CHIP, PHOSPHINE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The product is a CHIP, PHOSPHINE designed for use with the Dräger CHIP-Measurement-System, containing ten measurement capillaries pre-filled with a reagent specific to phosphine detection, with a measuring range of 20.0 to 500 ppm and a total capacity for ten tests per unit. Each unit is individually packaged and must be shipped in sealed, commercial-grade containers that protect against damage and ensure safe delivery via common carrier at the lowest cost to the specified delivery point. Packaging and labeling must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must include the date of manufacture, expiration date, contract number, and lot number as required by MMS1C. The item has a strict non-extendable shelf life of 24 months, with no more than four months allowed to have passed from date of manufacture to delivery to the government. Storage must be maintained between 5 °C and 25 °C to preserve integrity. The item is identified by NSN 6550-01-530-8370, and bidders must clearly state the source and part number being supplied. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and packaging must adhere to DLA procurement standards. This solicitation, issued under contract number SPE2DS-26-T-223V, requires delivery within five days of award and is managed by the Department of Defense’s Medical Supply Chain organization with primary contact Anh Lam.
General Info
Agency
NAICS
Place of Performance
USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CHIP, PHOSPHINE
FOR USE WITH DRÄGER CHIP-MEASUREMENT-SYSTEM
FEATURES CHIP CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A
SUBSTANCE-SPECIFIC REAGENT DETECTION SYSTEM; MEASURING RANGE IS 20.0-500
PPM; THE TEST CAPABILITY IS 10 TESTS; FOR CMS ANALYZER
UNIT ISSUE: EA (EACH)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DS-26-T-223V
SECTION B
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 4 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
MUST BE STORED AT TEMPERATURE 5 °C TO 25 °C
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-8370 Quantity: 1 EA Purchase Request: 7017447556QTY: 1 Delivery: 5 days ADO
