This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CHIP, CHEMICAL, AMMON
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of a chemical chip designed for ammonia detection, part number 6640-01-497-5784, with a unit of issue of each. The chip contains ten measurement capillaries filled with substance-specific reagent systems to eliminate cross-sensitivity and accurately measure ammonia concentrations within a range of 2.0 to 50.0 parts per million. Each chip is factory-calibrated, has a two-year shelf life, and must not have more than four months elapsed between the date of manufacture and delivery to the government. The chip must be labeled with the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. Packaging must comply with commercial standards, using sealed unit containers that protect against damage and exterior shipping containers suited for safe transport at the lowest cost via common carrier. All labeling and marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available from DLA Troop Support. The product must meet technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. The bid solicitation number is SPE2DH-26-T-5333, with a response deadline of July 27, 2026, and delivery is required at Joint Base Andrews, Maryland, within 20 days of award.
General Info
Agency
NAICS
Place of Performance
3424 TENNESSEE AVE, JOINT BASE ANDREWS, MD, 20762, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
CHIP, CHEMICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PROVIDES BEST RESULTS POSSIBLE CAPILLARIES
OF SEVERAL CHIPS HAVE MULTIPLE LEVELS TO HELP
ELIMINATE CROSS SENSITIVITY OR DERIVE A
SPECIFIC MEASUREMENT OF THE TARGETED CHEMICAL
CHIP CONSISTS OF 10 MEASUREMENT CAPILLARIES
FILLED WITH SUBSTANCE SPECIFIC REAGENT SYSTEMS;
GAS TYPE, PART NUMBER AND BATCH NUMBER ARE
PRINTED ON CHIP AND
BARCODE READ BY THE ANALYZER OPTICS
SPE2DH-26-T-5333
SECTION B
CONTAINS INFORMATION ABOUT GAS TYPE, MEASURING
RANGE AND MEASURING TIME REQUIRED FOR COMPLETING THE MEASUREMENT; EACH
CHIP IS CALIBRATED
DURING MANUFACTURING AND IS VALID FOR 2 YEARS;
AMMONIA, RANGE 2.0-50.0 PPM
.
END ITEM NSN 6640-01-497-5784
.
UNIT OF ISSUE:EACH (EA)
.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN FOUR MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-497-5789 Quantity: 1 EA Purchase Request: 7017547711QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS