Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CIRCUIT BREAKER

Active
SPE7M5-26-T-400QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single circuit breaker with NSN/Part Number 5925-99-357-9382, under Purchase Request 7017761062, with a delivery requirement of 20 days after award. The solicitation is issued under SPE7M5-26-T-400Q, with a posting date of August 10, 2026, and a response deadline of August 21, 2026. The item falls under NAICS code 335313 and is managed by the Active Devices Division of the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package including details for both the approved and alternate parts, and no government identification may be removed from non-accepted supplies. The place of performance is listed as FPO with ZIP 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided.

General Info

Procure single circuit breaker NSN 5925-99-357-9382, deliver in 20 days, response due August 21, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

UNIT 100470 BOX 1, FPO, AP, 96694, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-400Q for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT BREAKER
CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5925-99-357-9382 Quantity: 1 EA Purchase Request: 7017761062QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
Federal
Circuit Breaker IDIQ
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
Purchase Order - Siemens 550kV Extra High Voltage (EVH) Breaker Bushing ReplacementThe Western Area Power Administration, under the U.S. Department of Energy, has forecasted a procurement for the replacement of 550kV Extra High Voltage (EVH) breaker bushings supplied by Siemens, targeting a critical infrastructure upgrade within its power transmission system. This action falls under NAICS code 335313, indicating it involves the manufacturing of electrical equipment and appliances, and is aimed at ensuring the reliability and safety of high-voltage components critical to grid operations. The procurement is aligned with long-term maintenance and modernization goals, though specific delivery timelines, quantities, or technical specifications are not detailed in the forecast. The opportunity is publicly listed as a forecast and not yet an active solicitation, meaning formal bidding has not initiated. There is no set-aside designation indicated, and no place of performance or contract award details are provided at this stage. Point of contact for small business outreach includes two program managers affiliated with the agency’s small business initiatives, suggesting a potential emphasis on inclusive contracting practices. Stakeholders are encouraged to monitor future official solicitations for submission guidelines, technical requirements, and award timelines, as this forecast serves only as a preliminary indicator of upcoming procurement activity.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
Circuit Breaker IDIQThe Circuit Breaker IDIQ is a forecasted indefinite-delivery, indefinite-quantity contract issued by the Western Area Power Administration under the Department of Energy, targeted toward small businesses as indicated by the 8AN set-aside classification. The contract is associated with NAICS code 335313, which pertains to the manufacturing of electrical equipment such as circuit breakers and related controls. The solicitation is currently in the pre-solicitation phase with no formal solicitation number assigned and no published date for release. Performance location details are unspecified, and the contract is expected to support procurement needs related to electrical infrastructure components. Two Small Business Program Managers, Tetrault and Setzel, are listed as points of contact, both reachable via email for inquiries related to small business participation and contract opportunities. The official forecast document can be accessed through the provided UI link, which contains additional public acquisition planning information from the Department of Energy.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
HUBBELL RFL 9508 POWERLINE CARRIER (PLC) SPARE PARTS FOR SOUTH DAKOTA MAINTENANCEThe contract is for spare parts related to the Hubbell RFL 9508 Powerline Carrier (PLC) system to support maintenance operations in South Dakota under the Western Area Power Administration, a division of the Department of Energy. The procurement is forecasted for future release and is set aside exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335313 indicating it is tied to the manufacture of electric lighting and wiring equipment. The place of performance is specifically designated within South Dakota, and the technical requirements involve components necessary for the continued operation and repair of PLC equipment used in power transmission infrastructure. Two designated Small Business Program Managers, reachable at tetrault@wapa.gov and setzel@wapa.gov, serve as the primary points of contact for interested small business vendors seeking information or participation. Although the solicitation number is not yet available and the posting date reflects a forecast from 2026, this document signals an intent to procure critical maintenance components within the next several years.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
GC DWA Station Breakers & Outdoor Terminations
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
