submissions must align with the DIBBS system referenced in the UI link, and successful offerors will be expected to support ongoing defense manufacturing efforts with reliable, audit-ready safety documentation.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details