This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CIRCUIT CARD ASSEMB

Closed

SPE4A5-26-T-114HFederal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334412

New

Federal

59--CIRCUIT CARD ASSEMBThis contract solicitation is for the procurement of one unit of a circuit card assembly with the National Stock Number 5998016305151. The item is to be delivered to DLA Distribution in location W1A8 within 694 days after order date. The approved source for this procurement is identified as 0GHS0 MT57M1131-2. The solicitation is issued as a Request for Quotation (RFQ), available exclusively online via a specified link, with no hard copies or related specifications, plans, or drawings provided. All responsible sources are invited to submit electronic quotes, which will be fairly considered if received on time. The solicitation is managed by the Defense Logistics Agency Land and Maritime under the Department of Defense, with the office located in Columbus, Ohio. The solicitation number is SPE7M126T143Z, posted on June 14, 2026, and responses must be submitted by June 25, 2026. The procurement falls under NAICS code 334412. Interested parties with questions are directed to contact the buyer via email provided in the solicitation documentation or through the official DIBBS platform. This procurement does not specify any set-aside type and is categorized as a combined type of contract.

DLA Land And Maritime

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract pertains to the repair of circuit card assemblies and outlines specific requirements for turnaround time, inspection, and acceptance. The repair turnaround time (RTAT) is measured from the physical receipt of the asset at the contractor’s facility, as documented in the commercial Asset Visibility system, to final government acceptance. The contractor must report all transactions promptly and meet the established RTAT for all assets, with a defined throughput constraint specifying the monthly number of units to be repaired. Pricing is tied to meeting these RTAT requirements, and any delays may result in negotiated adjustments. Assets must be received within 365 days of the contract award date unless otherwise agreed upon. Additional provisions include quality and inspection standards, safeguarding of sensitive items, adherence to Buy American and trade agreement requirements, and the use of specified payment and workflow systems. The contract also contains clauses related to equal opportunity, transportation of supplies by sea, security exclusions, and royalty information. The Department of Defense, through Navsup Weapon Systems Support, manages this contract with a solicitation deadline in mid-2026. The contractor’s compliance with these terms ensures timely repair and delivery of the specified components under government quality control and financial oversight.

Navsup Weapon Systems Support

POSTED

DEADLINE

VIBRATION ANALYZERThis contract pertains to the manufacture and quality assurance of a Vibration Analyzer as specified by the Department of Defense through DLA Mechanicsburg. It incorporates strict quality control requirements, including adherence to ISO-9001 standards and higher-level inspection criteria. The contract mandates identification marking per MIL-STD-130 and prohibits the use or contamination by metallic mercury due to its corrosive and toxic properties, specifying rigorous handling and testing measures if mercury is functionally required. Changes to design, materials, or part numbers require prior written approval by the contracting officer, with specific coding procedures for different types of changes. The responsibility for inspection rests with the contractor, though the government reserves the right to perform additional assessments to ensure compliance. The contract employs a Lowest Price Technically Acceptable evaluation approach and requires electronic submission of invoices and receiving reports via the Procurement Integrated Enterprise Environment. Packaging must comply with MIL-STD 2073 standards, and all contract-related documents or modifications become official upon issuance by the government through electronic or mail channels. Distributors are required to provide proof of authorization from the original manufacturer when submitting offers. Vendors are encouraged to register with government electronic commerce systems to facilitate communication and contract management. The contract includes detailed instructions for obtaining applicable documents and maintaining confidentiality according to distribution statements defined by OPNAVINST 5510.1. The solicitation deadline is July 13, 2026, and all procurement communications are directed through the designated point of contact at DLA Mechanicsburg.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract solicitation, issued by the Department of Defense through the NAVSUP Weapon Systems Support Mech office, pertains to the repair of CIRCUIT CARD ASSEMB components. It requires the contractor to provide firm-fixed-price quotes specifically for repair services, excluding test and evaluation-only pricing. The contractor must be an authorized repair source and comply with strict quality assurance standards, including adherence to MIL-STD packaging and government source inspection protocols. The repair turnaround time (RTAT) is set at 82 days from the physical receipt of assets, with penalties applied for delays unless excusable causes like government delays occur. The contract also mandates compliance with unique item identification (IUID) and cybersecurity maturity certification requirements, along with proper marking per MIL-STD-130. Submissions must include detailed pricing (repair unit price, total price, new unit price), RTAT commitments, capacity constraints if applicable, and supporting documentation such as CAGE codes for awarding and inspection facilities. The contract governs the inspection, testing, and acceptance of repaired items according to original manufacturer specifications and incorporates requirements related to changes in design or parts, which need prior government approval unless classified as minor part number changes. Delivery is FOB source with freight managed via Navy Commercial Asset Visibility systems. The solicitation specifies documentation acquisition protocols, including handling of classified or restricted materials, and requires offers to be submitted electronically to the designated contracting officer by the stated deadline.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PRINTED CIRCUIT BOAThis contract, titled "PRINTED CIRCUIT BOA" and issued by the Naval Supply Weapon Systems Support office of the Department of Defense, focuses on the repair, overhaul, testing, and inspection of specific electronic printed circuit boards as identified by drawing and specification references. The contractor is responsible for all aspects of the repair process, including providing necessary facilities, labor, materials, and tooling, while adhering strictly to approved manuals and specifications. The government will not supply any equipment such as fixtures, jigs, or special tooling. Repairs must restore items to a Ready For Issue (RFI) condition, ensuring operational reliability according to contract standards. Detailed procedures govern handling of items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or require Over and Above Repair (OAR), all requiring written concurrence from Defense Contract Management Agency (DCMA) and approval from the Procuring Contracting Officer (PCO) prior to proceeding. Key contract performance requirements include strict adherence to MIL-STD-130 markings, maintenance of quality management systems compatible with ISO 9001 or SAE AS9100 standards, and calibration systems meeting recognized programs such as ANSI/NCSL Z540.3. The contract sets forth turnaround times for repair measured from physical receipt to government acceptance, with mandatory transaction reporting via the Commercial Asset Visibility (CAV) system. The contractor must maintain configuration management and provide secure, enclosed storage for items awaiting and completed repairs. Pricing and reconciliation terms are based on meeting specified repair turnaround times, and any contract changes or manufacturing source alterations must receive government approval. The contract has a one-year induction period post-award and includes stringent controls over purchased materials and parts, emphasizing new and approved components unless otherwise authorized.

Navsup Weapon Systems Support

POSTED

5 days ago

DEADLINE

in 27 days

AI Contract Overview

This contract involves the procurement of a single unit of a circuit card assembly, part number 8531176-901 (NSN 5998-01-570-3389), with an expected delivery time of 171 days to the Defense Logistics Agency Distribution San Joaquin in Tracy, California. The contract includes stringent technical, quality, and packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with adherence to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. The item must be protected against electrostatic discharge (ESD) and electromagnetic interference (EMI), utilizing qualified materials compliant with MIL-PRF-81705 standards. Handling and packaging must ensure no damage or degradation occurs, especially to sensitive electrical components like leads and terminals. The contract also mandates compliance with configuration change management, variance requests for deviations or waivers, and removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination. Sampling and quality assurance must follow MIL-STD-1916 or equivalent standards. Critical defense information applies to this contract, requiring cybersecurity controls aligned with CMMC Level 2 self-assessment. The solicitation was issued on May 5, 2026, with proposals due by May 13, 2026, under NAICS code 334412 related to electronic component manufacturing for government defense applications. The point of contact for the contract is a representative from the Department of Defense’s ASC Supplier OEM Division.

General Info

Procurement of circuit card assembly with strict technical, quality, packaging, and cybersecurity requirements, delivery in 171 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

334412 - Bare Printed Circuit Board Manufacturing View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-114H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Sarah Kennedy

contact@example.gov

+1 (555) 000-0000

Full Description

CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 07187 P/N 8531176-901
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-114H
SECTION B
PR: 7016645222 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016645222 0001 EA 1.000
NSN/MATERIAL:5998015703389
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:P4 CUSH/DUNN THKNESS:B
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
SPE4A5-26-T-114H
SECTION B
PR: 7016645222 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:11/01/2026 Original Required Delivery Date:09/07/2028
SPE4A5-26-T-114H NSN/Part Number: 5998-01-570-3389 Quantity: 1 EA Purchase Request: 7016645222QTY: 1 Delivery: 171 days ADO