CIRCUIT BREAKER BOX

CIRCUIT BREAKER BOX
CIRCUIT BREAKER BOX
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
-----FIRST ARTICLE TESTING NOT REQUIRED-----
VENDOR ITEM CONTROL DRAWING (NEW CODE)
FULL AND OPEN COMPETITION APPLIES.
DETAILED DRAWING
BID SET AVAILABLE.
TDP Rev B Gen 4 IAW BASIC DRAWING NR 19207 12416418 REVISION NR D DTD 05/30/2010 PART PIECE NUMBER: 12416418-002
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12420325 REVISION NR L DTD 11/15/2024 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12489392 REVISION NR A DTD 08/05/2010 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12489393 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504347 REVISION NR DTD 10/22/2009
SPE7M5-26-T-451X
SECTION B
PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12489394 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12489395 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504340 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504342 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504343 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504344 REVISION NR A DTD 05/03/2010 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12504345 REVISION NR DTD 10/22/2009 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12416418-002 REVISION NR 06 DTD 06/18/2026 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017437419 0001 EA 8.000
NSN/MATERIAL:5925015407580
SPE7M5-26-T-451X
SECTION B
PR: 7017437419 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/05/2027 Original Required Delivery Date:03/19/2027
SPE7M5-26-T-451X NSN/Part Number: 5925-01-540-7580 Quantity: 8 EA Purchase Request: 7017437419QTY: 8 Delivery: 116 days ADO