GC DWA Station Outdoor TerminationsThe Western Area Power Administration, under the Department of Energy, has issued a forecast for potential procurement related to outdoor terminations at DWA Station, categorized under NAICS code 335313 which pertains to other electrical equipment and component manufacturing. This procurement is aimed at securing specialized outdoor electrical termination components, likely for use in power transmission or distribution infrastructure, though exact scope, quantities, and delivery timelines are not yet defined as this is a forecasted opportunity and not an active solicitation. The contract is anticipated to support maintenance, upgrades, or expansion efforts at the DWA Station location, with performance expected to occur at or near the facility, though specific geographic details are not provided. Small business engagement is a priority, as indicated by the designation of two Small Business Program Managers as primary points of contact, both reachable via email through the Western Area Power Administration. No set-aside type or description is specified, but the inclusion of these contacts suggests the agency intends to prioritize participation from small businesses in future solicitations. The forecast was posted on August 10, 2026, and may serve as an early indicator of upcoming procurement activity, allowing potential vendors to prepare proposals and certification documentation. The official details will be formalized in a subsequent solicitation, which will be announced through the agency’s procurement channels.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
FLG & PPK Substation Disconnect SwitchesThe Western Area Power Administration, under the Department of Energy, is forecasting the upcoming procurement of disconnect switches for the FLG and PPK substations, with the contract opportunity posted on August 10, 2026. This anticipated acquisition falls under NAICS code 335313, which pertains to the manufacturing of electrical equipment for power distribution and control, indicating the need for specialized, high-voltage switching components designed to meet federal infrastructure standards. The project is intended to enhance the reliability and operational efficiency of critical power infrastructure within the Western Area Power Administration’s service area. There is no set-aside designation indicated for this procurement, and while specific details regarding quantities, technical specifications, or award dates are not yet available, the solicitation will likely be open to interested vendors, including small businesses. The primary points of contact for procurement inquiries are the Small Business Program Managers, reachable via email at tetrault@wapa.gov and setzel@wapa.gov, who can provide further guidance as the opportunity develops. All relevant updates and formal solicitation documents will be published through the official Department of Energy acquisition forecasting portal as the process progresses toward a formal bid release.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
AUTOMATIC TRANSFER SWITCH FOR WATERTOWN SUBSTATIONThe Western Area Power Administration, under the U.S. Department of Energy, is forecasting a procurement for an Automatic Transfer Switch to be installed at the Watertown Substation in South Dakota. The requirement is classified under NAICS code 335313, indicating it involves the manufacturing of electrical lighting and wiring equipment. The contract is designated as a small business set-aside, prioritizing participation from small businesses as defined by the Small Business Administration. The solicitation is currently a forecast and has not been officially released, with the posted date indicating it was published in July 2026 for future action. No specific solicitation number has been assigned yet, and the exact delivery location details, including city and zip code, are not provided, though the place of performance is confirmed to be in South Dakota. The point of contact for small business inquiries includes two Small Business Program Managers reachable via email at tetrault@wapa.gov and setzel@wapa.gov. Interested parties should monitor official channels for the formal solicitation release.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
Federal
Keswick Substation Disconnect Tandem/Selector Switch ReplacementThe Western Area Power Administration, under the Department of Energy, is forecasting a procurement to replace the disconnect tandem and selector switch at the Keswick Substation in California. This effort is targeted toward maintaining the reliability and operational integrity of critical transmission infrastructure, with work to be performed on existing electrical equipment to ensure continued safe and efficient power delivery. The solicitation is designated as a small business set aside under NAICS code 335313, which relates to the manufacturing of electrical control equipment, emphasizing the intent to engage qualified small businesses in the execution of this project. Although no solicitation number has been issued yet, the forecast was posted in August 2026, indicating an anticipated future release of formal bidding documents. The point of contact for this procurement is the Small Business Program Manager, with emails provided for coordination and inquiries, signaling the agency’s focus on outreach and partnership with eligible small businesses. The place of performance is specifically located in California, though no exact city or zip code is provided, suggesting the work will be confined to the Keswick Substation facility. The absence of a detailed contract value, timeline, or technical specifications in the forecast indicates this is a preliminary announcement to prepare the market, allowing potential vendors to align resources and capabilities ahead of the official solicitation. Interested parties should monitor official channels for the upcoming formal request for proposals.
Western Area Power Administration

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 335313
New
DIBBS
MODULE, SWITCH
Solicitation # SPE7M8-26-T-5931
This contract is for the procurement of a single switch module identified by NSN 5930-01-472-5978 and part number 5M/0066, supplied by STACO SYSTEMS, INC. The item is a restricted source requiring government engineering approval and must strictly comply with applicable technical and quality requirements referenced from the DLA Master List, including preservative and packaging standards per MIL-DTL-28786 and MIL-STD-2073-1E. All packaging and marking must conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging guidelines. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be pre-approved unless explicitly permitted by specification. The delivery is FOB origin with no tolerance for quantity variance, inspection and acceptance occur at destination, and the item must be delivered within 164 days of contract award. The required delivery date is January 26, 2027, with a need ship date of February 2, 2027. The consignment is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transport protocols outlined in DLAD Proc Note C19 and C20. The contract was solicited under SPE7M8-26-T-5931 with a response deadline of August 21, 2026, and falls under NAICS code 335313 for electrical device manufacturing.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5924
The contract pertains to the procurement of a switch and toggle assembly identified by NSN 5930-01-480-7051 and part number SW0175, with a total quantity of 123 units at a unit price of $123.00, resulting in a total contract value of $15,129.00. Delivery is required FOB origin within 164 days of contract award, with no tolerance for quantity variance. The items must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951 if there is a conflict. Non-hazardous items must be commercially packaged per DLA requirements, while hazardous items must adhere to Fed-Std-313 and TQ requirement IP025. All packaging and labeling must meet MIL-STD-129 standards, and palletization must conform to RP001 DLA Packaging Requirements. The unit of issue is each, with one unit per pack, and transportation is governed by DLA Procurement Notes C19 and C20. The solicitation number is SPE7M8-26-T-5924, issued under the NAICS code 335313 for Electrical Equipment and Component Manufacturing by the Department of Defense’s Electrical Devices Division. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026. The required delivery date is April 17, 2027, but the need ship date is February 2, 2027, indicating an internal timeline for shipment preparation. The primary point of contact is Dondiego Boler, reachable via phone and email provided, and all technical and quality specifications referenced are sourced from the official DLA Master List of Technical and Quality Requirements. The contract stipulates that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s standardized procurement protocols for simplified acquisition procedures.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5932
This contract is for the procurement of eight sensitive switches identified by NSN 5930-01-727-7888 and part number 13001667 from FAIRBANKS MORSE, LLC under solicitation SPE7M8-26-T-5932. Delivery is required within 164 days from the award date, with the original required delivery date set for January 19, 2027, and a need ship date of February 2, 2027. Items must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply strictly with MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging of switches, with marking conforming to MIL-STD-129 and no special marking codes required. Palletization must follow DLA’s packaging requirements and all components must be free of Class I ozone-depleting chemicals, which are prohibited regardless of any conflicting specification requirements. Substitute chemicals must receive prior approval unless explicitly authorized. The item is classified as a critical application item, and covered defense information may apply. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List available online, with revisions controlled based on acquisition scale and solicitation amendments. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation guidelines outlined in DLAD Proc Notes C19 and C20.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Transportation to DLA Distribution Facility
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Labeling Services
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
Printed Wiring Board Manufacturing and Supply
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery Logistics
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Sampling Inspection Services
Engineering Services

