Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHEST, MEDICAL INSTRUME

Active
SPE2DS-26-T-296HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 17 units of a chest-style medical instrument and supply set, identified by NSN 6545-01-601-1906 and part number 1170NF from Pelican Products, Inc. This rugged container is designed to house a first aid kit for small craft, featuring a drab green plastic exterior with watertight, crushproof, and dustproof specifications including double throw latches, an O-ring seal, an automatic pressure equalization valve, and stainless steel hardware. The interior dimensions accommodate the contained first aid kit, and the unit weighs 1.96 pounds. The chest is intended for military use and must comply strictly with the Medical Marking Standard No. 1, replacing all references to MIL-STD-129. All packaging must meet DLA’s commercial packaging requirements per ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case IP025 applies, with DLA’s Master List of Technical and Quality Requirements taking precedence. The items must be palletized and shipped according to RP001 packaging guidelines. Delivery is required within five days of award under FOB destination terms, with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and the items must be marked and labeled in accordance with established military standards. The delivery destination is FPO AP 96349, with the final destination being Commander, SRF-JRMC Yokosuka Naval Base in Japan. The solicitation number is SPE2DS-26-T-296H, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026. The unit of issue is each (EA), priced at $17.00 per unit, totaling $289.00. The contract notes the item is not regulated by the FDA and includes applicable defense information controls under RD003. The procuring agency is the Department of Defense, Medical Supply Chain, and all technical and quality requirements referenced in the DLA Master List are binding.

General Info

Procure 17 rugged chest-style medical kits, NSN 6545-01-601-1906, delivery to Japan by August 4, 2026, at $17 each.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

PSC 473 BOX 8, FPO, AP, 96349, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-296H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHEST,MEDICAL INSTRUMENT AND SUPPLY SET
CHEST, MEDICAL INSTRUMENT AND SUPPLY SET
SHALL BE USED WITH END ITEM 6545-00-168-6893
KIT, FIRST AID, SMALL CRAFT<(>,<)> COLOR OLIVE
DRAB GREEN; EXTERIOR DIMENSIONS 11.64 IN X
8.34 IN X 3.78 IN; INTERIOR DIMENSIONS 10.54
IN X 6.04 IN X 3.16 IN; WITHOUT FOAM INSERTS;
HANDHELD; WATERTIGHT; CRUSHPROOF; DUST PROOF;
DOUBLE THROW LATCHES; OPEN CELL CORE WITH
SOLID WALL DESIGN; O-RING SEAL; AUTOMATIC
PRESSURE EQUALIZATION VALVE; STAINLESS STEEL
HARDWARE; CONTAINER FOR 6545-00-168-6893
FIRST AID KIT, SMALL CRAFT; MATERIAL PLASTIC;
WEIGHT 1.96 LB
.
UNIT OF ISSUE EACH, EA.
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
NOT REGULATED BY THE FDA.
.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
SPE2DS-26-T-296H
SECTION B
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PELICAN PRODUCTS, INC. 65442 P/N 1170NF
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017690519 0001 EA 17.000
NSN/MATERIAL:6545016011906
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N62758
SRF AND JRMC YOKOSUKA
PSC 473 BOX 8
FPO AP 96349
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE2DS-26-T-296H
SECTION B
PR: 7017690519 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
N62758
COMMANDER
SRF-JRMC YOKOSUKA NAVAL BASE
TOMARI CHO 1 CHOME BLDG A61
YOKOSUKA 238-0002
JP
M/F: (TCN) N6275862115612
RDD:
PROJ: 6CF TP 1
SUPP ADD: Y A61 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A41 DIST: 9B ADV: 2A FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE2DS-26-T-296H NSN/Part Number: 6545-01-601-1906 Quantity: 17 EA Purchase Request: 7017690519QTY: 17 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326199
New
DIBBS
Manufacture of Plastic or Composite ComponentsThe contract concerns the manufacture of molded, extruded, or fabricated plastic or composite components intended for defense logistics applications, with strict adherence to military specifications and standards. All products must meet rigorous quality and performance requirements to ensure reliability in operational environments, and the work is classified under NAICS code 326199 for other plastic product manufacturing. The contract is structured as a subcontract, with performance required at Hill Air Force Base, Utah, specifically at the zip code 84056-5734. The solicitation was posted on August 2, 2026, and responses are due no later than August 13, 2026, with the award managed by the Department of Defense through the Depot Hill office. Participation is open under unrestricted conditions as no specific set-aside type has been designated, and interested parties must submit proposals through the official DIBBS procurement portal prior to the deadline.
DEPOT HILL

