Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Chemistry-Enhanced Separation Reagent Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of specialized chemical additives designed to enhance particle agglomeration or modify surface charge properties to improve the efficiency of acoustic separation processes. These reagents must be formulated to perform consistently under operational conditions typical in industrial or laboratory-scale separation systems where precise control over particle behavior is critical. The chemicals are intended for use in applications linked to Department of Energy objectives, likely involving material processing, waste remediation, or resource recovery where acoustic methods are employed to isolate or concentrate target particles. The subcontract is set to be awarded under NAICS code 325998 for other chemical product and preparation manufacturing, with performance required at Los Alamos, New Mexico, 87545. Proposals must be submitted by October 1, 2026, and the opportunity was posted on July 8, 2026. The contracting entity is Triad, acting as a DOE contractor, indicating the work supports federal energy mission goals. Suppliers must demonstrate technical capability in developing and delivering chemically advanced reagents with proven efficacy in acoustic environments and be prepared to meet stringent quality, reliability, and delivery expectations aligned with DOE standards.

General Info

Supply specialized chemical reagents for acoustic separation at Los Alamos to support DOE mission by October 1, 2026.

Agency

Department Of Energy → Triad - DOE ContractorView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Los Alamos, NM, 87545, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Triad - DOE Contractor
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Energy → Triad - DOE Contractor
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply chemical additives that enhance particle agglomeration or surface charge to improve acoustic separation efficiency.

Similar Contracts

Same NAICS industry code

NAICS: 325998
New
DIBBS
FLUX, SOLDERINGThis contract specifies the procurement of Silver Solder, RMA, Paste, identified by NSN 3439-01-373-7966 and part number ASTM B32, with a unit of issue of BT and a quantity of 3 BTs, each containing 8 ounces per unit pack. The product must comply with ASTM B32 Revision 2014 and meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on acquisition size. The material must have at least 85 percent of its 12-month shelf life remaining upon receipt, and packaging and marking must strictly follow MIL-STD-2073-1E, MIL-STD-129, and ASTM-D3951-15, including commercial packaging provisions where applicable. Unit containers must be glass or plastic jars conforming to PPP-C186, and all packaging must be labeled with shelf-life markings, barcodes, MSL, and special marking code 33. Palletization must comply with DLA Instruction MD00100452 Rev B, and passive RFID tagging is required if DFARS 252.211-7006 is applicable; UII must be 2D barcoded on all packaging levels. Hazardous material handling requirements under OSHA’s HCS and 29 CFR 1910.1200 mandate submission of Safety Data Sheets (SDS) with bids and inclusion of SDS copies with every shipment and in WAWF. Mercury and mercury compounds are strictly prohibited unless explicitly exempted for specific functional components, and any portable instruments containing mercury must have dual containment per NAVSEA 5100-003D. Delivery is FOB destination within 20 days of contract award, with no quantity variance permitted, and shipments must use traceable means—not parcel post—to the designated Marine Aviation Logistics Squadron delivery address. All documentation, labeling, and compliance must be submitted per DLA requirements, and the item is classified as a commercial item.
Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
Federal
68--INSPECTION PENETRANThis contract pertains to the inspection and procurement of repair parts and technical supplies for naval systems under solicitation N0010426QBZ84, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS-MECH) in Mechanicsburg, Pennsylvania. The technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which dictates the applicable drawings, specifications, and standards, all of which must be obtained from the bpmi.e-commerce website and used in their entirety at the specified revision levels. Compliance with order of precedence rules is mandatory, with amendments to the purchase order taking highest priority, followed by the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Contractors must adhere strictly to cleanliness control standards such as MIL-STD-767 and MIL-STD-2041, and are prohibited from using mercury or mercury-containing compounds. Packaging must conform to MIL-PRF-23199 and MIL-STD-2073, with specific guidance provided for the use of heat-sealed envelopes and green poly bags under defined conditions. All deliveries require government authorization and must be accompanied by certified test and inspection reports per DI-QCIC-8872 and cure date certificates per DI-MISC-81318, submitted separately for each unique contract line item. Technical data packages must comply with DD Form 1423 specifications, including proper use of block codes for inspection, acceptance, distribution, and submission schedules, with distribution restricted as indicated by NOFORN or other classification labels. Pricing is valid for 60 days post-closing date and must be submitted electronically via WAWF or approved methods. Participation requires adherence to cybersecurity maturity certification, small business representation, veteran and disability equity provisions, and federal prohibitions on material exclusion and security restrictions. All contractual documents are deemed issued upon electronic transmission, and waivers or deviations must be formally requested with full technical justification prior to manufacture.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 325998
New
Federal
Spill Containment Berms and CratesThe U.S. Army’s 409th Contracting Command, through the 928th Contracting Battalion at Regional Contracting Office Bavaria, is seeking offers for the delivery of Spill Containment Berms and Crates to U.S. Army Garrison Bavaria in Grafenwoehr, Germany, under solicitation W912PB26QA065. The requirement is being procured as a Firm Fixed Price commercial purchase order using the low price technically acceptable evaluation method, with delivery FOB to the specified location. A recent amendment to the solicitation corrects item descriptions, establishes a base quantity of 30 units and an option quantity of 30 units, updates Attachment 1 with revised item specifications, provides responses to vendor inquiries received during the solicitation period, and extends the offer due date to August 18, 2026, with all other terms remaining unchanged. Offerors must download the RFQ directly from SAM.gov, monitor for amendments, and ensure full compliance by submitting complete representations, certifications, technical documentation, and current SAM registration. Proposals must be submitted prior to the deadline to avoid rejection, and no bidder list will be maintained. Questions must be directed to two designated email addresses, and while the solicitation is open to full and open competition, the government reserves the right to delay or cancel the process at any time prior to award. Despite the absence of detailed clauses, evaluation factors, packaging requirements, or contract administration data in the provided documentation, the essential procurement parameters—including product type, delivery point, pricing structure, and key deadlines—are clearly defined.
0409 Aq Hq Contract

