Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CIRCUIT BREAKER

Active
SPE7M1-26-U-4925Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 90 circuit breakers with NSN 5925-01-539-6972 under solicitation SPE7M1-26-U-4925, classified as a commercial off-the-shelf item requiring full data package submission from alternate offerors including documentation for both approved and alternate parts. The delivery deadline is set for 77 days after contract award, with responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with inspection sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise specified; zero non-conformances are required unless explicitly stated otherwise in the contract. Attributes are to be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics, with unspecified attributes treated as major. Government identification must be removed from non-accepted supplies. The contracting office is the Department of Defense’s Maritime Supply Chain under NAICS code 335313, with Bryan Fair as the primary point of contact.

General Info

Procure 90 circuit breakers, NSN 5925-01-539-6972, deliver in 77 days, zero non-conformances, MIL-STD-1916, AQLs VII IV II.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4925.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT BREAKER
CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5925-01-539-6972 Quantity: 90 EA Purchase Request: 1000238926QTY: 90 Delivery: 77 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
DIBBS
ABSORBER, OVERVOLTAG
Solicitation # SPE7M1-26-U-5030
The contract specifies the procurement of 46 units of an absorber designed for overvoltage protection, identified by NSN 5920-01-503-2533 and linked to purchase request 1000238984. The item must comply with strict restrictions regarding mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware or supplies unless used functionally in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and equipped with a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Packaging must meet DLA’s RP001 requirements, and all technical and quality standards referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M1-26-U-5030 with a response deadline of August 19, 2026, and requires delivery within 94 days after award. The primary point of contact is Bryan Fair at the Maritime Supply Chain under the Department of Defense, and the NAICS code is 335313. For non-accepted supplies, the alternate offeror must provide a complete data package including documentation for both approved and alternate parts.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-5042
The contract is for the procurement of circuit breakers under solicitation SPE7M1-26-U-5042, issued by the Department of Defense through the Maritime Supply Chain office. The item, identified by NSN 5925-01-562-0259 and part numbers CA3-X0-17-677-321-D and IELHK111-1-63-60.0-01-V, has a required quantity of 49 units with a unit price of $49.00, resulting in a total price of $2,401. Delivery is required within 74 days FOB origin, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination. All packaging and labeling must comply with MIL-STD-129 and DLA’s Packaging Requirements for Procurement, with hazardous materials following Fed-Std-313 and TQ requirement IP025, and non-hazardous items meeting ASTM D3951—though DLA’s Master List of Technical and Quality Requirements takes precedence over any commercial standards. Palletization must adhere to RP001 specifications, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is classified under NAICS code 335313. Point of contact for inquiries is Bryan Fair, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-4970
The contract mandates the procurement of a circuit breaker specified as MS24510-B-10, which must be manufactured by a qualified source listed on the Qualified Products List; commercial equivalents are strictly prohibited. All components must comply with the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers incorporated by full text. The item is classified as a critical application and is subject to stringent material restrictions, including a complete prohibition on intentional use of mercury or mercury-containing compounds except in narrowly defined exceptions such as batteries, fluorescent lamps, sensors, and weapon systems, all of which require secondary containment and shock-proof design per NAVSEA 5100-003D. Additionally, Class I ozone-depleting chemicals are forbidden in any supplied goods, replacing any conflicting specification requirements unless explicitly authorized. The product must be packaged and labeled in strict accordance with MIL-STD-129 and DLA Packaging Requirements, with hazardous materials conforming to Fed-Std-313 and IP025, or commercially packaged under ASTM D3951 if non-hazardous, though DLA requirements override all others. Palletization must follow RP001 guidelines, and the unit of issue is each (EA) with a fixed quantity of 83 units, no variance allowed. Delivery is FOB origin within 88 days, with inspection and acceptance occurring at destination. The supplier must hold CMMC Level 2 certification through a certified third-party assessment organization. The solicitation number is SPE7M1-26-U-4970 with an NSN of 5925-01-222-5033, and the contract is managed by the Department of Defense’s Maritime Supply Chain under a direct DLA procurement arrangement for CONUS delivery.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-4892
The contract pertains to the procurement of 34 circuit breakers under NSN 5925-01-547-0005, with a delivery requirement of 71 days after award. This solicitation, identified as SPE7M1-26-U-4892, is a total small business set-aside under FAR 19.5 and falls under NAICS Code 335313, indicating classification within the electrical equipment manufacturing sector. All supplies must comply with DLA packaging requirements and technical/quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision control depending on the acquisition type and solicitation amendments. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except for approved exceptions such as functional mercury in batteries, fluorescent lamps, sensors, weapon systems, or chemically specified reagents per NAVSEA 5100-003D. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary to prevent leakage. The alternate offeror must submit a complete data package including technical specifications for both the primary and alternate parts. The solicitation is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with Bryan Fair listed as the primary point of contact and responses due by August 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-Q-0834
The contract specifies the procurement of 10 circuit breakers with NSN 5925-01-035-3151, supplied by Sensata Technologies, Inc. under solicitation SPE7M5-26-Q-0834, with a firm delivery deadline of 92 days after award. The quantity is strictly fixed with zero variance allowed, and both inspection and acceptance occur at the destination. The supply must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override all other standards such as ASTM D3951; if the item is non-hazardous, it must be commercially packaged under ASTM D3951 but only if not superseded by a DLA requirement, and all packaging and labeling must follow MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement. The delivery is FOB origin, and shipping must be conducted via the fastest traceable means, explicitly prohibiting parcel post. The item is to be shipped to a designated Department of Commerce NOAA facility in Lakeland, Florida, with government tracking identifiers included for logistics and accountability. All technical and quality specifications are governed by referenced R or I numbers in the DLA Master List, and the applicable revision is determined by the solicitation issue date. The point of contact for the contract is Chance Nicklaus of the Department of Defense’s Active Devices Division, and the item is classified under NAICS code 335313 for electrical equipment manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-366X
This contract specifies the procurement of a single circuit breaker with NSN 5925-01-603-7450 and part number TS3L200MW from ABB CONTROL INC, under solicitation SPE7M5-26-T-366X. The item is required in a quantity of one unit, to be delivered within 20 days to MCBH Kanaohe Bay, HI, with delivery terms FOB origin and zero variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and containerization, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA packaging requirements. The unit of issue is each, and the price is listed as $1.00 per unit. The government delivery point is M00174 at the Distribution Management Office, and the shipment must reference transport instructions from DLAD Proc Note C19 and C20. The required delivery date is July 31, 2026, and the contract incorporates technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation issue date. The NAICS code is 335313, and the contract is managed by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5701
The contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-691-9749 and part number 6FH 004 570-131, supplied by HELLA INC DBA 1CW22, in a quantity of two units. Delivery is required within ten days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The units must be packaged per DLA-specific standards, prioritizing the DLA Master List of Technical and Quality Requirements over general commercial standards like ASTM D3951; if hazardous under FED-STD-313, packaging must comply with TQ requirement IP025, otherwise adherence to MIL-STD-129 for marking and labeling is mandatory. Palletization must follow RP001 guidelines, and the use of Class I ozone-depleting substances in any phase of manufacture or processing is strictly prohibited without explicit written approval from the contracting officer, though exceptions apply to commercial items as defined in FAR 11.001 or part-numbered-only items. Shipping must utilize traceable freight methods—parcel post is forbidden—and must be directed to the designated distribution management office at Camp Lejeune, NC, with the RDD code E and project identifier TP 2. The required delivery date is July 31, 2026, with a solicitation response deadline of August 17, 2026, issued under solicitation SPE7M8-26-T-5701 by the Department of Defense’s Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M1-26-U-4873
The contract specifies the procurement of a cartridge fuse with the part number F15A250V15AS, compliant with MIL-PRF-15160 revision H and later revisions, requiring silver-plated end caps as defined by the "S" designation in the part number. No commercial substitutes are permitted, and the fuse must be marked strictly according to paragraph 3.14 of the specification. The item is classified as a critical application and is subject to qualification requirements under a Qualified Products List (QPL) or Qualified Manufacturers List (QML), meaning only qualified sources may supply components. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the fuse or its packaging, except for approved functional uses such as batteries or instrumentation, and portable devices containing mercury must include a secondary containment system per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in manufacturing, cleaning, or any related process is forbidden without explicit written approval from the contracting officer. Packaging and preservation must conform to MIL-STD-2073-1E with preservation method 41, and all marking must comply with MIL-STD-129 without special codes. Packaging materials and processes must be free of mercury. Delivery is required FOB origin within 113 days for a total of 1,146 units, with zero quantity variance allowed. Inspection and acceptance occur at destination. The contract is administered under solicitation SPE7M1-26-U-4873, issued by the Department of Defense's Maritime Supply Chain, with primary point of contact Bryan Fair.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-4927
The contract is for the procurement of 108 circuit breakers identified by NSN 5925-01-609-2698 under solicitation SPE7M1-26-U-4927, with a required delivery within 50 days after order placement. The solicitation is a total small business set-aside under FAR 19.5, targeting NAICS code 335313, and is managed by the Maritime Supply Chain under the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The alternate offeror must submit a complete data package including details for both the approved and alternate parts. Government identification must be removed from any non-accepted supplies, and all submissions are to be made through the DIBBS platform, with inquiries directed to Bryan Fair at the provided contact details. The response deadline is August 19, 2026, and the solicitation was posted on August 4, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
COVER, CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-5008
The contract pertains to the procurement of 45 units of a circuit breaker cover identified by NSN 5925-01-556-0164 under solicitation SPE7M1-26-U-5008, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. The requirement is a total small business set-aside under NAICS code 335313, with responses due by August 19, 2026, and delivery expected within 63 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment incorporates a later revision. The alternate offeror must submit a complete data package including documentation for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and all submissions must comply with DLA packaging standards. Primary point of contact is Bryan Fair, reachable via email and phone listed in the contract data.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5699
The contract pertains to the procurement of a single unit of a switch and toggle component identified by part number 6FH 004 570-571 and NSN 5930-01-691-9745, with a required delivery within ten days of award. The item must be delivered FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply strictly with DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging must also adhere to RP001 DLA packaging standards, with unit of issue and quantity per unit pack as specified. Shipments must be sent via traceable freight to the specified destination at Camp Lejeune, North Carolina, using the freight shipping address, and parcel post is strictly prohibited. The purchase request number is 7017726966, with an original required delivery date of July 31, 2026, and the contract was issued under solicitation SPE7M8-26-T-5699 under the NAICS code 335313. The point of contact is Dondiego Boler, and the contract requires compliance with all applicable DoD and DLA technical specifications, which supersede any general commercial standards.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M0-26-T-028G
The contract pertains to the procurement of 10 circuit breakers identified by NSN 5925-01-105-0549 under Purchase Request 7017719792, with a required delivery within five days of award. The solicitation, issued under number SPE7M0-26-T-028G, was posted on August 4, 2026, and responses are due by August 17, 2026. Technical and quality requirements referenced in this procurement are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. All supplies must comply with DLA packaging requirements and the removal of government identification from non-accepted items is mandated. The place of performance is specified as APO with ZIP code 96368-5160, and the contracting activity falls under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys. Point of contact for inquiries is Audrey Acuna, reachable via email and phone listed in the contract data. The NAICS code 335313 indicates the product category as Electrical Equipment and Component Manufacturing, and the contract type is a federal solicitation issued through the DIBBS system.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334220
New
DIBBS
SEAL, WAVEGUIDE
Solicitation # SPE7M1-26-U-4876
The contract pertains to the procurement of a SEAL, WAVEGUIDE item with NSN 5985-01-273-2187 and part number 2904471-1, supplied by Raytheon Company under a total small business set-aside. The requirement is for twenty units to be delivered FOB origin within 156 days, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and markings per MIL-STD-129 without special identifiers. The item is classified as a critical application and must adhere to stringent environmental and safety standards: the use of ozone-depleting substances is strictly prohibited unless explicit written approval from the contracting officer is obtained, and mercury or mercury compounds are banned from direct contact with the hardware except in narrowly defined exceptions such as functional batteries or specified instruments, which must include secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and cybersecurity requirements mandate a CMMC Level 2 self-assessment. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances allowed unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract falls under DLA Direct, CONUS, and the unit of issue is each (EA), with pricing and contract details tied to purchase request 1000238939. All provisions are subject to the DLA master document revision effective on the solicitation issue date, and the solicitation is set aside for small business concern under NAICS code 334220.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M1-26-U-5045
The contract pertains to the procurement of 11 backshells, electrica, with NSN 5935-01-662-6813, under solicitation number SPE7M1-26-U-5045, issued by the Department of Defense through the Maritime Supply Chain. The requirement mandates compliance with DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issuance or award date depending on acquisition size. The offeror must provide a complete data package for both the approved and alternate parts, as no specific data is available, and must adhere to government directives regarding the removal of government identification from non-accepted supplies and physical identification or bare item marking. Delivery is required within 94 days of award, and the solicitation closes on August 19, 2026, with responses due by that date. The primary point of contact is Bryan Fair, reachable via email and phone, and further details are accessible through the DIBBS portal. The NAICS code 334417 classifies this as an electrical equipment manufacturing activity, and the contract is open to federal suppliers under a standard procurement process without a specified set-aside classification.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M1-26-U-5046
The contract pertains to the procurement of a shell electrical connector identified by NSN 5935-01-673-8169 and part number 30-334RNJD, with a quantity of 51 units. The item is designated as a critical application and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which govern all aspects of compliance including sampling, marking, and packaging. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Mandatory compliance includes adherence to MIL-STD-129 for marking and labeling, and packaging must conform to RP001 DLA Packaging Requirements, with hazardous materials subject to FED-STD-313 and IP025 standards while non-hazardous items must meet ASTM D3951, though DLA requirements override ASTM. The use of any Class I ozone-depleting substances is strictly prohibited in manufacturing or processing unless explicit written approval from the contracting officer is obtained. The item must be delivered FOB origin within 36 days with no tolerance variance in quantity, inspected and accepted at destination. Only approved sources may be submitted, and any change in part number or superseding item requires prior documentation and approval from the original manufacturer. The unit of issue is each (EA) and the total price is based on $51.00 per unit, with delivery assigned under DLA Direct CONUS coverage. All contractual obligations supersede general commercial standards where conflicts arise, and compliance with DLA’s master list is absolute.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336419
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M1-26-U-4880
The contract is for a heater, thermal release item identified by NSN 5999-00-504-9617 and partial numbers 9104H3926 and 167576 from DRS Naval Power Systems Inc and Northrop Grumman Systems Corporation respectively. It is a small business set-aside solicitation under contract number SPE7M1-26-U-4880 with a total quantity of 74 units at a unit price of $74.00, for a total value of $5,476. Delivery is required FOB origin within 118 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E using method 41 for preservation, with materials specified for wrapping and containment as defined. Marking must adhere to MIL-STD-129 with no special marking codes applied. The item is classified as a critical application and must not contain intentionally added mercury or mercury compounds, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. The contract falls under a DLA Direct, CONUS coverage type and is part of the Department of Defense’s Maritime Supply Chain procurement efforts.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-U-4926
The contract is for the procurement of a transformer, power, under solicitation SPE7M1-26-U-4926, with a total quantity of 27 units at a unit price of $27.00, for a total price of $729.00. The item is identified by NSN 5950-01-562-1374 and part number 500K3296, and is subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must comply with RP001, MIL-STD-129 labeling, and Fed-Std-313 guidelines, requiring commercial packaging if non-hazardous or specific hazardous material handling if applicable. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with a 130-day delivery window, and inspection and acceptance occur at the destination. This is a total small business set-aside under NAICS code 335311, issued by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the point of contact. The solicitation opened on August 4, 2026, and responses are due by August 19, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M1-26-U-5023
The contract pertains to the procurement of electrical grounding strips under solicitation SPE7M1-26-U-5023, with a total quantity of 45 units at a unit price of $45.00, totaling $2,025.00. The item is identified by NSN 5999-01-308-8645 and is classified as a small business set-aside under NAICS code 334413. Delivery is required within 146 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including marking per MIL-STD-129 without special markings, and palletization in accordance with specified DLA standards. Hazardous materials packaging is governed by IP025, and mercury or mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, sensors, weapons, or chemically specified reagents by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification levels. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with the controlling revision determined by the solicitation or award date. The contract is issued by the Department of Defense’s Maritime Supply Chain under the DLA Direct, CONUS delivery model, and includes multiple approved suppliers offering the same part number.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M1-26-U-4973
The item is a radio frequency interference filter with NSN 5915-00-828-8336, quantity of 26 units, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item cannot be disclosed or transferred to foreign persons, regardless of location, and requires prior authorization from the Department of State or Department of Commerce. Export control obligations extend to foreign national employees and subsidiaries of U.S. companies. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. Compliance with DFARS 252.225-7048 is required. The request is part of a small business set-aside solicitation issued by the Department of Defense under solicitation number SPE7M1-26-U-4973, with a response deadline of August 19, 2026, and a delivery requirement of 120 days after delivery order. The contracting office is the Maritime Supply Chain, with Bryan Fair as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FREQ
Solicitation # SPE7M1-26-U-5010
This contract pertains to the procurement of an audio frequency transformer identified by NSN 5950-01-182-2518 and designated as a commercial item, with three approved manufacturer part numbers: 9-305-5 by Automation Products Group, Inc., C8839-5 by Lockheed Martin Corporation, and X-1297-1 by INRCORE, LLC. The item is classified as a critical application item with strict compliance requirements under DLA packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and adherence to RP001 for procurement packaging. The transformer must be delivered FOB origin within 88 days with zero quantity variance, and inspection and acceptance occur at the destination. The packaging must reflect special handling instructions due to fragility, including fragile labeling and arrow-up orientation, as terminals are susceptible to damage. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award dates. The contract is issued under SPE7M1-26-U-5010, with a total quantity of 73 units and a direct delivery requirement under DLA Direct, CONUS coverage.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-26-U-5018
This contract is for the procurement of a solid state relay, identified by NSN 5945-01-450-4840 and part number 144600 from SETRA SYSTEMS, INC., under solicitation SPE7M1-26-U-5018. The item is classified as a critical application component with a delivery requirement of 51 days FOB origin, and the contracted quantity is 58 units at a unit price of $58.00, resulting in a total price of $3,364.00. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product or its direct contact, except under specific exemptions for functional uses in batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is subject to DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with additional directive to apply IPC/JEDEC J-STD-609 lead finish markings to each unit package to identify Pb or Pb-free attributes, following specified placement guidelines. Inspection and acceptance occur at destination, with zero variance allowed in quantity. This is a Women-Owned Small Business set-aside solicitation under NAICS code 334418, managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the primary point of contact.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details