Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, CARBON DIOXIDE

Active
SPE2DS-26-T-275PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for two units of a carbon dioxide measurement chip designed for use with a CMS gas analyzer. Each chip contains ten capillaries pre-filled with a carbon dioxide reagent detection system and has a measurement range of 200 to 3000 ppm. The item is identified by NSN 6550-01-530-5903 and is governed by the procurement document SPE2DS-26-T-275P. The chip is classified as a TYPE I (CODE M) medical item with a strict 24-month shelf life that is non-extendable; no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration date, retest date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial-grade, sealed, and designed to prevent damage during shipping, with exterior containers suitable for safe transport at the lowest carrier rate to Nellis AFB, NV. All packaging and labeling requirements are enforced per DLA standards, and the item is subject to requirements for covered defense information and government identification removal protocols. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, and delivery must be completed within 20 days of award.

General Info

Two CO2 measurement chips, 24-month shelf life, labeled per MIL-STD-129, delivered to Nellis AFB within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

5601 STAFFORD DR BLDG 1301, NELLIS AFB, NV, 89191, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-275P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,CARBON DIOXIDE
CHIP, CARBON DIOXIDE
FEATURES CHIP CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A CARBON
DIOXIDE REAGENT DETECTION SYSTEM; THE MEASURING RANGE IS 200 TO 3000
PPM; FOR CMS GAS ANALYZER
.
UNIT OF ISSUE EACH, EA
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DS-26-T-275P
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-5903 Quantity: 2 EA Purchase Request: 7017626514QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 621410
New
DIBBS
CHIP, SULFUR DIOXIDEThe CHIP, SULFUR DIOXIDE is a diagnostic test device containing ten capillaries pre-filled with a reagent system designed to measure sulfur dioxide concentrations between 5.0 and 150 ppm, intended for use exclusively with the CMS analyzer. Each unit is sold individually and supports ten tests, with the item identified by NSN 6550-01-530-8357 and procured under solicitation SPE2DS-26-T-281B. The product must comply with stringent technical and quality requirements as defined in the DLA Master List and is subject to medical acquisition standards, including commercial packaging that protects against damage and ensures safe transport via common carrier. All packaging must adhere to the Medical Marking Standard No. 1, replacing MIL-STD-129, and each unit must be sealed in a suitable container with exterior shipping packaging appropriate for delivery to the designated point of performance. The item carries a non-extendable shelf life of 24 months from the date of manufacture, and no more than three months may have passed between manufacturing and delivery to the government. Labeling must include the date of manufacture, expiration date, contract number, and lot number in accordance with the latest revision of MMS1C. This item is classified as a TYPE I (CODE M) item under SPE2DS-26-T-281B, and all supplied units must be free of government identification if rejected. Additionally, the item is subject to requirements concerning covered defense information, and its packaging must meet all applicable DLA packaging standards. The procurement is managed by the Department of Defense through the Medical Supply Chain, with a required delivery timeline of five days after order placement and point of contact listed as Tiffany Parker.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CUVETTE, TEST, PROTHRThis contract specifies the procurement of coagulation test cuvettes for prothrombin time testing, designed exclusively for use with the HemoCron Signature JR analyzer and citrated whole blood. Each purchase group contains 45 units, and the item is identified by NSN 6550-01-519-3890 with manufacturer part numbers 000J201C and 6738980 from Werfen USA LLC and Henry Schein Inc respectively. The product has a rigid 12-month shelf life that is non-extendable, and delivery to the government must occur within two months of manufacture. Refrigeration at 2 to 8 degrees Celsius is required throughout storage and transport. All containers must be clearly marked with the lot number and manufactured date prefixed by “MFD,” and packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, while also meeting DLA packaging requirements for secure, damage-resistant commercial shipping suitable for common carrier transport. The item is regulated by the FDA, requiring the contracting official to submit a referral for confirmation through EBS, including detailed information on bidder and manufacturer data. Technical and quality requirements referenced under RA001 are governed by the DLA Master List in effect at the time of solicitation or award, with revision controls based on procurement type. Packaging and marking must conform to MIL-STD-2073-1E, and the delivery is FOB destination with zero tolerance for quantity variance. The contract specifies an 84-day delivery window, with inspection and acceptance occurring at the destination, and the solicitation number is SPE2DS-26-T-280U with a response deadline in August 2026. All items must be sourced exactly as bid, and defense information protections apply under RD003.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CONTROL, COOMBS TESTCONTROL, COOMBS TEST is a liquid control reagent intended for use in blood bank testing, supplied in a 10 mL unit sufficient for 200 tests, and requires refrigerated storage between 2 to 8 degrees Celsius with no freezing permitted. The item has a non-extendable shelf life of one month from manufacture, with a minimum of 85% of that shelf life remaining upon delivery to the government. All labels must clearly indicate the date of manufacture, expiration or retest date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards and ensure safe transport via common carrier while protecting contents from damage, with exterior containers suitable for domestic or export shipping. Marking and packaging must adhere strictly to MMS No. 1 specifications. The item is subject to Defense Logistics Agency packaging and quality requirements, including the removal of government identification from non-accepted supplies, and may involve covered defense information. NSN 6550-01-269-4302 is referenced for this item under solicitation SPE2DS-26-T-282F, with a delivery requirement of 20 days after order award and a point of delivery to APO 09094-3219. The contract is managed by the Department of Defense Medical Supply Chain, and inquiries should be directed to Mary-Kathryn Donahue.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CUVETTE, TEST, PROTHRThe contract specifies the procurement of coagulation test cuvettes for prothrombin time analysis, compatible exclusively with the HemoChronic Signature JR analyzer and designed for use with citrated whole blood. Each unit is packaged as a case of 45 cuvettes, designated under the NSN 6550-01-519-3890 with a single purchase group, and must be delivered within 20 days FOB destination with zero variance allowed in quantity. The product has a non-extendable shelf life of 12 months and must not exceed two months from date of manufacture at the time of delivery to the government; all containers must be clearly marked with the lot number and manufacture date prefixed by "MFD." Strict refrigeration between 2 and 8 degrees Celsius is required at all times. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be sealed in commercial containers capable of preventing damage during transit, shipped via the most cost-effective carrier to the designated delivery point. The item is regulated by the FDA, requiring confirmation through an EBS referral, and must be sourced with specified manufacturer part numbers from WERFEN USA LLC or HENRY SCHEIN INC. Technical and quality requirements are governed by the DLA Master List, and all packaging must adhere to DLA standards including RD003 provisions for covered defense information. The solicitation, issued under SPE2DS-26-T-282D, is managed by the Department of Defense’s Medical Supply Chain, with bids due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, E COLI DETECTThe test kit is designed for the detection and differentiation of E. coli O157 and H7 antigens, containing all necessary components for 50 tests per unit, including 4 mL each of O157 and H7 latex reagents, a 4 mL control latex, 3 mL each of positive and negative controls, disposable slides, and stirring sticks. The kit requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. It is classified as a Type I (Code E) medical item with a non-extendable shelf life of five months, and no more than three weeks may have elapsed from the date of manufacture to the delivery date to the government. All labeling must comply with Medical Marking Standard No. 1, clearly indicating the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must meet commercial standards, ensuring secure, damage-resistant unit containment and suitable exterior shipping containers for safe, cost-effective delivery to the specified point of delivery, with all markings conforming to the specified medical marking requirements. The item is identified by NSN 6550-01-444-7825, with a quantity of one unit ordered under contract SPE2DS-26-T-280X, and delivery is required within 20 days of award. Technical, quality, and packaging requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance enforced through referenced standards including RD003, RP001, and RQ011.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
WRIGHT GIEMSA STAINThe contract is for the procurement of a Wright Giemsa Staining Kit for malaria use, identified by the part number ENG3240 and equivalent commercial codes including Fisher Scientific P/N ES3240, with a uniform unit of issue as each (EA). The product is regulated by the FDA and must comply with strict shelf-life requirements, mandating a non-extendable 12-month shelf life as defined for Type I (Code H) medical items. All kits must contain stain, buffer, and methyl alcohol in a single sealed unit and be packaged in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, ensuring protection from damage and suitability for safe transportation via commercial carriers to the delivery point. The item must be labeled and marked precisely per MMS No. 1 standards, and bidders are required to clearly state the manufacturer, commercial part number, and country of origin. Packaging must adhere to MIL-STD-2073-1E, and delivery is required FOB destination within 84 days, with zero tolerance for quantity variance. The solicitation, issued under SPE2DS-26-T-279C, references technical and quality standards from the DLA Master List, and procurement is governed by federal medical acquisition protocols, including mandatory FDA referral through EBS with full supplier and manufacturer details. The NSN is 6550-01-449-4553, delivery is to APO 09227-0000, and the point of contact is Tiffany Parker of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
SULFOSALICYLIC ACID, DISulfosalicylic Acid, Dihydrate is specified as an analyzed reagent meeting ACS standards with a net weight range of 100 to 115 grams per bottle, equivalent to 4 ounces, and issued in single-bottle units. The item is classified as a combustible, corrosive hazardous material under UN 3261, Class 8, Packing Group II, identified as a corrosive solid acidic organic compound. Compliance with hazardous materials regulations including 49 CFR and ICAO technical instructions is mandatory for packaging. A current Material Safety Data Sheet (MSDS) must be submitted electronically to DLA.MSDS@DLA.MIL along with cover sheet P-75 containing logistics and NSN information, and a physical copy must accompany each shipment. The NSN is 6550-00-146-4875, and the contract is issued under solicitation SPE2DS-26-T-279K with a response deadline of August 3, 2026. Bidders must clearly state the source and part number being supplied. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation or award date, depending on acquisition size. The point of contact for the solicitation is Anh Lam with direct email and phone access provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMAL
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CULTECH JEMBEC G C
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHLORINE TEST TABLEThe contract specifies the procurement of chlorine test tablets, specifically DPD No. 3 tablets designed to measure combined chlorine levels in water, which form when chlorine reacts with impurities. Each unit is packaged as a PG containing 100 tablets, with the item identified by NSN 6550-01-574-6867 and solicitation number SPE2DS-26-T-280D. The product must meet stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA packaging requirements including the Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport at the lowest cost to the designated delivery point, with all labeling conforming to MMS1C specifications. The item has a non-extendable shelf life of 30 months from the date of manufacture, and no more than four months may have passed between manufacture and delivery to the government. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number. The contract falls under a federal medical acquisition and requires compliance with all applicable defense information handling protocols. Delivery is required within 20 days after award, with the point of performance listed as FPO, ZIP 96675. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, and the purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Anh Lam as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, SALMONELLA IDThe contract is for a single unit of a Salmonella Identification Test Kit, identified by NSN 6550-01-360-5759, designed as a rapid latex-based diagnostic tool for Salmonella grouping, including red, blue, and green positive controls, disposable mixing sticks, reaction cards, sample dispensers, and suspension tubes. Delivery is required within five days of a government-issued order to the Naval Medical Readiness Logistics Command at 565 Antim Road, Building 565, Cheatham Annex, Williamsburg, VA 23185-5830, under FOB Destination terms, meaning the contractor assumes all transportation costs and risks until delivery. The procurement falls under the NAICS code 621410 for Medical Laboratories and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with solicitation number SPE2DS-26-T-248N issued on July 27, 2026, and responses due by July 30, 2026. Packaging and labeling must strictly comply with the Medical Marking Standard No. 1, superseding MIL-STD-129 for medical items, requiring accurate NSN, manufacturer details, unit of issue, and barcoding including Data Matrix for logistics tracking, while preservation must maintain refrigerated conditions between 2–8°C to ensure shelf-life integrity. Inspection and acceptance occur at the destination by the government under FAR 52.246-2, with compliance required to DLA Master List standards, ASTM D3951 for non-hazardous materials, and FED-STD-313 for hazardous substance handling. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, human trafficking prevention, employment verification, sustainable products, cybersecurity safeguards including NIST SP 800-171 and safeguarding covered defense information, export controls, payment procedures via Wide Area WorkFlow, subcontracting for commercial services, and prohibitions on certain Chinese military suppliers and hexavalent chromium. Offerors must provide a Unique Entity Identifier and CAGE code, represent size and socioeconomic status including 8(a), HUBZone, SDVOSB, or WOSB certifications if applicable, and comply with disclosure requirements for covered defense telecommunications equipment. Pricing is not specified in the solicitation, and the basis of award is not explicitly stated, though a trade-off evaluation may be used.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTIThe contract solicitation SPE2DS-26-T-248U seeks the procurement of Culture Medium, Motility Determination, a regulated medical supply specifically designed for motility testing with TTC indicator, supplied in 15mm x 103mm tubes, with a unit of issue of PG (20 x 5 mL per package). The item has a strict shelf-life requirement of 12 months from the date of manufacture, which is non-extendable, and no more than one month may have passed between manufacture and delivery to the government. The product must be stored and transported under refrigeration between 2 to 8 degrees Celsius (36 to 46 degrees Fahrenheit), with freezing strictly prohibited. Packaging must adhere to commercial standards and comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and labeling must include the date of manufacture, expiration or retest date, and contract or lot number in accordance with MMS1C. All shipments must meet DLA Packaging Requirements for Procurement and be packed in commercial shipping containers suitable for safe, low-cost delivery by common carrier to the designated location at Cheatham Annex, Williamsburg, VA, with FOB destination terms placing transport responsibility on the contractor. The product is subject to FDA regulatory oversight and must comply with federal hazardous materials labeling standards, requiring submission of Safety Data Sheets prior to award. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements and requires compliance with NIST SP 800-171 cybersecurity standards, export control regulations, and prohibitions on hazardous substances such as hexavalent chromium. Electronic invoicing through Wide Area WorkFlow is mandatory, and delivery is required within five days after award. Full compliance with medical marking, preservation, and traceability standards is essential for acceptance at the destination, and all offerors must provide their UEI and CAGE codes, affirm their small business status if applicable, and disclose any participation in socioeconomic programs. The solicitation follows a Lowest Price Technically Acceptable evaluation approach, with no pricing data provided in the solicitation other than a quantity of two PG.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
ADMINISTRATION SET, INTThe contract is for the procurement of administration sets, intravenous, selectable drip, identified by NSN 6515-01-652-5203, with a unit of issue of one package (PG) containing 48 units each. The item features a three-luer activated Y-site design with an 82-inch extension set that includes two luer-activated Y-sites, an extra pinch clamp, and a spin lock, and must be supplied sterile. The total quantity ordered is one package per line item, with multiple line items listed, all referencing the same NSN. Delivery is required within 20 days of order placement, with FOB destination terms placing full transportation responsibility and risk on the contractor until delivery at designated locations, including facilities in Omaha, Charlotte, Waco, and Rock Island Arsenal. Packaging must comply with RP001 DLA Packaging Requirements and Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for all medical acquisitions; each unit must be sealed in a protective container and packed in commercial-grade shipping containers to ensure safe transit at the lowest cost. Marking must include the correct unit of issue and quantity, with all labeling conforming to MMS No. 1 guidelines, which can be accessed through DLA Troop Support. Electronic invoicing through WAWF is mandatory, and offers must be submitted via the DLA-BSM Internet Bid Board System by the response deadline of August 3, 2026. The solicitation incorporates multiple FAR and DFARS clauses related to cybersecurity, including NIST SP 800-171 compliance and mandatory reporting of cyber incidents within 72 hours, restrictions on procuring covered telecommunications equipment from prohibited vendors, protection of government work product, and whistleblower protections. Contractors must provide their Unique Entity ID and CAGE code and may be required to affirm size status and socioeconomic certifications if claiming small business or other status. The contract also includes stringent requirements for hazardous material handling, with Safety Data Sheets required and labeling governed by OSHA standards. All technical and quality requirements referenced by R or I numbers must align with the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards like ASTM D3951. Payment terms include accelerated payments for small business subcontractors, and provisions prohibit unauthorized obligations and govern contract modifications. Performance will be inspected and accepted at the destination, with no prior inspection required. The
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
COMPRESS AND BANDAGThe contract specifies the procurement of trauma dressings described as compress and bandage, each consisting of a 4-inch by 3-yard elastic bandage with an attached 4-inch by 5-inch sterile non-adherent foam pad in black color. Each unit is sold individually and must meet a minimum shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the delivery date to the government. The items are identified by NSN 6510-01-571-9729, with a total quantity of 36 units required under purchase request 7017198580. Delivery is due within 20 days after award. The procurement is governed by DLA packaging requirements and incorporates technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE2DS-26-T-282Y, issued on July 28, 2026, with responses due by August 3, 2026, and the place of performance is Fort Bliss, Texas, 79918-0000. The contracting activity falls under the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with Kendall Jones listed as the primary point of contact.
Corrugated and Solid Fiber Box Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325413
New
DIBBS
TEST KIT, CHLAMYDIA TRAThis contract is for the procurement of a qualitative direct immunofluorescence test kit designed for the detection of Chlamydia trachomatis in human urogenital and ocular specimens, as well as for confirming Chlamydiae in cell culture. The kit includes two positive control slides, mounting fluid, and the Chlamydia test reagent, ensuring reliable and standardized diagnostic capability. The item is identified by NSN/Part Number 6550-01-725-3600, with a single kit ordered under Purchase Request 7017651737. Delivery is expected within 20 days after order. The solicitation, numbered SPE2DS-26-T-281C, was posted on July 28, 2026, with responses due by August 3, 2026, under a federal procurement process managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. The place of performance is listed as APO with ZIP code 09094-3219, indicating military or overseas delivery. The primary point of contact is Mary-Kathryn Donahue, reachable via email and phone for inquiries. The NAICS code 325413 classifies this as a pharmaceutical and medicine manufacturing activity, affirming the technical and regulatory standards applicable to the test kit's production and distribution.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
BULB, OTOSCOPEThe contract is for the procurement of 15 otoscope bulbs under NSN 6515-01-647-7534, sourced from Welch Allyn, Inc. with part number 06500-U, requiring delivery within 20 days to Fort Bragg, North Carolina, under FOB destination terms. The item is classified as a FDA-regulated Class I medical device, requiring compliance with registration, listing, labeling, and GMP standards even if a 510(k) is not mandatory. Packaging must adhere to commercial standards specified in the procurement document, with each unit sealed in a protected container and shipped in suitable exterior containers ensuring safe, cost-effective delivery. All marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The items must be shipped via traceable freight methods, excluding parcel post, and palletization must comply with DLA packaging requirements. The contract reference number is SPE2DS-26-T-278L, with a response deadline of August 3, 2026, and the required delivery date is July 29, 2026. The purchasing unit price is $15.00 per unit, totaling $225, with no variance allowed in quantity. The contracting official must submit a referral in EBS to confirm regulatory compliance, including manufacturer and bidder details. The supply chain and delivery logistics are managed under Defense Logistics Agency protocols with specific identification codes for tracking and accountability.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTUREThe contract specifies the procurement of acupuncture needles measuring 0.30 mm in diameter by 50 mm in length, with a unit of issue of a package containing 100 needles. Each package must be labeled with the NSN 6515-01-674-2741, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract number alongside the lot number. All containers must be marked with the lot control number and manufacture date prefixed by “MFD”. The supplier must clearly identify the company and part number being provided, including approved identifiers such as LHASA OMS, INC. P/N SJ.30X50 and OWENS & MINOR DISTRIBUTION INC P/N 6244RM128488. The product is regulated by the FDA, requiring referral through EBS for confirmation by the product specialist prior to award, with full bidder and manufacturer details provided. All packaging must comply with commercial standards, be sealed to protect contents from damage, and be shipped in suitable exterior containers for safe transit at the lowest carrier rate. Labeling and marking must follow Medical Marking Standard No. 1, surpassing references to MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The delivery is FOB destination, with a strict 20-day delivery timeline and a required delivery date of July 29, 2026. No quantity variance is permitted. The items must be palletized per RP001, shipped via traceable means excluding parcel post, and delivered to the specified military facility at Fort Bragg, North Carolina. The contract is issued under solicitation SPE2DS-26-T-277G, with total quantity of 4 packages and a unit price of $4.00 per package.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
SPONGE, SURGICALThe product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
All Other Health and Personal Care Retailers

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
REFILL MODULES, PROCThe contract specifies the procurement of twenty-eight refill modules for the Brosewell Hinkle Pediatric Resuscitation System, designed for use with the seven-color packs or color-code cart. These modules support critical pediatric emergency procedures including intraosseous access, oxygen delivery, intubation, and IV delivery, and are explicitly latex-free to ensure safety and compliance with medical standards. Each complete unit must be packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers suitable for safe transport by common carriers at the lowest possible cost to the specified delivery point at Fort Bliss, ZIP 79918-2527. All items must conform to Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and labeling must follow this standard strictly. The unit of issue is each, with one unit being procured under NSN 6515-01-513-9488 and purchase request 7017631807. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling compliance. The solicitation, issued under SPE2DS-26-T-277L, has a response deadline of August 3, 2026, and requires delivery within 20 days after award. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with primary point of contact Brooke Webb.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, INTRAVENOUSThe contract specifies the procurement of 6 packages of intravenous catheters, each containing 200 units, for a total of 1,200 catheters. Each catheter is a 20-gauge polyurethane device with a 1-inch straight needle, featuring a passive safety design that automatically engages a safety clip when the bevel exits the catheter hub, with the bevel orientation clearly marked on the push-off plate. The catheters have no wings, are sterile, and must comply with strict shelf life requirements: a minimum of 60 months from manufacture and no more than 9 months elapsed between manufacturer date and delivery to the government. All labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, adhering to the latest revision of MMS1A standards. The product must meet technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, and packaging must conform to DLA requirements. The contract includes provisions for the removal of government identification from non-accepted supplies and applies to covered defense information. The solicitation number is SPE2DS-26-T-282X, with a response deadline of August 3, 2026, and delivery must be completed within 20 days after order. The point of contact is Vernon Stevenson of the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
WIRE, BONEThe contract specifies the procurement of sterile Kirschner wires, described as threaded, 9 inches long, with a diameter of 0.045 inches and diamond-point ends on both sides, supplied in packages of five units per package, with a total order quantity of four packages. The item is regulated by the FDA and requires confirmation through the EBS referral system, with mandatory inclusion of bidder and manufacturer details including part numbers such as ZIMMER INC P/N 47-0262-012-00 and TWO RIVERS MEDICAL P/N 47-262-12-00. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and protection during transit. Each unit must be sealed in a container that prevents damage, and shipping containers must ensure safe delivery at the lowest cost to the designated destination, which is APO 96260-5479. The contract adheres to DLA packaging and quality requirements under RP001 and RA001, referencing the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The NSN is 6515-01-466-5249, with a delivery window of 84 days, FOB destination, zero quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DS-26-T-280T, with a response deadline of August 3, 2026, issued under NAICS code 339112 by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
BRACE, WRIST AND FOREARThe contract pertains to the procurement of two wrist and forearm braces with NSN 6515-01-699-6578, supplied by NORTH COAST MEDICAL, INC. under part number NC91263, for delivery within 84 days to a designated military medical facility in APO AE 09227-0000. Each unit must be individually sealed in a commercial-grade container that protects against damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible rate. All packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions must follow RP001 and other referenced DLA guidelines. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, listing, labeling, and GMP standards, though a 510(k) may or may not be required. The contract specifies zero variance in quantity, with inspection and acceptance occurring at destination, and mandates adherence to DLA packaging and marking protocols including palletization standards. Delivery is FOB destination, and transportation must conform to DLAD procedural notes C19 and C20. The solicitation is issued under SPE2DS-26-T-279E with a response deadline of August 3, 2026, and the item is procured under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICALThe connector is a surgical-grade, corrosion-resistant metal component designed specifically for oxygen tube fittings, featuring a Diamond O2 quick-connect mechanism with a diss male end and an integrated check valve to ensure safe and reliable gas flow control. It is classified under NSN 6515-01-457-0271, sold individually, and must comply with stringent medical marking standards replacing MIL-STD-129, as outlined in Medical Marking Standard No. 1. Packaging must meet commercial specifications, with each unit sealed in a protective container and shipped in robust exterior packaging suitable for safe transport via common carriers at the lowest cost to the designated delivery point in APO, 09094-3219. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which applies to the revision in effect on the solicitation issue date, and all bidders must clearly indicate the source and part number of the offered item. The solicitation, issued under SPE2DS-26-T-278F, has a response deadline of August 3, 2026, and requires delivery of 10 units within 20 days after contract award, with Defense Information potentially applicable to this acquisition.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details