CHIP, CARBON MONOXID
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The item is a CHIP, CARBON MONOXIDE detection tube designed for use with an electronic detector tube system, measuring concentrations between 5.0 and 150 parts per million, with each unit consisting of ten capillary tubes for ten separate gas measurements. It is identified by NSN 6630-01-482-4375 and falls under solicitation SPE2DH-26-T-5139, with a procurement quantity of two units. The item is subject to stringent technical and quality requirements referenced in the DLA Master List, and it is classified as a TYPE I (CODE M) medical item with a non-extendable shelf life of 24 months. Delivery to the government must occur within three months of the manufacturing date, and all packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129. Labels must clearly show the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. Packaging must protect the tubes from damage during transit, using commercial containers suitable for safe delivery via common carriers at the lowest possible rate to the specified delivery point in APO, 96260-5479. The item is also subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Additional compliance includes potential handling of covered defense information and adherence to applicable Federal acquisition regulations.
General Info
Agency
NAICS
Place of Performance
UNIT 15479, APO, AP, 96260-5479, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CHIP,CARBON MONOXIDE
FOR USE WITH CHIP-MEASUREMENT-SYSTEM ELECTRONIC DETECTOR TUBE SYSTEM;
RANGE 5.0 TO 150 PPM; 10 CAPILLARY TUBES FOR 10 GAS MEASUREMENTS
UNIT OF ISSUE: EA (EACH)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
SPE2DH-26-T-5139
SECTION B
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-482-4375 Quantity: 2 EA Purchase Request: 7017473526QTY: 2 Delivery: 84 days ADO