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Palletization Services
Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
Electrical Connector Backshell Manufacturing
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
TAPE, SHIELDING, ELEC
Solicitation # SPE7M5-26-T-400T
The contract pertains to the procurement of electrical shielding tape, specifically identified by NSN 5999-01-655-1087 and part number 416T2211-4, with a requirement for one unit per line item, delivered FOB origin within 20 days. The item is designated as a critical application component for Boeing and is subject to stringent technical and quality controls, including compliance with MIL-STD-130 for Item Unique Identification (IUID) and MIL-STD-129 for marking. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016, and all packaging and preservation must conform to MIL-STD-2073-1E and DLA packaging standards, with specific preservation methods, wrap materials, and packaging codes defined. The item carries a Type 2 shelf life of 12 months, extendable, and requires FAA airworthiness approval. Sampling and inspection procedures follow MIL-STD-1916 or equivalent zero-defect acceptance criteria, with all unspecified attributes treated as major. Delivery must be made via traceable freight methods—parcel post is prohibited—with designated freight and parcel post addresses identified for two separate locations: Altus Air Force Base, Oklahoma, and McConnell Air Force Base, Kansas. The contract enforces strict configuration change management, requiring formal engineering change proposals for any deviations, and no quantity variance is permitted beyond zero percent. The original required delivery date is August 3, 2026, for the first line item and August 6, 2026, for the second. All technical requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contractor is obligated to adhere to all applicable clauses under DFARS 252.211-7003 and related DLA directives.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0862
The item is an adapter and connector with the NSN 5935-01-261-5598, requiring five units to be delivered within 60 days of award under solicitation SPE7M5-26-Q-0862. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the United States, requires prior authorization from the Department of State or Commerce. Access to this controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DoD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. Compliance with DFARS 252.225-7048 is required, and this applies to all entities, including U.S. companies and their foreign subsidiaries. The solicitation was posted on August 10, 2026, with responses due by August 25, 2026, and the place of performance is New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Barbara Hoffmann of the Department of Defense, Active Devices Division, reachable via email and phone provided.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-400P
The contract specifies the procurement of an electrical plug connector, identified by part number CTV06RQW-25-17P and NSN 5935-01-679-3747, with a quantity of two units. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing R-series and I-series specifications over general standards like ASTM D3951. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging requirements. If the item is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, subject to DLA requirements. The item must be shipped via the fastest traceable means, prohibited from parcel post, with delivery directed to ASD Norfolk Supply Department in Norfolk, Virginia. The contract reference is SPE7M5-26-T-400P, with a required delivery date of August 6, 2026, and the solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026. The unit of issue is each, priced at $2.00 per unit, totaling $4.00. Government use codes and contact information for Margaret Smith at DLA are included for administrative tracking.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-Q-0855
The contract specifies the procurement of 12 electrical plug connectors with the NSN 5935-01-626-1291 under solicitation SPE7M5-26-Q-0855, to be delivered within 158 days after order date. The item is a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connectors and contacts, and must meet all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The connector must be manufactured to TDP Rev B Gen 2 in accordance with SAE-AS50151E and SAE AS34091 Revision A, with the part number MS3409DJ17D5D. Removable crimp-type contacts must not be pre-installed in the insert; instead, they must be securely placed in a noncorrosive rigid container such as a vial or box and enclosed within the unit packaging. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like batteries, instrumentation, or chemical reagents authorized by NAVSEA, and any portable devices containing mercury must include a secondary containment boundary as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-55330 for connectors with removable contacts, using preservation method 31, drying, and non-cushioning materials with unit containers labeled D3. All marking must follow MIL-STD-129 with special marking code 00-00 indicating no additional labeling requirements. Palletization must comply with DLA Packaging Requirements RP001. The contract uses a firm fixed price with zero variance allowed on quantity, and inspection and acceptance occur at destination. The item is to be shipped to DLA Distribution at the New Cumberland, Pennsylvania facility, with transportation governed by DLAD Proc Notes C19 and C20. The purchase request number is 7016888252, with a required delivery date of November 5, 2026. The contracting office is the Department of Defense’s Active Devices Division, with Barbara Hoffmann listed as the primary point of contact.
Other Building Material Dealers

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 444180
New
DIBBS
SHIELD, ELECTRONIC C
Solicitation # SPE7M5-26-T-400N
SHIELD TECHNOLOGIES CORP is contracted to supply 30 units of the electronic shield with part number 122164A and NSN 5999-01-628-3494 at a unit price of $30.00, for a total contract value of $900. Delivery is required within 17 days of contract award, with FOB origin terms and no quantity variance allowed. The product must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Non-hazardous items must be commercially packaged per MIL-STD-129, while hazardous materials must follow TQ requirement IP025. Packaging must adhere to RP001 for palletization and labeling, and all markings must conform to physical identification standards RQ017 and the removal of government identification from non-accepted supplies per RQ011. The unit of issue is each, with one unit per package. The original required delivery date is August 17, 2026, with a need ship date of September 8, 2026. The contract is administered under solicitation SPE7M5-26-T-400N, issued by the Department of Defense’s Active Devices Division, with Karen Collins as the primary point of contact.
Other Building Material Dealers

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details