Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, CARBON MONOXID

Active
SPE2DH-26-T-5332Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a CHIP, CARBON MONOXIDE calibration standard designed for use with the CHIP-MEASUREMENT-SYSTEM electronic detector tube system, with a measurement range of 5.0 to 150 ppm and supplied as 10 capillary tubes for ten gas measurements. Each unit is sold individually and must meet strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with specific references to the R and I numbering system. Packaging must comply with DLA regulations, including commercial packaging standards specified in Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in protected containers to prevent damage during transit. The item is classified as a TYPE I (CODE M) shelf-life item with a mandatory 24-month shelf life that is non-extendable, and no more than three months may have passed from the date of manufacture to the date of government delivery. All packaging must clearly标明 the date of manufacture, expiration or retest date, and the contract or lot number consistent with the latest MMS1C guidelines. The procurement is governed by solicitation SPE2DH-26-T-5332, with a delivery requirement of 20 days ADO to Joint Base Andrews, Maryland, and the NSN is 6630-01-482-4375. Covered Defense Information provisions apply, and removal of government identification from rejected supplies is required. The point of contact for inquiries is Tina Vu at DLA Troop Support, with additional packaging documentation available through official DLA channels.

General Info

CHIP carbon monoxide calibration standard, 10 capillary tubes, 5–150 ppm, 24-month non-extendable shelf life, DLA packaging standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

3424 TENNESSEE AVE, JOINT BASE ANDREWS, MD, 20762, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DH-26-T-5332 Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,CARBON MONOXID
CHIP,CARBON MONOXIDE
FOR USE WITH CHIP-MEASUREMENT-SYSTEM ELECTRONIC DETECTOR TUBE SYSTEM;
RANGE 5.0 TO 150 PPM; 10 CAPILLARY TUBES FOR 10 GAS MEASUREMENTS
UNIT OF ISSUE: EA (EACH)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
SPE2DH-26-T-5332
SECTION B
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-482-4375 Quantity: 1 EA Purchase Request: 7017547715QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
DIBBS
Commercial Voltmeter SupplyThe contract calls for the supply of two commercial voltmeters identified by NSN 6625016240283, intended as off-the-shelf electronic test instruments for use by the U.S. Naval Air Facility Atsugi in Japan. These devices are to be procured under a subcontract and are classified under NAICS code 334515, which pertains to the manufacturing of electronic test equipment. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the place of performance is designated as FPO with ZIP code 96306-1204. The procurement is managed by the Maritime Supply Chain ESOC Buys organization under the Department of Defense, and the instruments must meet standard commercial specifications without customization.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
Circuit Card Assembly SupplyThe contract pertains to the supply of nine circuit card assemblies identified by NSN 5998014203070, each requiring ESD/EMI-compliant packaging and proper labeling to meet military standards. The items must be delivered to the Defense Logistics Agency facility in Tracy, California, with a ZIP code of 95304-5000. The solicitation is categorized as a subcontract under NAICS code 334515, which corresponds to the manufacturing of electronic components and boards. The posting date is July 20, 2026, and responses are due by July 31, 2026, with the procurement managed by the Maritime Supply Chain within the Department of Defense. All deliverables must strictly adhere to the specified packaging and labeling requirements to ensure compatibility with defense logistics and handling protocols.
MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
COUNTER, ELECTRONIC,This contract is for the procurement of three electronic counters identified by NSN 6625-01-534-1030 and part number 04-7700-000, furnished by Prime Technology LLC under solicitation SPE7M1-26-T-198S. The items are subject to strict restrictions on mercury exposure: no intentional addition or direct contact with mercury or mercury-containing compounds is permitted, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents specifically authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking requirements under MIL-STD-129 with no special marking codes. The items are to be delivered FOB origin within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and hazardous materials shipping complies with IP025 standards. The contract references DLA’s Master List of Technical and Quality Requirements for incorporated technical specifications and specifies the use of DoD unit of issue, with delivery originally required by December 28, 2026, and an updated ship date of January 5, 2027.
MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
LEAD, TESTThis contract pertains to the procurement of a commercial off-the-shelf item identified by NSN 6625-01-406-7807 and part number 1332-0159, with a quantity of 140 units to be delivered FOB origin within 203 days, targeting a need ship date of February 9, 2027, and an original delivery date of March 6, 2027. The item is classified as a critical application product and must comply with all applicable DLA technical and quality requirements referenced by R and I numbers, as defined in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively, with specific packaging methods including pressure, drying, and containment standards, and palletization in accordance with RP001. Special handling instructions prohibit the intentional addition of mercury or mercury-containing compounds unless functional components such as batteries, fluorescent lamps, or sensors are involved, which must include secondary containment per NAVSEA 5100-003D. The use of class I ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without explicit written approval from the contracting officer. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation requirements must follow DLAD Proc Notes C19 and C20. The contract has zero variance tolerance for quantity, inspection and acceptance occur at destination, and the point of contact for inquiries is David Larsen with the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
TEST TOOL, IMAGE QUALITThe item is a test tool or phantom designed specifically for image quality testing on portable digital radiography systems (PDRS), with the NSN 6525-01-651-1758 and device code 13272. It is compatible only with portable digital radiography equipment and must be supplied as a complete unit with proper packaging that meets commercial standards and protects against damage or breakage. All units must be packed in suitable exterior shipping containers, ensuring safe and cost-effective delivery to the specified point of delivery, with export packaging required when necessary. The item must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and suppliers must provide the source and part number being offered. The solicitation is part of a federal procurement under contract SPE2DH-26-T-5312, with a single unit requested, a delivery requirement of five days ADO, and is managed by the Department of Defense’s Medical Supply Chain FSH. Bid responses are due by July 27, 2026, and the NAICS code is 334515, indicating classification under medical equipment manufacturing.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
OHMMETERThe contract is for a direct-reading ohmmeter, a commercial off-the-shelf item with part number DET3TD and NSN 6625-01-113-5993, requiring delivery of one unit within five days FOB origin. The item may contain batteries and must comply with DLA’s Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951. Packaging must adhere to RP001 and MIL-STD-129, with non-hazardous items packaged commercially per SPE7M0-26-T-9941 while hazardous items must follow TQ requirement IP025. Palletization is governed by DLA packaging standards, and all marking and labeling must meet federal guidelines. The delivery destination is the HQ HHD RSG AMMO DEPOT in Iwakuni, Japan, with the same address serving as the shipping and mark-for destination. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each, with a total price of $1.00, and is governed by the Federal Acquisition Regulation under a simplified acquisition. The solicitation number is SPE7M0-26-T-9941, with a response deadline of July 23, 2026, and an original required delivery date of July 6, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the primary point of contact is Gerard Quinn.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
VOLTMETERThe contract solicits two voltmeters with NSN 6625-01-624-0283 under solicitation number SPE7M0-26-T-013C, with a delivery requirement of five days after delivery order. The item is being procured by the Department of Defense through the Maritime Supply Chain ESOC Buys office, and performance is designated to FPO with ZIP 96306-1204. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with revision control tied to the solicitation issue or award date depending on acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted July 20, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 334515 for other measuring and controlling device manufacturing. Primary point of contact is Gerard Quinn, reachable via email and phone provided, and further details are available through the DIBBS system. Government identification must be removed from any non-accepted supplies in accordance with RQ011.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
PAPER, LENSPaper, Lens with dimensions of 4 inches by 6 inches is specified as Type 1, Class 5 for wet use, and is supplied in units of issue packaged as 50 per pack. The contract requires compliance with technical and quality requirements identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. This item is identified by NSN 6640-01-459-4239 with a required quantity of one pack, referenced under purchase request 7017544773. Delivery is to be completed within 20 days of award. The solicitation number is SPE2DS-26-T-252P, posted on July 20, 2026, with responses due by July 27, 2026. It is a federal procurement under NAICS code 334515, managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, with performance at FPO and point of contact Olusola Emmanuel reachable at olusola.emmanuel@dla.mil or 4457373766.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334515
New
Federal
Solicitation - High Resolution Near-Infrared CameraThe National Institute of Standards and Technology (NIST) is conducting market research to identify qualified vendors capable of supplying a High Resolution Near-Infrared Camera that meets specified technical requirements, with no intent to award a contract immediately. This sources sought notice, identified by solicitation number NB672000-26-02301 and posted on July 6, 2026, with responses due by July 14, 2026, is purely an information-gathering tool and does not obligate the government to issue a solicitation or pay for any submitted materials. All submissions must be limited to five pages and include company profiles with employee count, office locations, UEI, and CAGE codes; the names of the provider and manufacturer along with the product’s country of origin; sample product specifications and documentation demonstrating compliance; typical lead times including installation and training; and verification of small business status. The requirement falls under NAICS code 334515 with a small business size standard of 750 employees, and while all responsible firms—large and small, including SB, SDB, WOSB, HUBZone, SDVOSB, and VOSB—are encouraged to respond, the acquisition may become a small business set-aside if at least two qualified small businesses are identified. The product is expected to be delivered to Boulder, Colorado, with primary point of contact Daniel Kent reachable via email or phone, and all submissions must be uploaded through the designated SAM.gov portal.
Department Of Commerce Nist

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334515
New
Federal
KeySight Signal Analyzers for KSCThis solicitation is a combined synopsis and Request for Quotations for KeySight Signal Analyzers under solicitation number 80TECH26QA081, issued by NASA’s It Procurement Office under the authority of FAR Subpart 12.6 for commercial items. The procurement is conducted using a Lowest Price Technically Acceptable evaluation method and is restricted to the brand-name product per a Justification for Other Than Full and Open Competition. The NAICS code 334515 applies with a small business size standard of 750 employees, and quoters must declare their small business status. All quotes must include a firm fixed price covering all costs including shipping, delivered FOB Destination to NASA Kennedy Space Center in Florida, within 17 weeks of award. The quote must be submitted as a PDF and include the solicitation number, delivery schedule, payment and warranty terms, taxpayer identification number, and any special commercial terms, signed by an authorized representative. The vendor must comply with FAR 52.212-1 and FAR 52.212-4, and NASA Clause 1852.215-84 applies. No further communications are anticipated unless the Government determines it is advantageous, and quotes may be eliminated without explanation if technically or price-wise noncompetitive. Questions must be submitted via email by July 22, 2026, and quotes must be electronically received by July 23, 2026, by 4:00 PM ET; failure to meet these deadlines results in ineligibility. The Government assumes no responsibility for electronic transmission failures.
NASA It Procurement Office

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
Federal
Sole Source- Pickering VDATS kits
FA8571 Maintenance Contracting Afsc Pzim

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334515
New
Federal
Specracom SecureSync 2400
Naval Air Warfare Center

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Delivery CoordinationThis contract requires precise coordination of time-sensitive FOB Destination deliveries for hazardous material shipments, with all deliveries required to be completed within 20 days of award. Compliance with Department of Defense standards is mandatory, including adherence to all regulatory documentation and real-time tracking protocols for hazardous cargo. The work falls under NAICS code 484220 and is categorized as a subcontract within the Medical Supply Chain FSH organization under the Department of Defense. Performance is designated to take place at FPO with ZIP code 09588, indicating operations may involve overseas or military post locations. Responses must be submitted by the deadline of July 27, 2026, following the solicitation posted on July 20, 2026, with no set-aside designation specified, leaving eligibility open to qualified bidders regardless of business size or certification status.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks providers to deliver regulatory compliance services specifically tailored to hazardous materials labeling, safety data sheet preparation, and MIL-STD-129 marking for military shipments. These services are critical to ensuring adherence to federal and Department of Defense standards for the safe handling, transport, and identification of hazardous substances within the military supply chain. The contractor will be responsible for accurately documenting and marking hazardous materials to meet mandated regulatory requirements and to support seamless logistics operations across Department of Defense channels. The work is categorized under NAICS code 541690 and is structured as a subcontract with a response deadline of July 27, 2026. Performance is required at FPO, ZIP 09588, which indicates delivery to military postal addresses typically used for overseas or expeditionary locations. The solicitation originated from the Medical Supply Chain FSH under the Department of Defense, emphasizing the importance of precision and compliance in medical and logistical contexts involving hazardous material shipments. All deliverables must align with current Department of Defense and federal transportation regulations to avoid operational delays or safety violations.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
Supply of CO₂ Gas Analyzer Measuring TubesThe contract requires the manufacture and supply of 14,000 packages of glass measuring tubes specifically designed for use in CO₂ gas analyzers with a measurement range of 100 to 3000 parts per million. Each tube must feature melted tips to ensure precision and safety during use, and all items must strictly comply with the National Stock Number NSN 6630121893126 and the military packaging standard MIL-STD-129 to ensure uniformity, traceability, and durability in defense logistics. The products are intended for military medical applications and must meet exacting technical and packaging specifications to support reliable operation in field and facility environments. The solicitation, posted on July 20, 2026, with a response deadline of July 27, 2026, is structured as a subcontract under the NAICS code 334510, which classifies it within the Instrument and Laboratory Equipment Manufacturing sector. The contracting activity is managed by the Department of Defense through the Medical Supply Chain FSH, with performance required to be delivered to FPO, ZIP 09588. Although no specific point of contact is listed, the official solicitation can be accessed via the DIBBS portal, indicating this is part of a broader defense procurement process intended to maintain and resupply critical analytical equipment for medical monitoring systems.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to Joint Base Andrews
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS Management
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323113
New
DIBBS
Medical-Grade Packaging and Labeling
Commercial Screen Printing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Disposable Laboratory Wiper Manufacturing
All Other Rubber Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supplier of Physical Therapy Exercise Bands (Medium Resistance, Green Latex, 9in x 2in)A single unit of medium resistance green latex physical therapy exercise bands measuring 9 inches by 2 inches is being procured under a subcontract solicitation issued by the Department of Defense through the Medical Supply Chain FSH. The product must fully comply with FDA regulations for medical devices and adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 labeling requirements to ensure uniformity and traceability within military logistics systems. Delivery is required at Rose Barracks in Germany within five calendar days of contract award, emphasizing urgency and precision in fulfillment. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and falls under NAICS code 339113 for medical equipment and supplies manufacturing. All contractual obligations are bound by strict compliance with federal military standards and timelines.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Nickel-Titanium Alloy for Medical DevicesThe contract seeks a supplier capable of providing medical-grade nickel-titanium (NiTi) alloy specifically for the manufacture of endodontic rotary files, with stringent requirements for full traceability throughout the material’s production lifecycle and mandatory biocompatibility certification to ensure safety for human use. The alloy must meet exacting medical standards to support precision dental instruments used in root canal procedures, with all documentation and quality controls verified and maintained to comply with regulatory expectations for implantable medical devices. The material must be consistently produced under certified processes to guarantee mechanical properties, shape memory characteristics, and corrosion resistance critical to the performance and reliability of the final product. This is a subcontract opportunity posted under the Department of Defense’s Medical Supply Chain FSH, with a response deadline of July 27, 2026, and a NAICS code of 331492 indicating classification under other fabricated metal product manufacturing. The place of performance is designated as FPO, ZIP 96672-4090, indicating potential delivery to military medical facilities or defense-contracted manufacturers. Although no point of contact or set-aside details are provided, the solicitation number SPE2DH26T5305 and public DIBBS portal link confirm the formal procurement process, requiring bidders to submit proposals that fully address documentation, compliance, and supply chain integrity to qualify for award.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Support for Medical ShipmentsThe contract requires the provision of DoD-compliant packaging, labeling, and logistics services for medical supplies destined for naval hospital ships, ensuring full adherence to MIL-STD-2073-1E and DLA RP001 standards. All packaging and labeling procedures must meet stringent military specifications for durability, traceability, and environmental resilience to support operational readiness in maritime environments. The services encompass end-to-end logistics management, including inbound receipt, storage, consolidation, outbound preparation, and shipment coordination to a FPO address with ZIP code 96672-4090, with performance centered on maintaining the integrity and timely delivery of critical medical assets. This is a subcontract under the Department of Defense, classified under NAICS code 493190, and was posted on July 20, 2026, with a response deadline of July 27, 2026. The contract is managed by the Medical Supply Chain FSH office and targets vendors capable of supporting the unique demands of naval medical logistics, including strict compliance with federal defense regulations and the ability to operate within the constraints of maritime deployment timelines and conditions. No set-aside designation is specified, and the point of contact details are not provided, with all submissions and inquiries directed through the designated DIBBS platform link.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Supply of Endodontic Rotary Files (Protaper Gold Rotary Finishing Files)The contract solicits the manufacture and supply of FDA-compliant endodontic rotary finishing files constructed from nickel-titanium alloy, specifically Protaper Gold Rotary Finishing Files, for use in root canal treatments aboard U.S. military hospital ships. These instruments must meet stringent medical device regulations and be suitable for high-precision dental procedures in a deployed maritime environment, ensuring reliable performance under field conditions. The deliverables are intended to support the dental care mission of the Department of Defense, with performance required at the FPO address 96672-4090, indicating shipment to naval vessels operating in the Pacific region. This is a subcontract opportunity under NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector, and is being managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, leaving a limited seven-day window for qualified manufacturers to submit proposals. Bidders must ensure compliance with FDA standards, military specifications for medical devices, and the logistical requirements of delivering sensitive dental instruments to remote, mobile medical facilities. While no set-aside provisions are indicated, participation is open to all eligible subcontractors capable of meeting the technical, regulatory, and delivery timelines.
Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488999
New
DIBBS
FOB Destination Delivery and LogisticsThe contract requires end-to-end logistics and delivery services to APO AE 09227-0000 in Kaiserslautern, Germany, under FOB Destination terms, meaning the vendor assumes full responsibility for transportation, customs, and delivery costs until the goods reach the final destination. The delivery must be completed in compliance with all international shipping regulations and military receipt protocols, with ownership and risk transferring only upon arrival at the assigned APO address. The NAICS code 488999 indicates this is a specialized logistics support service outside standard freight categories, likely involving secure, tracked, and time-sensitive transport for Department of Defense medical supply needs. This subcontract is issued by the Medical Supply Chain FSH under the Department of Defense and was posted on July 20, 2026, with a response deadline of July 27, 2026. The place of performance is strictly defined as the APO box address, requiring precise alignment with U.S. military postal guidelines for overseas delivery. No specific set-aside provisions are listed, and the procuring office information is incomplete, but the solicitation number SPE2DH26T5299 and official DIBBS platform link confirm its legitimacy within federal contracting systems. Vendors must ensure complete compliance with all military logistics standards, including documentation, tracking, and delivery confirmation, as failure to meet FOB Destination requirements may result in rejection or financial liability.
All Other Support Activities for Transportation

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details