Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, TRAINING

Active
SPE2DH-26-T-5588Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of a Simulation Training Chip designed for use with Chip Measurement Systems, identified by NSN 6630-01-482-4380, under solicitation SPE2DH-26-T-5588. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, and packaging must adhere to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport at the lowest freight rate, with proper markings including the date of manufacture, expiration or retest date, and contract or lot number. The product has a 24-month shelf life, and no more than three months may have passed between manufacture and government delivery. Labeling must follow the latest revision of MMS1C, and all information must be clearly visible on the packaging. As a covered defense item, the contract imposes requirements related to the handling of sensitive information and mandates that government identification be removed from non-accepted supplies. Packaging must meet DLA’s procurement standards and align with commercial practices as specified. The item is intended for medical acquisition use, and delivery is required within five days of award. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, under NAICS code 423450. Point of contact is Tina Vu of the Department of Defense’s Medical Supply Chain FSH, reachable via email and phone provided in the contract data. Full compliance with technical, quality, packaging, and labeling standards is mandatory for acceptance.

General Info

Single Simulation Training Chip, NSN 6630-01-482-4380, 24-month shelf life, medical packaging, delivery in five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5588.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,TRAINING
CHIP, TRAINING
SIMULATION TRAINING CHIP; FOR USE WITH CHIP MEASUREMENT SYSTEMS (CMS)
ELECTRONIC DETECTOR TUBE SYSTEM
UNIT OF ISSUE EA (EACH)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
SPE2DH-26-T-5588
SECTION B
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-482-4380 Quantity: 1 EA Purchase Request: 7017647928QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
DRAPE, SURGICALThe surgical drape is a nonwoven fabric item measuring 75 inches in length and 57 inches in width, individually packaged, fan-folded, and colored blue, designed for use in sterile surgical environments. It is supplied in units of issue as a package containing twenty drapes each, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is regulated by the FDA, and buyers are required to submit a referral in EBS with full manufacturer and bidder details for verification. Shelf life is strictly defined at 36 months with no extendability, and the item is classified as a TYPE I (CODE Q) item under RS001. The manufacturer is Cardinal Health 200, LLC, with part number 9349, and the NSN is 6530-01-173-2311. Delivery must be made within five days to the destination specified as JBER, Alaska, under FOB destination terms, with no tolerance for quantity variance. Inspection and acceptance occur at the point of delivery, and packaging must conform to MIL-STD-2073-1E. The solicitation number is SPE2DH-26-T-5593, issued by the Department of Defense through the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTIONThe contract specifies the procurement of sterile, individually sealed disposable urine collection bags with a 2000 mL capacity, each equipped with a plastic input and drain tube assembly, an anti-reflux valve integrated into the drip chamber, and a hanger for secure attachment to beds, chairs, or patients. The product must meet strict medical standards, including compliance with FDA Regulation 876.5250 as a Class II device, requiring registration, listing, proper labeling, and adherence to Good Manufacturing Practices, even if a 510(k) submission is not mandatory. Each unit must have a shelf life of 60 months, with no more than nine months elapsed between manufacturing and delivery to the government. All containers must be clearly marked with the lot or control number and the manufacture date preceded by “MFD.” Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include commercial unit containers that protect against damage, packed in appropriate shipping containers to ensure safe, cost-effective delivery to the designated destination. The contract calls for delivery of three packages (each containing 20 units), totaling 60 bags, under NSN 6515-01-059-2473, with a unit price of $3.00 and total contract value of $9.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance. Inspection and acceptance occur at the point of delivery, and packaging must conform to MIL-STD-2073-1E. The supplier must be a registered entity such as The Kendall Company LP DBA or Cardinal Health 200, LLC, both offering part number 6208. The procurement is governed by DLA’s technical and quality requirements as outlined in the Master List, and all documentation must align with DLA’s eProcurement policies. Covered defense information may apply, and bids must include the exact source, part number, and manufacturer details for FDA and procurement verification. The solicitation is issued under SPE2DS-26-T-281R for delivery to Fort Bliss, Texas.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
ATROPINE SULFATE INAtropine Sulfate Injection, USP, is a sterile, nonpyrogenic, preservative-free, and non-DEHP product supplied in a 5 mL single-dose syringe with a 20-gauge by 1.5-inch protected needle featuring a male Luer lock adapter. Each milliliter contains 0.1 mg of atropine sulfate monohydrate and 9 mg of sodium chloride, resulting in a total of 0.5 mg of atropine per syringe. The medication is indicated for subcutaneous, intramuscular, or intravenous administration and is labeled RX only. The product must be stored at controlled room temperature between 20°C and 25°C (68°F to 77°F) and has a non-extendable shelf life of 24 months. Packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all DLA Master List of Technical and Quality Requirements take precedence over commercial packaging standards. The product is regulated by the FDA and is supplied by Pfizer Inc with NDC code 00409-4910-34. The contract, issued under solicitation number SPE2DP-26-T-4325, requires delivery of one pallet (PG) containing ten units to Fort Bragg, North Carolina, within 20 days of order placement, FOB destination. No quantity variance is permitted, and inspection and acceptance occur at the delivery point. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, unless overridden by DLA requirements. All packaging must be marked and labeled per DLA specifications, palletized as per RP001, and shipped via traceable means, excluding parcel post. The delivery is mandated for July 29, 2026, with the contract awarded to the Department of Defense, Medical Supply Chain Pharm FSA, and all technical, quality, and packaging specifications are governed by the DLA Master List in effect on the solicitation issue date. A referral must be sent via EBS to confirm bidder and manufacturer details prior to award.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
LIDOCAINE HYDROCHLOLidocaine Hydrochloride and Epinephrine, USP, is a parenteral injectable pharmaceutical product containing a 2 percent concentration of lidocaine hydrochloride and a 1:50,000 dilution of epinephrine bitartrate, supplied in 1.7 mL single-dose cartridges. Each unit of issue consists of a package of 50 cartridges, organized in five blisters of ten per cardboard box. The product must be stored at controlled room temperature below 25°C (77°F), protected from light, and must not be frozen. It is regulated by the FDA and has a non-extendable shelf life of 18 months as a Type I (Code K) item. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure the product is sealed, protected from damage, and shipped in suitable commercial containers to guarantee safe delivery. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition type. This procurement is issued under Solicitation Number SPE2DP-26-T-4333 by the Department of Defense’s Medical Supply Chain Pharm FSA. One pack (PG) of 50 cartridges is required, with a delivery requirement of five days after award, delivered FOB destination to JBER, Alaska. The NSN is 6505-01-576-2767 and the purchase request number is 7017631646. The product must be supplied by an approved manufacturer with part number NDC66312-0181-16 or equivalent, and shipment must adhere to all DLA packaging standards, including commercial packaging for medical items and specific marking requirements. No quantity variance is permitted, and inspection and acceptance occur at the destination. The required delivery date is July 29, 2026, and the response deadline for the solicitation is August 3, 2026. The contracting officer must submit a referral in EBS for confirmation, including manufacturer and bidder details. Transportation and delivery logistics are governed by DLA procedural notes C19 and C20, with the point of contact for inquiries being Timothy McCauley.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-REThe contract specifies the procurement of 2 units of Omeprazole Extended-Release Capsules, 20 mg delayed-release, packaged in 90-count bottles, with each unit identified by the U/I "BT" and corresponding to 90 tablets. The product must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with labeling and packaging strictly adhering to Medical Marking Standard No. 1, superseding MIL-STD-129. Each bottle must besealed and protected within appropriate commercial containers designed to prevent damage during transit, and all packaging must comply with ASTM D3951 unless the material is deemed hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. The drug must have a minimum of 21 months of shelf life remaining at the time of delivery to the first government activity, as the full shelf life is 24 months and non-extendable. The manufacturer is Sandoz Inc., with NDC 00781-2868-92, and the item is regulated by the FDA, requiring a referral in EBS for confirmation prior to award. Delivery is FOB destination to Fort Stewart, Georgia, within 20 days of contract award, and shipment must be via the fastest traceable means—parcel post is prohibited. The NSN is 6505016247068, and the contract is under solicitation SPE2DP-26-T-4351 with a required delivery date of July 30, 2026. All packaging, marking, and palletization must follow DLA’s RP001 specifications, and the unit of issue and quantity per unit pack are fixed as specified.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
TOLNAFTATE CREAMTolnaftate Cream, USP, is a 1% topical antifungal cream supplied in tubes containing 15 grams each, with the unit of issue being a tube (TU). The product has a total shelf life of 36 months, and at the time of receipt by the first government activity, there must be a minimum of 31 months of remaining shelf life. It must be stored at controlled room temperature between 20-25°C (68-77°F), with short-term excursions allowed between 15-30°C (59-86°F) in accordance with USP standards. The cream is manufactured by Taro Pharmaceuticals U.S.A., Inc., with NDC 51672-2020-01, and is regulated by the FDA. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to RA001, RP001, RQ001, RS020, and RS001, which mandate compliance with FDA and DoD packaging, labeling, and shelf-life protocols. The product must be packaged in accordance with Commercial Packaging Standards as specified in the procurement document, with each unit sealed in a protective container and shipped in suitable exterior containers to ensure safe delivery via commercial carrier at the lowest rate to the designated destination. Packaging and marking must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, and all labels must include required government identifiers. The shipment of 20 tubes is to be delivered FOB destination within 20 days, with no quantity variance permitted. Transportation must be via traceable means, excluding parcel post, and the item is to be delivered to the specified location in Bogalusa, Louisiana. The contract requires confirmation through EBS referral to the product specialist, ensuring proper vendor and manufacturer validation prior to award, and all documentation must comply with DLA’s acquisition and logistics directives, including palletization and hazardous material standards where applicable.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
PAD, SPLINE SPLINTThe contract is for the procurement of disposable PAD, SPLINE SPLINT units designed for use on the forehead restraint strap to prevent contamination from body fluids. Each package contains ten pads and is associated with the SK-300 SPLINE SPLINT II TRANSPORT SYSTEM, identified by the NSN 6530-01-265-3583, with a unit of issue of one package per ten units. The product is governed by specific technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identifiers R and I numbers, and must comply with DLA packaging regulations and protocols for removing government identification from non-accepted supplies. Bidders are required to clearly state the source and part number being supplied, with the specified NSN for this item being 6530-01-507-9533, and the quantity requested is one package under purchase request 7017631805. Delivery must be completed within 20 days after order, and the solicitation is issued under contract number SPE2DH-26-T-5560, with responses due by August 4, 2026. The procurement falls under NAICS code 423450, is managed by the Department of Defense through the Medical Supply Chain FSH, and the performance location is Fort Stewart, Georgia. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap to secure the shoe in place, featuring a 0.750 inch sole, size small, and black color made from synthetic rubber with a non-slip surface. These items are packaged in units of 72 pairs per package and are identified by NSN 6532-01-469-7517. The order quantity is one package, with a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5567, posted on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory. The packaging must meet DLA packaging standards, and non-accepted supplies must have all government identification removed. The procurement is under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PERSO
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BASIN, WASHThis contract specifies the procurement of a 7-quart capacity, natural color basin made of corrosion-resistant steel for use in medical applications, identified by NSN 6530-00-771-0105 and associated part numbers from multiple suppliers including Medical Action Industries, Cardinal Health, VWR, and Polar Ware. The item is not regulated by the FDA and must be packaged in accordance with commercial standards as outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and units must be sealed to prevent damage during transit. Each unit must be packed in suitable shipping containers capable of safe delivery by common carrier at the lowest possible rate to the designated destination. The delivery is required within 20 days FOB destination, with no quantity variance permitted, and inspection and acceptance occur at the delivery point. The item is to be delivered to the 1AD Sustainment Brigade SSA at Fort Bliss, Texas, and must be shipped by traceable means excluding parcel post. The contract requires bidders to specify the manufacturer’s name and part number being offered and mandates that all packaging meet the DLA Packaging Requirements for Procurement, including palletization standards. The solicitation number is SPE2DH-26-T-5569, with a response deadline of August 4, 2026, and the required delivery date is July 30, 2026. The U.S. Department of Defense, through DLA Troop Support, is the issuing authority and has designated the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
CALCIUM HYDROXIDE PASTCalcium Hydroxide Paste Dental is a radiopaque, antibacterial endodontic dressing with a high pH level of 12.5, supplied in 1.2 mL syringes as part of the Ultracal XS Kit. Each kit contains four 1.2 mL syringes and twenty assorted 29GA Navitip tips, with five of each length, designed for precise delivery during root canal treatments. The material is corrosive and must be stored at room temperature. The item has a non-extendable shelf life of 24 months and is classified as a Type I (Code M) item under DLA specifications. Packaging must comply with SPE2DH-26-T-5584 standards and applicable hazardous materials regulations including 49 CFR and ICAO guidelines. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6520-01-686-3975, with a purchase quantity of six kits, a delivery requirement of five days after delivery order, and a solicitation issued under contract number SPE2DH-26-T-5584 with a response deadline of August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance and contact details centered in Suffolk, VA.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 453998
New
DIBBS
MANIKIN, RESCUE, SPECThe contract specifies the procurement of two rescue manikins, each standing five feet five inches tall and weighing 105 pounds, constructed with a cast vinyl body and a five-sixteenth inch steel frame, featuring articulated joints and anatomically distributed weight to simulate human movement and balance for training purposes. The unit of issue is each, and the items must comply with stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced via RQ and RP identifiers, ensuring adherence to federal procurement standards. The manikins are issued under NSN 6910-01-362-2996, with delivery required within 20 days of award, and the purchase is tied to request number 7017305237. The solicitation, issued under SPE2DH-26-T-5602, was posted on July 28, 2026, with responses due by August 4, 2026, and falls under the NAICS code 453998. The contracting activity is managed by the Department of Defense’s Medical Supply Chain FSH, with performance taking place at FPO, ZIP 96657-2615, and primary point of contact being Joseph Rucci via email and phone provided. All non-accepted supplies must have government identification removed in accordance with RQ011, and the applicable version of the DLA Master List is controlled by the solicitation issue date.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST TUBE, BLOOD COLLECThe contract specifies the procurement of 2 packages of glass blood collecting test tubes, each package containing 100 units, for use exclusively with the QBC STAR centrifugal hematology analyzer. Each unit must have a shelf life of nine months, and no more than two months may have elapsed from the date of manufacture to the date of delivery to the government. Labels on the product must include the NSN 6640-01-587-9896, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number with lot number. The items are not regulated by the FDA. Packaging must comply with Commercial packaging standards and Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a container that prevents damage and breakage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Norfolk, Virginia. Bidders must clearly state the source and part number being supplied. The solicitation incorporates technical and quality requirements from the DLA Master List, and applicable provisions include packaging, removal of government identification from non-accepted supplies, and potential coverage under defense information regulations. Delivery is required within 20 days of award under solicitation SPE2DH-26-T-5377, with responses due by July 28, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, LThe contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, constructed from borosilicate glass, featuring an outer diameter of 51 millimeters and an internal height of 360 millimeters. The item is identified by NSN 6640-01-459-4425 and is to be delivered within 20 days of award under purchase request 7017665906. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DH-26-T-5598, issued on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96632. Tina Vu of DLA serves as the primary point of contact, reachable via email and phone listed in the documentation. The NAICS code 339113 confirms the classification for laboratory glassware manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
AMALGAM ALLOY, CAPSULE,ZENITH PREMIUM DISPERSED PHASE AMALGAM ALLOY, CAPSULE, DENTAL is a high-strength, condensable dental alloy designed for long-lasting restorations with superior handling characteristics, available in regular and fast-setting formulations, supplied in units of 50 capsules per batch. The item is identified by NSN 6520-01-730-6230 and is procured under solicitation SPE2DH-26-T-5583 with a required delivery within five days of award. It carries a non-extendable shelf life of 120 months, in compliance with RS030 requirements, and is subject to DLA’s packaging and hazardous material standards as outlined in RD003, RP001, and RQ034. A current Material Safety Data Sheet (MSDS) must accompany each shipment and be electronically submitted via DLA.MSDS@DLA.MIL with the required cover sheet P-75 containing logistics data. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The item is categorized under NAICS 339114 and is procured by the Department of Defense’s Medical Supply Chain FSH through the DLA, with Tina Vu as the primary point of contact. Removal of government identification from non-accepted supplies is required per RQ011, and the technical and quality specifications referenced are governed by the DLA Master List effective on the solicitation or award date.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTICThis contract pertains to the procurement of POINT ENDODONTIC GUTTA PERCHA POINTS, specifically model 120S, which are color-coded, assorted in sizes 45 to 80, and measure 30 millimeters in length, supplied in boxes of 120 units each. The item is identified by NSN 6520-01-643-3521 and is being requested in a single box quantity under purchase request 7017649745, with a delivery requirement of 20 days ADO. The solicitation, issued under number SPE2DH-26-T-5606, was posted on July 28, 2026, with proposals due by August 4, 2026, and falls under NAICS code 456199 for other health care services. The contracting authority is the Department of Defense, through the Medical Supply Chain FSH, with delivery to APO 09094-3219. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Covered defense information may apply, and bidders must specify the source and part number being offered. Government identification must be removed from non-accepted supplies, and bids must be submitted with full product details to meet procurement compliance.
All Other Health and Personal Care Retailers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL SURGERYThe contract is for the procurement of diamond burs used in dental surgery, specifically the BrioPrep Coarse Modified Flat-End Taper model identified by part number BRIO6845KR.31.025, supplied in sterile packages of 25 units per package. The item is identified by NSN 6520-01-717-0597 and requires delivery within five days of order placement. The burs feature a 19mm standard shank and a head size of 0.25mm, meeting technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA procurement standards, and suppliers must ensure removal of government identification from non-accepted items. The solicitation is issued under contract number SPE2DH-26-T-5591 with a response deadline of August 4, 2026, and the place of performance is listed as Suffolk, VA, 23435-5000. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact information. Bidders must clearly specify the source and part number being offered and acknowledge that covered defense information may apply to this procurement.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details