POSTED

about 13 hours ago

DEADLINE

in 26 days
View Details

More opportunities from Department Of Energy → Triad - DOE Contractor

Same awarding agency

NAICS: 33399
New
Federal
TECHNOLOGY LICENSING OPPORTUNITY: ScreenFlow Liquid-Liquid MicrocontactorScreenFlow is a microfluidic liquid-liquid contactor that enables efficient, membrane-free mixing and separation of immiscible fluids using paired wettable screens and printed-in gaskets, eliminating the need for fragile microchips or permeable membranes. The design features one hydrophilic screen for aqueous streams and one hydrophobic, oleophilic screen for organic streams, which intersect in overlapping regions to form a stable, capillary-held interface where mass transfer occurs while bulk fluids remain separated. This architecture supports both co-current and counter-current flow, scales linearly by stacking additional screen layers to achieve flow rates from microliters to milliliters per minute, and is fabricated using standard machine-shop tools and off-the-shelf materials, making it accessible and cost-effective. The printed-gasket variant reduces part count by nearly half, simplifies assembly, and eliminates edge leakage, enabling stable, continuous operation over days without degradation, which is critical for industrial extraction, purification, and sample-handling workflows. The technology targets high-value applications including rare-earth and trace-element recovery, pharmaceutical continuous manufacturing, petroleum refining, analytical sample preparation, food and beverage processing such as decaffeination, and water treatment for contaminant removal. With a Technology Readiness Level of 4, ScreenFlow is patent-pending and builds upon an existing U.S. patent, offering exclusive or non-exclusive licensing opportunities through Los Alamos National Laboratory. The system’s robustness, scalability, and compatibility with conventional manufacturing make it ideal for commercialization in industries requiring precise, high-throughput biphasic processing without the complexity or fragility of traditional microfluidic platforms. Proposals must be submitted by August 7, 2026, with inquiries directed to the licensing office at Los Alamos National Laboratory.

POSTED

about 13 hours ago

DEADLINE

in 16 days
View Details
NAICS: 325211
New
Federal
TECHNOLOGY LICENSING OPPORTUNITY: Acid-tuned Terphenyl Membranes (ATM)Acid-tuned Terphenyl Membranes (ATM) is a breakthrough hydrocarbon-based proton exchange membrane technology developed by Los Alamos National Laboratory that redefines how proton conductivity is achieved without relying on excessive sulfonation. By incorporating a precisely placed fluorinated electron-withdrawing unit adjacent to each sulfonic acid group on a rigid terphenyl backbone, the membrane enhances the intrinsic acidity of each proton-carrying site, enabling higher proton conductivity—87 mS/cm at 80°C under full humidity—while simultaneously reducing water uptake by over 60% compared to conventional analogs. This molecular-level innovation delivers superior dimensional stability and mechanical durability, addressing the core weaknesses of traditional hydrocarbon membranes that swell and degrade under wet operating conditions. The result is a high-performance, cost-effective alternative to perfluorinated membranes like Nafion, with the added benefit of scalability and sustainability. The technology is designed for use in hydrogen-related applications including fuel cells, water electrolyzers, energy storage systems, transportation, power generation, and off-road equipment, offering a universal design principle that can be adapted across multiple membrane chemistries. With a TRL of 3 and a U.S. patent pending, the technology is available for licensing through Los Alamos National Laboratory’s commercialization program, with opportunities for exclusive or non-exclusive agreements to companies interested in advancing next-generation electrochemical devices. The licensing opportunity is open until August 31, 2026, and interested parties are encouraged to contact licensing@lanl.gov for further details.
Plastics Material and Resin Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334516
New
Federal
TECHNOLOGY LICENSING OPPORTUNITY: ChronoQuantum Fiber Timing Integrity MonitorChronoQuantum is a quantum-based timing integrity monitor developed by Los Alamos National Laboratory that adds a trusted, independent layer of timing verification to existing fiber-linked precision timing networks without replacing them. Leveraging correlated photon pairs distributed through the same optical infrastructure used by standard synchronization protocols like White Rabbit and PTP, it detects, classifies, and localizes residual timing drift in real time by analyzing the temporal and spectral fingerprints of photon coincidence events. This physics-driven approach reveals issues hidden from conventional telemetry, identifying whether errors originate from endpoint electronics, fiber path conditions, optical filters, or environmental factors, and provides calibrated uncertainty measurements alongside actionable insights. The system operates at telecom wavelengths, integrates seamlessly with existing DWDM equipment, and scales from simple two-node links to complex mesh and facility-scale deployments with redundant components and failover support. The platform enhances operational resilience through flexible modes ranging from passive monitoring to autonomous correction recommendations, powered by optional AI that fuses temporal, spectral, and spatial data to turn fragile quantum measurements into operational intelligence. Designed for high-stakes environments, it targets applications in high energy physics, quantum networking, telecommunications backhaul, GNSS backup systems, and scientific sensing arrays where microsecond or nanosecond timing precision is critical. Currently at TRL 3 with a U.S. patent pending, the technology is available exclusively or non-exclusively through Los Alamos National Laboratory’s licensing program, targeting companies seeking to advance timing assurance capabilities in fiber networks without overhaul of existing infrastructure. Interested parties may engage through the designated licensing contacts at licensing@lanl.gov by the response deadline of August 7, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334413
New
Federal
TECHNOLOGY LICENSING OPPORTUNITY: Electrically Pumped Nanocrystal Laser DiodeThe Electrically Pumped Nanocrystal Laser Diode is a breakthrough laser technology developed at Los Alamos National Laboratory that enables efficient, room-temperature lasing using solution-processed colloidal quantum dots, overcoming decades-long challenges in electrically driven nanocrystal lasers. By addressing fundamental issues such as nonradiative Auger recombination, excessive heat generation at high current densities, and optical losses in traditional device architectures, the innovation integrates engineered nanocrystals with a heat-managed, current-focusing design and a low-loss photonic waveguide to achieve stable optical gain. This platform supports scalable, low-cost manufacturing compatible with printed electronics and on-chip integration, making it uniquely suited for next-generation optoelectronic systems without relying on conventional semiconductor fabrication methods. The technology opens access to compact, high-performance laser sources for a broad range of applications including optical communications, silicon photonics, sensing, defense systems, consumer electronics, and medical diagnostics. Its versatility extends to optical amplifiers and integrated photonic circuits, enabling miniaturized coherent light sources for applications from lidar and free-space communication to biomedical imaging and wearable devices. Currently at TRL 4 with a U.S. patent pending, the technology is being offered for licensing through Los Alamos National Laboratory, with opportunities for exclusive or non-exclusive agreements available to companies seeking to commercialize this disruptive platform. Proposals must be submitted by October 1, 2026, and inquiries should be directed to the designated licensing contacts at LANL.
Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 2 months
View Details
NAICS: 334516
New
Federal
TECHNOLOGY LICENSING OPPORTUNITY: Multi-Channel Atomic Magnetometer (MCAM)The Multi-Channel Atomic Magnetometer (MCAM) is a breakthrough non-cryogenic optical quantum sensor that delivers SQUID-level sensitivity to ultra-faint biomagnetic signals using a single shared vapor cell and optical system to generate up to 16 independent sensing channels simultaneously, eliminating the need for multiple independent sensor units. Unlike traditional systems that rely on liquid helium-cooled SQUIDs, MCAM operates at room temperature using a large alkali-metal vapor cell, broad pump and probe laser beams, and a photodiode array to detect magnetic field-induced polarization rotations via the Faraday effect. Buffer gas within the cell isolates spatial regions behind each photodiode pixel, enabling high-resolution, two-dimensional magnetic field mapping without cryogens, significantly reducing costs and complexity. The rear-mirror optical design shortens the sensor-to-source distance, enhancing spatial resolution, while fiber-optic coupling allows modules to be tiled into conformal helmet or surface arrays that adapt to patient anatomy, supporting applications from brain and heart imaging to pediatric and point-of-care diagnostics. MCAM’s architecture scales efficiently to hundreds of channels and is compatible with adjustable bias coils and multiple alkali-metal and buffer-gas combinations, making it highly flexible for diverse configurations. It achieves sensitivity in the low tens of femtotesla per root hertz at low frequencies while drastically cutting per-channel expenses by sharing critical components across all channels. Ongoing development aims to shrink the effective sensing volume from centimeter to micrometer scale, opening the door to cellular-level magnetic imaging—capabilities unattainable by current cryogenic or conventional room-temperature systems. Applications span medical diagnostics such as magnetoencephalography and magnetocardiography, cancer detection via magnetic particle imaging, low-field MRI, geomagnetic surveying, and fundamental physics research. The technology, protected by U.S. Patent 11,105,865 and currently at TRL 4, is available for licensing through Los Alamos National Laboratory, offering exclusive and non-exclusive opportunities to commercialize a platform poised to revolutionize biomagnetic sensing by making high-performance imaging accessible, mobile, and cost-effective.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 5 months
View Details
NAICS: 334516
Federal
Precision Ultrasonic Transducer ManufacturingThe contract calls for the precise manufacturing of high-frequency, tunable ultrasonic transducers designed specifically for integration into the UltraSep platform’s resonance-locked separation system, requiring advanced engineering to meet strict performance criteria under demanding operational conditions. These transducers must be capable of precise frequency adjustment to maintain resonance with the system’s separation mechanism, ensuring consistent and efficient material partitioning, with production expected to adhere to rigorous quality and repeatability standards suited for industrial-scale deployment. Performance of this subcontract is centered in Los Alamos, New Mexico, under the oversight of Triad, a contractor to the Department of Energy, with full compliance to NAICS code 334516 for other electronic component manufacturing. The opportunity was posted on July 8, 2026, and responses are due by October 1, 2026, indicating a targeted procurement timeline for qualified manufacturers with demonstrated expertise in piezoelectric systems and high-frequency transducer fabrication. All work must align with the technical requirements of the UltraSep platform, and potential bidders must possess the capability to deliver calibrated, reliable units suitable for integration into a sensitive, resonance-dependent separation process.
Analytical Laboratory Instrument Manufacturing

POSTED

15 days ago

DEADLINE

in 2 months
View Details
NAICS: 541714
Federal
TECHNOLOGY LICENSING OPPORTUNITY: Platform to Accelerate Discovery of Tailored Industrial Enzymes (PAD-TIE)The PAD-TIE platform, developed by NREL and Los Alamos National Laboratory, is a high-throughput screening system designed to rapidly identify and optimize enzymes capable of breaking down polyethylene terephthalate (PET) plastic under industrially relevant conditions. Unlike traditional methods that test enzymes one at a time, PAD-TIE evaluates tens of thousands of enzyme variants simultaneously, measuring their activity, stability, and production efficiency in a single process, eliminating costly purification steps and reducing time-to-identification. The system operates at the optimal temperature for PET degradation and is validated in lab-scale bioreactors that mimic real-world recycling environments, enabling the conversion of plastic waste into reusable monomers without harsh chemicals or excessive energy use. With a Technology Readiness Level of 6, the platform is a fully functional prototype with all components tested, and three U.S. patents are pending, making it a mature and protected innovation ready for commercial adoption. PAD-TIE is positioned to serve a broad range of industries including plastic recycling, waste management, polymer manufacturing, and sustainable materials development. Its adaptability allows customization for different PET compositions, additives, and processing conditions, ensuring compatibility with existing infrastructure. The platform’s efficiency and scalability offer a cost-effective solution for scaling enzymatic plastic degradation at an industrial level. Los Alamos National Laboratory is seeking industry partners through exclusive or non-exclusive licensing agreements to further develop and deploy the technology, with applications spanning bioremediation, bioplastics, and closed-loop recycling systems. Interested parties must respond by October 1, 2026, and inquiries should be directed to the provided licensing contacts. The technology is available for commercialization under a non-set-aside procurement with a NAICS code of 541714, and performance will occur in Los Alamos, New Mexico.
Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

15 days ago

DEADLINE

in 2 months
View Details