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
WINDOW, OBSERVATION
Solicitation # SPE8E5-26-T-3748
The item specified is an observation window with NSN/Part Number 9330-01-131-6571, requested in a quantity of 142 units under Purchase Request 7016937735. Delivery is scheduled for 385 days after order date, with the place of performance located at Hill AFB, Utah, 84056-5734. The solicitation, identified as SPE8E5-26-T-3748, was posted on August 2, 2026, with responses due by August 13, 2026. The contract falls under NAICS code 326199 and is managed by the Department of Defense through the Depot Hill organization, with Khue Nguyen as the primary point of contact. Technical data associated with this item is subject to strict export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, making any disclosure to foreign persons—regardless of location—subject to federal authorization. DFARS 252.225-7048 governs handling, and access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on proper handling of DOD export-controlled data, and have been formally approved by DLA. Distribution is limited to those who have also submitted and been cleared through the DLA Export-Controlled Technical Data Questionnaire, ensuring compliance with defense security protocols.
DEPOT HILL

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
BOX, TOTE
Solicitation # SPE8EF-26-T-1535
The contract pertains to the procurement of BOX, TOTE items under solicitation SPE8EF-26-T-1535, with a total quantity of 352 units divided into two line items: 78 units and 274 units, each priced at $78.00 and $274.00 respectively, for a total contract value determined by the unit quantities. All items are identified by NSN 3990015384355 and must be delivered FOB origin within 146 days, with delivery required by September 14, 2026, and a need ship date between November 2025 and November 2026. Quality and packaging requirements are strictly defined, with compliance mandated to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 labeling standards and palletization must meet RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each, with one unit per pack and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. Two separate delivery addresses are designated—one in New Cumberland, Pennsylvania, and another in Tracy, California—each with specific parcel post and freight shipping details. Transportation instructions reference DLAD Proc Notes C19 and C20. The contract is issued under DoD authorized units of measure, and the corresponding ANSI X12 equivalents must be verified via the provided DLA link. The contracting officer is Teresa Rivera-Cruz, with contact information provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
WINDOW, OBSERVATION
Solicitation # SPE8E5-26-T-3745
The item specified is an observation window with NSN 9330-01-131-6571, with a quantity of 188 units to be delivered 425 days after order date under solicitation SPE8E5-26-T-3745. The procurement is managed by the Department of Defense through Depot Hill, with performance located at Hill AFB, Utah, and the primary point of contact is Khue Nguyen. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 326199. This item is subject to strict export control under either ITAR or EAR, meaning any technical data associated with it may not be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. Access to such data is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this controlled technical data, and compliance is mandatory for all contractors, including those with foreign ownership or subsidiaries.
DEPOT HILL

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE8E5-26-T-3744
The item specified is an observation window with NSN/Part Number 0001S00000052 and a quantity of 195 units, procured under Purchase Request 7007646211. Delivery is scheduled 425 days after award. The contract is issued under solicitation SPE8E5-26-T-3744 by the Department of Defense through Depot Hill, with performance occurring at Hill AFB, Utah, 84056-5734. This procurement is subject to strict export control requirements under either ITAR or EAR, meaning any technical data associated with the item cannot be disclosed or transferred to foreign persons, whether inside or outside the United States, without prior authorization from the Department of State or Commerce. Disclosure to foreign national employees or foreign subsidiaries of U.S. companies is equally restricted. Compliance requires contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and successfully pass the DLA Export-Controlled Technical Data Questionnaire. Access to the controlled data is granted only to DLA contractors who have received formal approval from the DLA controlling authority. The solicitation was posted August 2, 2026, with responses due by August 13, 2026, and is categorized under NAICS code 326199. Primary point of contact is Khue Nguyen at the DLA, reachable via email or phone as listed.
DEPOT HILL

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE8E5-26-T-3747
The item specified is an observation window with NSN 0001S00000052, for a quantity of 147 units, under purchase request 7015394808, with a delivery requirement of 425 days after award. This procurement is governed by strict export control regulations due to the presence of technical data subject to either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—constitutes an export requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled technical data is restricted solely to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA authorities. The solicitation, issued by the Department of Defense through Depot Hill, has the identification number SPE8E5-26-T-3747, was posted on August 2, 2026, and requires responses by August 13, 2026. Performance is to be delivered to Hill AFB, Utah, with Khue Nguyen listed as the primary point of contact for inquiries.
DEPOT HILL

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Electrical Insulation Tape Supply and PackagingThe contract pertains to the supply of electrical insulation tape designated by NSN 5970-00-955-9976, requiring full compliance with military packaging standards including MIL-STD-129 and MIL-STD-2073-1E. This is a subcontract under the Department of Defense, administered by the Defense Logistics Agency, with the work classified under NAICS code 326199 for other plastic product manufacturing. The packaging must meet stringent military specifications to ensure uniformity, durability, and traceability during storage and transport. The contract was posted on August 1, 2026, and is uniquely identified by the award and delivery contract numbers SPE4A625D5620 and SPE4A626F285A, respectively, with a total of 1681 units involved. The place of performance and point of contact information are not specified, and no set-aside provisions are indicated, meaning the subcontract is open to general competition within the defense supply chain.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 326199
New
DIBBS
Electrical Insulation Tape Supply (NSN 5970-00-955-9976)The contract requires the supply of 31,847 units of electrical insulation tape identified by NSN 5970-00-955-9976, adhering strictly to military specifications for performance, durability, and safety. All units must be packaged, labeled, and traceable in full compliance with MIL-STD-129 and MIL-STD-2073-1E standards, ensuring proper identification, handling, and logistics readiness throughout the supply chain. Product verification testing is mandatory to confirm conformance with technical requirements, and each shipment must include documented traceability to support quality assurance and accountability. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 326199 and is scheduled for performance beginning August 1, 2026. The items are intended for military use and must meet rigorous defense supply chain protocols, including uniform packaging and labeling to facilitate efficient inventory management and deployment. While no specific location or point of contact is provided, the contract is administered through DLA’s procurement system and is linked to an active award record for tracking and verification purposes.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 326199
New
SLED
Polypropylene Bags SupplyThe contract calls for the supply of polypropylene bags that meet or exceed the technical specifications detailed in Exhibit C, with any substitutions requiring prior written approval from the Health and Human Services Commission and proof of equivalent performance and quality. The offering is limited to subcontractors responding to a solicitation posted on July 31, 2026, with all bids due by August 14, 2026, at 4:30 PM. The NAICS code 326199 identifies the category as other plastic product manufacturing, indicating the scope is confined to non-specialized plastic goods. The contract is managed by the Texas office of the Health and Human Services Commission, with no specific place of performance or point of contact provided. All performance and delivery obligations must align with the terms set forth in the solicitation, and compliance with Exhibit C is mandatory without exception unless formally authorized. The solicitation is accessible via the Texas SmartBuy portal for qualified suppliers.
Health and Human Services Commission

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
Military-Grade Packaging and Labeling ServicesThe contract requires the provision of military-grade packaging, labeling, and palletization services for electronic components, strictly adhering to the standards of MIL-STD-129, ASTM D3951, and DLA RP001. All work must be executed to ensure full compliance with Department of Defense requirements for shipment to DLA Distribution Jacksonville, with the place of performance specifically designated at the 32212-0103 ZIP code. The packaging and labeling systems must facilitate accurate identification, traceability, and handling throughout the defense supply chain, ensuring readiness for military logistics operations. This subcontract opportunity is open for response until August 15, 2026, with an NAICS code of 326199 indicating it falls under other plastic product manufacturing. It is issued under the Active Devices Division of the Department of Defense and is intended for vendors具备 the technical capability and quality control processes to meet exacting military shipping standards. All submissions must demonstrate experience with defense logistics protocols and the capacity to deliver consistent, auditable compliance on a recurring basis, as the delivered items are critical to sustaining military readiness.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and UV-Protective EncapsulationThe contract requires specialized packaging solutions that meet rigorous military standards, specifically MIL-DTL-117, Type II, Class C, Style 1, which mandates UV-protective, waterproof, and greaseproof opaque bags designed to safeguard sensitive equipment from environmental degradation. All packaging must be heat sealed to ensure complete containment and durability under extreme conditions, and labeling must strictly comply with MIL-STD-2073-1E for uniformity, legibility, and traceability across logistics networks. The packaging is intended for use in demanding military operations where exposure to sunlight, moisture, and contaminants could compromise mission readiness. This subcontract is issued by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, with performance required at Robins AFB, Georgia, 31098-1887. The NAICS code 326199 identifies the industry as other plastic product manufacturing, indicating the need for custom polymer-based packaging solutions. The solicitation was posted on July 31, 2026, with a firm response deadline of August 7, 2026, emphasizing a tight turnaround for qualified vendors capable of delivering fully compliant packaging without exception. Only suppliers with proven expertise in military-grade materials and adherence to federal specification standards are expected to bid.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 326199
New
SLED
Conduit and Protective SleevingThe contract pertains to the supply of conduit and protective sleeving to shield wire harnesses during vehicle upfitting operations, ensuring the integrity and safety of electrical systems in modified vehicles. The solicitation is open for subcontractors to provide materials that meet specified industry standards for durability, heat resistance, and abrasion protection, tailored for use in commercial and government vehicle modifications. The work is associated with NAICS code 326199, which covers other plastic product manufacturing, indicating the materials are likely made from synthetic polymers designed for automotive environments. The opportunity is managed by the Iowa agency, with a posted date of July 31, 2026, and a firm response deadline of August 14, 2026. There is no specified set-aside classification, meaning all eligible subcontractors may respond without restrictions based on size or ownership type. The place of performance and detailed office address are not provided, suggesting that deliveries or installations may occur at various upfitting locations across Iowa or be coordinated directly with the contracting entity. All bids must be submitted through the official portal linked in the solicitation, and interested parties are expected to ensure compliance with technical and delivery requirements without further agency specifications provided in the posting.
Iowa

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TAPE, ATHLETIC
Solicitation # SPE2DS-26-T-299M
Athletic tape, 2.75 inches wide and 30 yards long, in beige color, made with breathable foam and nonsterile, is being procured under NSN 6515-01-714-2078 with a quantity of two boxes, each containing twelve units. The product must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DS-26-T-299M, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within twenty days after order. The purchase request is 7017609499, and the place of performance is Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain. The NAICS code is 339112, and the procurement is managed by the Federal agency for medical surgical supply.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294Y
The contract is for the procurement of four small adult aneroid sphygmomanometer cuff sets, each fully equipped with an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free reusable cuff-mounted aneroid gauge certified to an accuracy of ±3 mm Hg with a five-year warranty. The device must withstand drops from a height of 30 inches in compliance with AAMI standards and is designed for durability and reliability in clinical use. All components are specified to meet exact technical and quality criteria outlined in the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and requirements for removal of government identification from non-accepted supplies. The unit of issue is each, and bidders must clearly state the source and part number being offered. The item is identified by NSN 6515-01-648-3774 under solicitation SPE2DS-26-T-294Y, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF for delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after order. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 339112 applies to medical equipment manufacturing, reflecting the specification and procurement intent under federal acquisition regulations. Bidders are expected to comply with all DLA packaging, identification, and technical compliance requirements as referenced in the solicitation, and no set-asides are indicated for this procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 622110
New
DIBBS
PAPER, ELECTROCARDIO
Solicitation # SPE2DS-26-T-296Q
The contract is for the procurement of electrocardiogram recording paper, specifically a 19.6-foot roll with a red grid pattern, designated by NSN 6515-01-586-1986 and manufacturer part number 989803138171 from Philips Medical Systems. The unit of issue is the package (PG), with each package containing ten individual rolls, and the total quantity required is three packages, equivalent to thirty rolls. Delivery is required within five days to the U.S. Naval Hospital in Guam, FOB destination, with no variance allowed in quantity. The product is regulated by the FDA, and bidders must clearly indicate the country of origin and part number being supplied. All packaging must comply with commercial standards as specified in the procurement document, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest cost. Medical Marking Standard No. 1 supersedes MIL-STD-129 and must be followed for labeling, with copies available through DLA Troop Support. The item is intended for use with the 6515-01-582-4072 defibrillator/monitor-recorder system. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract also includes specific transportation instructions, government-use identifiers, and procurement details tied to the solicitation number SPE2DS-26-T-296Q, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
General Medical and Surgical Hospitals

