CIRCUIT CARD ASSEMB

CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMB
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S
13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
AND RELIABILITY TO THAT WHICH WAS AVAILABLE
PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
NOVEMBER 30, 1998.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
NORTHROP GRUMMAN SYSTEMS CORPORATION 97942 P/N 781R243G01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A4-26-T-0075
SECTION B
PR: 7004602098 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7004602098 0001 EA 1.000
NSN/MATERIAL:5998014518551
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
DRAWING INDICATES ITEM IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
OPENED AT AN APPROVED ESD WORKSTATION -ORFIELD
SERVICE KIT. FOR FURTHER INFORMATION, CONSULT
MIL-HDBK-773.
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified
SPE4A4-26-T-0075
SECTION B
PR: 7004602098 PRLI: 0001 CONT’D
manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DK7A00
NAEW & CF E-3A COMPONENT
HANGAR 2 EAST
POSTBOX 416026
GEILENKIRCHEN GERMANY 52511
DE
MARKFOR
DK7A00
NAEW & CF E-3A COMPONENT
HANGAR 2 EAST
POSTBOX 416026
GEILENKIRCHEN GERMANY 52511
DE
M/F: (TCN) DK7A5V32610010
RDD: A03
PROJ: TP 3
SUPP ADD: DA2KEV SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A31 DIST: N01 ADV: 2L FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:09/22/2023
SPE4A4-26-T-0075 NSN/Part Number: 5998-01-451-8551 Quantity: 1 EA Purchase Request: 7004602098QTY: 1 Delivery: 20 days ADO