Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CIRCUIT CARD ASSEMB

Active
SPE7M1-26-T-223WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-223W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS

Full Description

Show more
CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMBLY.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S
13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
SPE7M1-26-T-223W
SECTION B
DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
AND RELIABILITY TO THAT WHICH WAS AVAILABLE
PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
NOVEMBER 30, 1998.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
AIMTRON SYSTEMS, LLC 20284 P/N 13D0427H01 NORTHROP GRUMMAN SYSTEMS CORPORATION 97942 P/N 13D0427H01 ALEKTRONICS INC 0DR48 P/N 13D0427H01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017604400 0001 EA 2.000
NSN/MATERIAL:5998002452625
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier
SPE7M1-26-T-223W
SECTION B
PR: 7017604400 PRLI: 0001 CONT’D
material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:08/06/2027
SPE7M1-26-T-223W NSN/Part Number: 5998-00-245-2625 Quantity: 2 EA Purchase Request: 7017604400QTY: 2 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLYThis contract is for the procurement of 42 units of a Circuit Card Assembly identified by NSN 5998-01-485-9243 and part number B566 DR-IAC24, sourced from Lockheed Martin Corp under solicitation SPE7M1-26-T-227Y. Delivery is required within 168 days from the contract award date, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including special ESD marking code 39, indicating susceptibility to electrostatic discharge. All packaging must incorporate qualified ESD and EMI protective materials per MIL-PRF-81705, with barrier materials sourced exclusively from manufacturers on the QPL-81705 list, and components must be protected against physical damage, lead bending, and electrical degradation. Mercury and mercury-containing compounds are prohibited unless specifically exempted for certain functional components like batteries or instruments, and any exempted portable devices must include a secondary containment system per NAVSEA 5100-003D. The contractor must comply with DLA’s packaging requirements, cybersecurity CMMC Level 2 self-assessment, and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and the original delivery deadline is December 7, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract is for the procurement of two alternating current motors with NSN/Part Number 6105-01-313-2546 under solicitation SPE7M1-26-T-207C, with a required delivery within 152 days after order. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with the purchasing organization being the Department of Defense through the Maritime Supply Chain. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined based on the solicitation or award date depending on acquisition size. Configuration change management requires formal engineering change proposals or variance requests for any deviations. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The alternate offeror must submit a complete data package including technical documentation for both the approved and alternative part, as no data is currently provided. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Michael Reese, reachable via email and phone.
Motor and Generator Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details