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-298Z
The nonpneumatic tourniquet is a medically validated device designed to completely occlude blood flow in upper and lower extremities, verified through scientific methods at the U.S. Army Institute for Surgical Research. It features a one-handed, single-route buckle system with a reinforced windless and windless clip mechanism to ensure secure and rapid application. A reinforced stabilization plate with a beveled contact bar minimizes skin pinching, while a grey time tape and Velcro secure strap provide additional functionality and ease of use. The device is black in color with a red elliptical tip to assist users in locating and threading the strap during emergency application, and once applied, it locks in place via multiple clips for fail-safe retention. It is issued as a single unit and meets strict technical and quality standards as defined by the DLA Master List of Technical and Quality Requirements. This procurement under contract solicitation SPE2DS-26-T-298Z requires two units with delivery expected within five days of award, performed at Fort Bliss, Texas. The National Stock Number is 6515-01-521-7976 and the purchase request number is 7017693171. Bidders must clearly state the source and part number being offered. The solicitation is governed by DLA packaging requirements, applies to covered defense information, and mandates removal of government identification from non-accepted supplies. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the primary point of contact is Olusola Emmanuel. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SHEARS, TRAUMA
Solicitation # SPE2DS-26-T-296C
The contract calls for two units of trauma shears, specifically 7.5 inch models with coyote brown handles and black titanium coated stainless steel blades featuring a blunt tip, designed for heavy-duty use. These shears are designated under NSN 6515-01-702-8905 and must be supplied with clear identification of the source and part number as required by the bidder. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on procurement scale. The item falls under packaging requirements specified by DLA and is subject to protocols for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-296C, was posted on August 2, 2026, with a response deadline of August 10, 2026. Delivery must be completed within 20 days after delivery order, to Fort Campbell, 42223-5000, under the Department of Defense’s Medical Supply Chain. The primary point of contact for inquiries is Dorothy Marquis, reachable via email or phone as listed.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL PREPARA
Solicitation # SPE2DS-26-T-300K
The contract pertains to the procurement of surgical preparation blades made of carbon steel, specifically single-edge, straight, 50S type, sourced from Pilling Surgical, Inc. (part number 450205) and American Safety Razor Co. (part number 74-0001), with the unit of issue being a package (PG) of 50 blades. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS to the product specialist, including manufacturer details, part number, and bidder information. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, with containers required to protect against damage and ensure safe delivery via common carrier at the lowest cost. All packaging and marking must meet DLA requirements, and the material is subject to Covered Defense Information provisions. The NSN is 6515-01-147-0210, with a single package quantity of 1 PG under purchase request 7017701239. Delivery is mandated within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DS-26-T-300K, with a response deadline of August 10, 2026, and the place of performance is WaterVliet, NY, 12189-5000. The NAICS code is 339112, and the procurement is for the Department of Defense through its Medical Supply Chain division.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CLAMP, TUBING, REGULATIN
Solicitation # SPE2DS-26-T-294F
The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, in a format of 15mm x 103mm tubes containing TTC indicator, with each package comprising twenty 5 mL units. The unit of issue is PG, and the order quantity is two PG. The item must have a shelf life of twelve months, non-extendable, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C revision. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Packaging must be commercial-grade, sealed, and designed to prevent damage during transit, with shipping containers chosen to ensure safe and cost-effective delivery to the specified point of performance in Williamsburg, Virginia. The item is subject to Defense Logistics Agency packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date. Bidders must provide the source and part number of the item being offered, and the response deadline is August 10, 2026, with delivery required within five days after order award.
Family Planning Centers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
All Other Health and Personal Care Retailers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGI
Solicitation # SPE2DS-26-T-294A
The contract specifies the procurement of 4 packaging groups, each containing 10 sterile, disposable thoracic drainage tubes, totaling 40 units. Each tube is 28 FR, radiopaque, straight, and designed for surgical use, with a required shelf life of 60 months that cannot be extended. The item is identified by NSN 6515-00-763-7367 and must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers. Packaging must adhere to DLA specifications, and all non-accepted supplies must have government identification removed prior to return. The contract includes provisions for covered defense information and requires bidders to clearly specify the manufacturer’s core and part numbers. The solicitation, issued under SPE2DS-26-T-294A, was posted on August 2, 2026, with responses due by August 10, 2026. Delivery is due within 20 days of award, with performance located at Fort Hood, Texas. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez as the point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details