Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

CIRCUIT BREAKER

Awarded
SPE7M5-26-T-369PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 11 circuit breakers identified by NSN 5925-01-392-9915 under solicitation SPE7M5-26-T-369P, with a total contract value of $121.00 at $11.00 per unit. The items must be delivered within 154 days after award to the designated receiving warehouse in Tracy, California, with FOB origin terms and inspection and acceptance occurring at the destination. The circuit breaker must conform to SAE AS25244 Revision B and SAE AS58091-A1 specifications, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede industry standards such as ASTM D3951. Packaging must adhere strictly to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with hazardous materials requiring compliance with TQ requirement IP025 and 29 CFR 1910.1200, while non-hazardous items follow ASTM D3951 only if not overridden by DLA requirements. The item is classified as a critical application item, and component qualification must align with Qualified Products Lists or Qualified Manufacturers Lists per Procurement Note H02. All deliveries must be palletized per RP001 and submitted electronically through Wide Area Workflow for payment processing. The solicitation incorporated numerous FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, export controls, prohibited equipment sourcing, electronic payment instructions, and the prohibition of hexavalent chromium. Offerors must provide valid UEI and CAGE codes, certify small business status and socioeconomic designations through SAM registration, and comply with mandatory disclosures related to defense telecommunications equipment or services. Proposals must be submitted electronically via DIBBS by August 17, 2026, and the contract is subject to deviation 2026-00038 applied to multiple clauses. Payment is managed through DoDAACs under WAWF, with no alternative invoicing methods authorized.

General Info

Eleven circuit breakers, NSN 5925-01-392-9915, FOB origin, delivered to Tracy, CA by Jan 29, 2027, at $11 each.

Contract Value

$3,850

NAICS

335313 - Switchgear and Switchboard Apparatus Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Award Issued Date

Documents

2
PDF, High priority: read this firstaward
High
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
DLA award SPE7M527V0089 posted on DIBBS. Awardee: FLAME ENTERPRISES, INC. (CAGE 2V320) Total Contract Price: $3,850.00 Award Date: 10-02-2026 Solicitation: SPE7M5-26-T-369P Line items: - CIRCUIT BREAKER (NSN/Part 5925013929915, PR 7017600834)

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
SLED
26-39R
Solicitation # 26-39R
The City of Hamilton, Ohio, has issued solicitation 26-39R for the purchase and delivery of 15kV dead-front pad-mounted air insulated switchgear for the Hamilton Enterprise Park. The scope of work includes the procurement of eight units of 4-600A switchgear and four units of 3-600A/1-200A switchgear, which must meet specific technical standards including a 95KV basic insulation level and a main bus continuous current of 600A. Bids must be submitted in sealed envelopes to the Purchasing Agent at One Renaissance Center by 2:00 PM on November 13, 2026. The contract will be awarded to the lowest responsive and responsible bidder, and submissions must include technical cut sheets, a bid security of 10 percent of the total bid, and various signed affidavits covering non-collusion, drug-free workplace compliance, and Ohio ethics laws. Deliveries are to be made FOB to the City of Hamilton Substation 5, with specific coordination required via telephone 24 hours and one hour prior to arrival. The City maintains the right to inspect supplies after delivery and will reject any damaged materials or shipments marked C.O.D. Payment will be issued within 30 calendar days upon receipt of a proper invoice, contingent upon the availability of lawful appropriations by the City Council. Contractors are required to maintain workers compensation and employer liability insurance and must certify that they have no unresolved findings for recovery of public funds issued by the Auditor of the State of Ohio.
The City of Hamilton

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
SLED
Disconnect Switches 35kV
Solicitation # 2026-IFB-MS-0484
The City of Pasadena, Water and Power Department, is soliciting bids under solicitation number 2026-IFB-MS-0484 to establish a multi-year contract for the purchase of two variations of 35 kV Disconnect Switches, specifically for Circuit Breaker and Bus Tie configurations. These outdoor, three-pole, group-operated switches must be rated for a maximum voltage of 48.3 kV with a 250 kV Basic Insulation Level and must comply with IEEE, ANSI, NEMA, and ASTM standards. The contract will be awarded to the lowest responsive and responsible bidder based on the Grand Total Price submitted via the City's eProcurement Portal. Bidders must demonstrate capability, financial resources, and a history of quality performance, while adhering to strict packaging and marking requirements to prevent damage during transit and storage. Key compliance requirements include the submission of Form AA-1 for Equal Employment Opportunity, adherence to the Pasadena living wage ordinance, and compliance with California Public Contract Code and Labor Code regarding subcontractor payments and prevailing wages. The supplier is required to provide a minimum warranty of 12 months after initial energization and must submit an Inspection and Test Procedure Outline three weeks before testing begins. All bids and pricing must be submitted electronically through the eProcurement Portal by November 27, 2026, at 3:00 pm. Final inspection will occur upon receipt of the order at the vendor's expense, and all equipment must be accompanied by a certified test report reviewed and accepted by the City.
City of Pasadena, Water and Power Department

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 335313
New
SLED
Load Break Switch
Solicitation # Z5467
Nashville Electric Service is soliciting bids for the procurement of 10 units of 1200 Amp Load Break Switches. These switches must feature a continuous ampacity and interrupting capacity of 1200 Amps, a nominal voltage of 34.5KV with a 38KV maximum, 200KV B.I.L., and a 30,000AMPS RMS asymmetrical one-time fault closing duty cycle. Mechanical specifications require a hot-dipped galvanized steel mounting base per ASTM A123, minimum 9.5 feet in length with at least 29 inches of phase separation. The equipment must be suitable for outdoor mounting on single wood, concrete, or steel poles and include a single point lifting bracket, grounding lug installation holes, and sufficient hardware to allow mounting 40 feet above the handle. Compliance with ANSI, NEMA, and IEEE standards is mandatory, and the use of aluminum components in the operating mechanism or conducting elements is strictly prohibited. Bidders must provide the earliest delivery time in calendar days, as delivery speed may influence the award decision. Only approved manufacturers are acceptable, and alternate brands will not be considered. All loose parts must be packaged in labeled wood boxes containing specifications and mounting diagrams, and the final delivery must be made via an open flat bed truck. Bids are due by 2:00 pm on November 6, 2026, and must be submitted through the designated Bid Center.
Nashville Electric Service

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335313
New
Grant
Grid Supply Chain Alternatives to Lead Energy Dominance (SCALED)
Solicitation # DE-FOA-0003641
The Grid Supply Chain Alternatives to Lead Energy Dominance (SCALED) initiative is a Department of Energy program managed by the National Energy Technology Laboratory to strengthen domestic capabilities for essential grid components and protect energy infrastructure from supply chain shocks. This effort is structured as a series of cooperative agreements with a total funding pool of 237 million dollars, aiming to award between 70 projects. The initiative is divided into two primary topic areas: Topic Area 1 focuses on the refurbishment and reuse of critical grid equipment with a funding allocation of 50 million dollars and a required technology readiness level of 8 or higher. Topic Area 2 focuses on alternative materials and subcomponents with 187 million dollars in funding and a required technology readiness level of 6 or higher. The program operates under strict federal guidelines, including Build America, Buy America requirements and the Davis-Bacon Act. Performance periods range from 24 months for Topic Area 1 to a phased approach for Topic Area 2, which can extend up to 48 months and includes a critical go/no-go decision point after the first year. Applicants must be registered in SAM.gov and provide a Unique Entity Identifier. Evaluation is based on project merit, technical soundness, and the qualifications of key personnel, with a specific emphasis on the ability to expand U.S. manufacturing capacity and reduce procurement costs. Cost sharing is required for these awards, and for-profit entities expending over one million dollars annually are subject to independent compliance audits.
National Energy Technology Laboratory

POSTED

2 days ago

DEADLINE

in 3 months
View Details
NAICS: 335313
New
DIBBS
SWITCH, ELECTRONIC
Solicitation # SPE7M8-27-Q-0016
Solicitation SPE7M8-27-Q-0016 is a small business set-aside request for the procurement of 26 electronic switches, identified by NSN 5930-01-670-6569, for the DLA Weapons Support Electrical Devices Division. The requirement includes a delivery timeline of 210 days after receipt of order, with a specific process for Contractor First Article Testing (FAT) that involves a 60-day window for report delivery, a 30-day government evaluation period, and a final 120-day production delivery window. The contract mandates compliance with the AS9100 higher-level quality standard and requires the use of the Wide Area WorkFlow system for all invoicing and payment requests. This procurement involves significant regulatory and security constraints, including a restricted technical data package from Oshkosh Defense, LLC, which requires a signed license agreement and adherence to data non-disclosure and destruction conditions. The technical data is subject to ITAR or EAR export controls, meaning access is limited to approved DLA contractors with US/Canada Joint Certification Program certification. Additionally, the contractor must meet CMMC Level 2 certification requirements and comply with DFARS 252.204-7012 for safeguarding covered defense information. Award will be based on the best value, evaluating price, offered delivery, and past performance, with a financial penalty of 2,500 added to the quoted price if origin inspection is proposed instead of destination inspection.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332994
New
DIBBS
CLEANING KIT, GUN
Solicitation # SPE7L7-27-T-0313
Solicitation SPE7L7-27-T-0313 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support Land Supplier Operations for the procurement of two gun cleaning kits (NSN 1005-01-728-6872). These items are designated as critical gun parts with unique requirements and must be delivered to NSWC Crane within 20 days after receipt of order. The procurement is subject to strict technical specifications, including basic drawing 30003 3392AS1330 and several reference drawings. Quality assurance is paramount, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with inspections and acceptance conducted at the origin by a DCMA QAR. The contract incorporates rigorous compliance and security standards, including CMMC Level 2 self-assessment or third-party certification and adherence to ITAR or EAR export controls for technical data. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for hazardous material labeling per 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Additionally, offerors must comply with the Buy American Act and Berry Amendment, and are prohibited from using additive manufacturing processes unless specifically authorized.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS