Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CHIP, TRAINING

Closed
SPE2DH-26-T-5444Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The contract pertains to the procurement of a single unit of a simulation training chip designed for use with chip measurement systems, identified by NSN 6630-01-482-4380. The item is classified as an electronic detector tube system with a unit of issue specified as each. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. The product must comply with DLA packaging standards, including commercial packaging as specified in the procurement document, with each unit sealed in a container that protects against damage and is shipped in exterior containers suitable for safe delivery via common carrier at the lowest cost. All packaging and labeling must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must clearly display the date of manufacture, expiration or retest date, and the contract number or lot number. The item must have a shelf life of 24 months, with no more than three months having passed from the date of manufacture to the date of delivery to the government, and all shelf life markings must adhere to the latest revision of MMS1C. The acquisition is part of a federal solicitation issued by the Department of Defense under contract number SPE2DH-26-T-5444, with a response deadline of July 30, 2026, and a delivery requirement of five days after order award. The point of contact for the solicitation is Ryan Sullivan of DLA Troop Support.

General Info

Procurement of one simulation training chip, NSN 6630-01-482-4380, with 24-month shelf life, DLA packaging, and five-day delivery.

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

Place of Performance

USA

Set-Aside

NONE

Documents

1

RFQ SPE2DH-26-T-5444 Medical Supply Chain

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
CHIP,TRAINING
CHIP, TRAINING
SIMULATION TRAINING CHIP; FOR USE WITH CHIP MEASUREMENT SYSTEMS (CMS)
ELECTRONIC DETECTOR TUBE SYSTEM
UNIT OF ISSUE EA (EACH)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
SPE2DH-26-T-5444
SECTION B
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-482-4380 Quantity: 1 EA Purchase Request: 7017447580QTY: 1 Delivery: 5 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROS
Solicitation # SPE2DH-27-T-0287
Solicitation SPE2DH-27-T-0287 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscopy mounting medium, identified by NSN 6640-00-935-1485. The required material is a synthetic resin with a 60 percent solution of toluene or xylene, featuring a 1.52 refractive index when dry and a one-hour setting time. The unit of issue is a one-ounce bottle, which must have a shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery. Delivery is required within 69 days after order, with the destination specified as the USA Med Materiel Ctr Kore. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Labels must include the NSN, manufacturer and CAGE code, contract or lot number, and relevant dates of manufacture or expiration. Because the material is hazardous, the contractor must comply with 49 CFR, 29 CFR, and the Hazard Communication Standard, providing a signed certification of package configuration on the DD Form 250. Additionally, the contract incorporates cybersecurity requirements via DFARS 252.204-7012 and requires the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations by November 3, 2026, and provide a complete data package if proposing alternate parts.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS