Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CIRCUIT BREAKER

Active
SPE7M1-26-U-4581Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a circuit breaker identified by part number M83383/04-10, manufactured in full compliance with MIL-PRF-83383F(1) and referenced technical data packages, with no commercial substitutes permitted without prior written government approval. The item is classified as a critical application component and must be sourced only from qualified manufacturers listed under the associated Qualified Products List QPL-83383-16. The use of any Class I ozone-depleting substances in its design, manufacturing, testing, or cleaning is strictly prohibited unless explicit written authorization from the contracting officer is obtained, and this restriction overrides any conflicting specification requirements while maintaining all performance standards. The item must be packaged, marked, and labeled in accordance with MIL-STD-129 and DLA packaging requirements, with hazardous material handling conforming to FED-STD-313 and TQ requirement IP025 if applicable, otherwise commercial packaging per ASTM D3951 is acceptable subject to DLA Master List precedence. Delivery is required FOB origin within 271 days, with a fixed quantity of 17 units at a unit price of $17.00, no variance allowed, and inspection and acceptance occur at destination. The NSN is 5925-01-250-8887, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The contract is issued under solicitation SPE7M1-26-U-4581 by the Department of Defense, Maritime Supply Chain, with Bryan Fair designated as the primary point of contact.

General Info

Procure 17 M83383/04-10 circuit breakers, MIL-PRF-83383F-compliant, no substitutes, FOB origin, $17 each, NSN 5925-01-250-8887.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4581.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT BREAKER
CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THE REQUIRED ITEM IS M83383/04-10 MANUFACTURED BY A QUALIFIED QPD SOURCE
IAW MIL-PRF-83383. COMMERCIAL SUBSTITUTES ARE NOT ACCEPTABLE WITHOUT
PRIOR WRITTEN APPROVAL BY THE GOVERNMENT.
SPE7M1-26-U-4581
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-83383/4H REVISION NR H DTD 12/16/2024 PART PIECE NUMBER: M83383/04-10
TDP Rev A Gen 1 IAW REFERENCE QAP 14153 QAP-EQ001 REVISION NR B DTD 02/13/1996 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-83383F(1) NOT 1 REVISION NR F DTD 01/12/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-83383-16 NOT 1 REVISION NR 16 DTD 05/13/2008 PART PIECE NUMBER:
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237740 0001 EA 17.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5925012508887
DELIVERY (IN DAYS):0271
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M1-26-U-4581
SECTION B
PR: 1000237740 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT

SPE7M1-26-U-4581 NSN/Part Number: 5925-01-250-8887 Quantity: 17 EA Purchase Request: 1000237740QTY: 17 Delivery: 271 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334413
New
DIBBS
HEATER, THERMAL RELEASEThe contract pertains to the procurement of 55 units of a Thermal Release Heater identified by NSN 5999-00-504-9889, with a delivery schedule of 350 days from award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Configuration control requires formal engineering change proposals and procedures for requesting deviations or waivers. Items must be physically marked according to established identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No intentional addition of mercury or mercury-containing compounds is permitted in any supplied hardware or materials, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. No existing data package is available, and the alternate offeror must submit a complete data package including technical details for both the approved and alternate parts. The solicitation was issued under SPE7M1-26-U-4564 with a response deadline of August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through primary point of contact Bryan Fair.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRONICThe contract pertains to the procurement of 17 units of a display, optoelectronic item identified by NSN 5980-01-247-1862, with a delivery requirement of 120 days after order. The solicitation, numbered SPE7M1-26-U-4627, is issued under a Women-Owned Small Business Set-Aside and falls under NAICS code 334413. All supplied items must strictly conform to the source-controlled drawing referenced in the contract, and only the sources listed on that drawing are currently approved for this procurement, though additional qualified sources not yet reflected on the drawing may be considered in the future. Offerors seeking to qualify their products for future acquisitions must contact the cognizant design activity specified on the drawing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition size. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated; attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Packaging must comply with DLA packaging requirements, and government identification must be removed from any non-accepted supplies. The point of contact for this solicitation is Bryan Fair at the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
CAPACITOR, FIXED, ELECTRThe contract pertains to the procurement of 28 fixed electrolytic capacitors with NSN 5910-00-964-5759 under solicitation SPE7M1-26-U-4587, with a delivery timeline of 128 days after award. This is a total small business set-aside under NAICS code 334413, managed by the Department of Defense’s Maritime Supply Chain. The item is classified as a restricted source requiring engineering source approval from the government-designated control activity. Manufacturing may involve specialized casting or forging operations, for which the government may not possess the necessary tooling; therefore, bidders must submit a Casting and Forging Assistance Request if required. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All unit packages must be marked in strict compliance with IPC/JEDEC J-STD-609 for lead and lead-free identification, with marking placement following specified guidelines. Offerors must submit comprehensive documentation per MIL-T-31000, including all manufacturing drawings, detailed process sheets, identification of critical process suppliers including castings and forgings, purchase orders if available, and a shock extension report meeting MIL-S-901 and DI-ENVR-80706 standards. If original OEM drawings are unavailable, an engineering analysis report must be provided detailing the development methodology, including any reverse engineering procedures, sample sizes, measurement techniques, data compilation, and rationale for dimensional deviations. All documentation must be submitted to support government evaluation and approval prior to contract award.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUNThe contract is for the procurement of 39 purchase groups of electrical grounding strips, with each purchase group containing five units, totaling 195 individual strips. The item is classified as a commercial item and is identified by NSN 5999-01-285-7911 with approved source CAGE code 93455 and part number 8601107. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements and specific marking standards including physical identification and bare item marking, and any government identification must be removed from non-accepted supplies. An alternate offeror must submit a complete data package covering both the approved and alternate part since no data is currently available. The purchase order is linked to request number 1000238025 with a delivery requirement of 48 days after order placement. The solicitation number is SPE7M1-26-U-4603, issued by the Department of Defense’s Maritime Supply Chain under NAICS code 334413, with a response deadline of August 6, 2026, and the primary point of contact is Bryan Fair at DLA.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAThis contract is for the procurement of a digital microcircuit under Federal Supply Class 5962, subject to strict technical, quality, and packaging requirements mandated by the Defense Logistics Agency. The item must be sourced from qualified suppliers listed on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, with full supply chain traceability documentation retained by the contractor in accordance with DLA Procurement Note C03. Traceability and test reports must be submitted electronically at least 15 days prior to delivery, limited to 15 megabytes per email using a prescribed naming convention, and received written authorization from the contract administrator before shipment is permitted. Each lot must include a completed DLA Land and Maritime Form 918 and proof of authorization within the packaging, and failure to comply renders payment non-final. The microcircuit must be marked per IPC/JEDEC J-STD-609 to indicate lead finish attributes, and all packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special marking ZZ indicating ESD sensitivity. The component is classified as ESD sensitive and requires compliance with MIL-PRF-81705 for electrostatic and electromagnetic interference protection, using only qualified barrier materials listed on QPL-81705. The contractor must maintain a compliant ANSI/ESD S20.20 program, operate at an approved ESD workstation per MIL-HDBK-773, use certified packaging for preservation method GX, and ensure all personnel are trained in proper handling procedures. Cushioning must meet A-A-59136 Class 1 Grade B density specifications or use form-fitting ESD containers to prevent lead damage. Mercury and mercury compounds are prohibited in all packaging materials. The contract specifies delivery of three units FOB origin within 198 days to a designated distribution facility in Columbus, Ohio, with zero variance permitted in quantity. All technical requirements are non-negotiable, with no waivers or deviations allowed.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
COUPLER, OPTOELECTROThe contract is for the procurement of 15 units of a commercial off the shelf optoelectronic coupler with NSN 5980-01-575-7650 under solicitation SPE7M5-26-T-339M. Delivery is required within 20 days of award, with the place of performance specified as Groton, Connecticut, 06349-5300. The procurement is governed by DLA packaging requirements and incorporates technical and quality specifications referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Commercial catalog data is deemed sufficient for this item, and government identification must be removed from any non-accepted supplies. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense’s Active Devices Division, with Margaret Smith listed as the primary point of contact. The NAICS code 334413 identifies the industry classification for this procurement.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
OXY SENSOR
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
HEATER, THERMAL RELEASE
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIOD
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
Federal
59--HEATER,THERMAL RELEASE
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
Federal
59--DISPLAY,OPTOELECTRONIC
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
Federal
59--HEATER,THERMAL RELEASE
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334515
New
DIBBS
LEAD, TESTThe solicitation seeks two units of LEAD, TEST with NSN 6625-00-042-4430 under contract SPE7M1-26-T-221T, with a firm delivery deadline of 20 days after award. Full and open competition applies, and the procurement is governed by DLA packaging requirements and technical quality standards listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date if modified. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and all contractors must adhere to DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR regulations, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status who have completed mandatory DLA training and questionnaire. The item is to be delivered to Keyport, WA, with a response deadline of August 3, 2026, and the NAICS code 334515 applies. Primary point of contact is Michael Reese at the provided email and phone number.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELECTROThis contract pertains to the procurement of 71 plug-in electronic sockets with the NSN 5935-00-148-3669 under solicitation SPE7M1-26-U-4524, issued as a total small business set-aside with a NAICS code of 334419. Delivery is required within 127 days of award, and all supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which govern packaging, inspection, and acceptance standards. Inspection and acceptance are to occur at the origin, with mandatory bare item marking and strict protocols for the removal of government identification from non-accepted items. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the hardware, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise directed, with verification levels assigned based on attribute criticality. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, and is only accessible to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. Additionally, the contractor must be certified at CMMC Level 2 by an accredited third-party assessment organization and adhere to all applicable cybersecurity and defense information protection standards.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTERThe contract pertains to the procurement of a Synchro Transmitter, identified by part numbers 867-015-001 from Parker-Hannifin Corporation and HGC-11-RE-6/F798 from Moog Inc., with a National Stock Number of 5990-01-384-9747. A total of 72 units are required under purchase request 1000237780, with a unit price of $72.00 and a total price of $5,184.00. Delivery is mandated within 126 days on a FOB Origin basis, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination point, in compliance with DLA’s direct procurement procedures for CONUS. The item is classified as a Critical Application Item and must adhere to the full suite of technical and quality requirements listed in the DLA Master List, which overrides any other standards such as ASTM D3951. Packaging and labeling must conform to MIL-STD-129 and palletization must follow RP001: DLA Packaging Requirements for Procurement. Additionally, the vendor must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment compliance and remove government identification from non-accepted supplies. The solicitation number is SPE7M1-26-U-4634, with a response deadline of August 6, 2026, issued under the NAICS code 335312 by the Department of Defense’s Maritime Supply Chain office.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of two reciprocating pumps with NSN 4320-01-304-1371 and part number RPA308112C, issued under solicitation SPE7M1-26-T-221Q by the Department of Defense’s Maritime Supply Chain. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all supplies must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with packaging and labeling controlled by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The Unit of Issue is each, and palletization must adhere to DLA’s RP001 packaging requirements. The items are to be delivered to USNS YUKON T-AO 202 at FPO AP 96686, with transportation details governed by DLAD PROC NOTE C19 and C20. The original required delivery date is July 20, 2026, and the contract includes specific government-only codes for logistics tracking and distribution. All technical and quality specifications referenced via R or I numbers are sourced from the DLA Master List, whose applicable revision is determined by the solicitation issue date or any amendment date.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay under solicitation SPE7M1-26-U-4567, with the NSN 5945-00-818-8904 and part number MS25267-A1, requiring 30 units to be delivered FOB origin within 247 days. The item must comply with technical specifications MIL-PRF-6106R(1) SUP 1A and MS25267J, and all applicable requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Configuration change management, deviation requests, and qualified manufacturers lists are strictly controlled, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable devices. The use of Class I ozone-depleting substances is forbidden without written contracting officer approval, and this prohibition overrides any conflicting specification language. The contractor must ensure compliance with DLA packaging standards per MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and unit container marking, and all packaging must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit must be labeled according to IPC/JEDEC J-STD-609 to identify lead content, with markings placed as specified in the standard. Delivery is subject to zero variance in quantity, inspection and acceptance occur at the destination, and the item is classified as a critical application. Full and open competition is required, and the contract applies to government-furnished hardware with no commercial item exceptions. The point of contact is Bryan Fair at DLA, and all information must be interpreted within the context of the DLA acquisition framework.
Relay and Industrial Control Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID, ELECTRICALThe contract pertains to the procurement of a solenoid, electrical component with NSN 5945-00-463-9280 and part number 965830, sourced from approved vendors including RP001 compliant suppliers such as ROCKER SOLENOID CO, G.W. LISK CO, INC, and PARKER HANNIFIN CORPORATION. The item is classified as a critical application item under a total small business set-aside, with a requirement for 47 units delivered within 198 days FOB origin, with no tolerance for quantity variance. The contract mandates strict adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging code U, with all marking requirements following MIL-STD-129 and the special code ZZ for lead finish identification as defined by IPC/JEDEC J-STD-609. Each individual unit must be labeled in accordance with this standard to denote lead content and other attributes, with placement strictly regulated. Inspection and acceptance occur at the destination point, and the contract is issued under DLA direct, CONUS coverage using the DoD unit of issue system. The solenoid is subject to the overarching technical and quality requirements outlined in the DLA Master List, with compliance governed by the revision in effect at the solicitation or award date depending on acquisition size. The solicitation number is SPE7M1-26-U-4525, with a response deadline of August 6, 2026, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
IMPELLERThe contract specifies the procurement of two impellers with a diameter of 7.187 inches, identified by NSN 4320012660717 and purchase request 7017574014, under solicitation SPE7M1-26-T-221U. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The impellers must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all packaging must comply with MIL-STD-129 for marking and labeling. Unit packaging must adhere to the specified Quantity per Unit Pack (QUP) of 001, and palletization must follow DLA Packaging Requirements. The impellers are to be shipped via traceable freight to the designated Virginia Beach shipping address, and parcel post is explicitly prohibited. The contract lists two qualified suppliers—All-Safe Inc and Pentair Federal Pump, LLC—as authorized sources for the part number 443-1768-208, and the unit price is set at $2.00 per unit for a total price of $4.00. The government’s required delivery date is July 20, 2026, with the solicitation issued on July 22, 2026, and responses due by August 3, 2026. The contracting office is the Maritime Supply Chain under the Department of Defense, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUENCYThe contract pertains to the procurement of 22 units of a Radio Frequency Interference Filter with NSN 5915-01-260-4112 under solicitation SPE7M1-26-U-4586, issued by the Department of Defense's Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 106 days after award, with responses due by August 6, 2026. The item is subject to stringent cybersecurity requirements, including compliance with CMMC Level 2 as a Certified Third-Party Assessment Organization, and adherence to DLA’s technical and quality specifications referenced in their Master List. Technical data associated with the filter is classified as export-controlled under either ITAR or EAR, restricting dissemination to foreign persons regardless of location and mandating prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access this data. Additionally, the contractor must comply with DLA packaging standards, remove government identification from non-accepted supplies, and handle Covered Defense Information in accordance with applicable regulations. The procurement is managed by Point of Contact Bryan Fair, with all details accessible via the DIBBS website.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract is for the procurement of one power supply with NSN/Part Number 6120-01-592-7992, issued under solicitation SPE7M1-26-T-222A by the Department of Defense through the Maritime Supply Chain. The offeror must comply with all DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must be delivered within 20 days after delivery order issuance to Fort Bliss, Texas, with a response deadline of August 3, 2026. The offeror is also required to submit a complete data package including specifications for both the approved and alternate parts. The primary point of contact for inquiries is Michael Reese, reachable via email or phone, and the solicitation is unreserved with no set-aside designations, classified under NAICS code 335999 for other electrical equipment and component manufacturing.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICALThe contract pertains to the procurement of an electrical coil with NSN 5950-01-106-6783 and part number 213322-1178, supplied by Marotta Controls Inc, under solicitation SPE7M1-26-U-4616. Six units are required at a unit price of $6.00, totaling $36.00, with delivery mandated within 164 days FOB origin and no variance allowed in quantity. Inspection and acceptance occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special handling instructions indicating the item is delicate, featuring fragile terminals that must remain protected. The packaging code is U, utilizing preservative method 41, and requires marking with the special code 06 for delicate instrument and arrow up. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, or specific instruments as authorized by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier per NAVSEA 5100-003D. All packaging, marking, and shipping must adhere to DLA’s RP001 and IP025 requirements for hazardous materials. The contract falls under DLA Direct, CONUS coverage and uses the DoD-authorized unit of issue. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision controlled by the acquisition type and relevant dates. Purchasing is estimated and subject to IDC confirmation.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details