CHIP, NITROGEN DIOXI
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract specifies the procurement of a single unit of a nitrogen dioxide detection chip with a measuring range of 0.5 to 25 ppm, designed for use with NSN 6630-01-479-2133. Each unit consists of ten tests and must be delivered within five days of award, with the product required to have a 24-month shelf life and no more than three months elapsed between the date of manufacture and delivery to the government. All packaging must comply with commercial standards and be sealed in containers that protect against damage, with exterior shipping containers ensuring safe, cost-effective delivery to the specified point of performance in APO, 09094-3219. Labels must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. The supply must be marked in accordance with Medical Marking Standard No. 1, replacing all references to MIL-STD-129. The procurement is governed by technical and quality requirements from the DLA Master List, and applicable packaging and identification rules as defined in RP001 and RQ011. The solicitation number is SPE2DH-26-T-5089, issued on July 9, 2026, with responses due by July 16, 2026, under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain FSH.
General Info
Agency
NAICS
Place of Performance
UNIT 2497 CP 011 496 371 46 2418, APO, AE, 09094-3219, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CHIP, NITROGEN DIOXIDE, MEASURING RANGE 0.5
TO 25 PPM; 10 TESTS;.
FOR USE W/ 6630-01-479-2133
.
UNIT OF ISSUE EACH (EA)
.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN THREE MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DH-26-T-5089
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-482-4377 Quantity: 1 EA Purchase Request: 7017447494QTY: 1 Delivery: 5 days ADO
