This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CIRCUIT BREAKER
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of two circuit breakers with part numbers B5771 and PDLM-80 under NSN 5925-00-241-9773, with a total value of $111.06, delivered FOB origin within 20 days of order to Rygge Air Force Base in Norway. The item must conform to the DLA Master List of Technical and Quality Requirements, and all manufacturing, testing, and cleaning processes are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer, a restriction that supersedes other specifications but does not reduce performance obligations. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Packaging must strictly adhere to MIL-STD-2073-1E with specified preservation method 41, no cleaning or preservation materials, and unit container type D3, while marking and labeling comply with MIL-STD-129 including mandatory linear and 2D Data Matrix bar codes, with no special marking required. The contract mandates electronic invoicing through WAWF only and requires full compliance with NIST SP 800-171, cybersecurity safeguarding standards under FAR 52.240-93 and DFARS 252.240-7997, and prohibited telecommunications equipment restrictions under DFARS 252.204-7018. Contractors must also implement whistleblower protections, notify the government of potential safety issues, and ensure all employees are informed of their rights under federal law. The solicitation is structured as a simplified acquisition under FAR Part 13 using a fixed-price contract type, with a solicitation closing date of July 21, 2026, and offers must be submitted via the DLA Internet Bid Board System. Quality assurance and acceptance occur at origin, with no variance allowed in quantity and delivery tied to a required date of July 8, 2026. The contractor must maintain current SAM registration and provide UEI and CAGE codes as needed, and any use of subcontractors for commercial items must comply with
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
ITEM NAME CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
DCM MANUFACTURING, INC. DBA 46522 P/N B5771
SENSATA TECHNOLOGIES, INC. 82647 P/N PDLM-80
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-302D
SECTION B
PR: 7017390069 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017390069 0001 EA 2.000
NSN/MATERIAL:5925002419773
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
FREIGHT FORWARDER:
DNO005
DSV AIR & SEA
DEFENSE WAREHOUSE, DOOR 40
800 FEDERAL BLVD
CARTERET NJ 07008
US
FREIGHT SHIPPING ADDRESS:
DNOR00
RYGGE AIR FORCE BASE
FLYPLASSVEIEN 300
1580 RYGGE
RYGGE
NO
MARKFOR
DNOR00
RYGGE AIR FORCE BASE
FLYPLASSVEIEN 300
1580 RYGGE
RYGGE
NO
M/F: (TCN) PNOR5461820001
RDD:
PROJ: TP 2
SUPP ADD: DA5JBB SIG: L
SPE7M5-26-T-302D
SECTION B
PR: 7017390069 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:07/08/2026
SPE7M5-26-T-302D NSN/Part Number: 5925-00-241-9773 Quantity: 2 EA Purchase Request: 7017390069QTY: 2 Delivery: 20 days ADO
More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS