This Solicitation opportunity from Department Of Defense was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CIRCUIT CARD ASSEMB

Closed

SPE7M0-26-T-039DFederal

Submission Closed08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

SLED

Manufacturing and Supply of 93.3mm² Static/Ground/Earth WireThis subcontract involves the manufacture and supply of 217,754 units of 93.3mm² Aluminum-Steel static, ground, and earth wire for prime contractors working on California High-Speed Rail Authority projects. The fabrication of these conductors must strictly adhere to SNCF reference 0.841.6742 and IGTE 21461/200014 standards in accordance with EN 50182:2001. To ensure quality and regulatory adherence, the provider is required to perform qualification tests and issue Certificates of Compliance. A critical requirement of this agreement is full Buy America Compliance pursuant to 49 U.S.C § 22905. The performance of the contract is centered in Wasco, California. Interested parties must note the response deadline of November 19, 2026, for this procurement effort categorized under NAICS code 334418.

California High-Speed Rail Authority

POSTED

DEADLINE

Supplier of Telematics Fuel Monitoring Device Kits (Master-System-A)This subcontract, issued by Federal Prison Industries under the Department of Justice, requires the supply of 300 Telematics Fuel Monitoring Device Kits, specifically Part Number KITO759 Master-System-A. Each kit must be complete with fill rings, RFID modules, base modules, 15-foot extension cables, OBD11 cables, wake-up wires, installation hardware, and instructions. All provided equipment must comply with the Buy American, Free Trade Agreements, and Israeli Trade Act regulations. The completed kits are to be delivered to Bastrop, Texas, to support prime contractors on UNICOR Bastrop AIMS Units projects. This opportunity is designated as a total Small Business Set Aside under NAICS code 334418. The response deadline for this requirement is November 4, 2026.

Inc Federal Prison Industries

POSTED

DEADLINE

Circuit Card Assembly Repair and Overhaul ServicesThis subcontract for Navsup Weapon Systems Support involves the overhaul, upgrade, and repair of circuit card assemblies for prime contractors. The scope of work includes detailed inspections, component-level repairs, and the replacement of defective parts for specific NIINs 015123463, 015215180, 016194547, and 016201746. All work must be performed using precision soldering and testing tools in accordance with TDP Versions 001 and 004 to ensure all assemblies are delivered in Ready for Issue condition. The project falls under NAICS code 334418 and requires strict compliance with DFARS Buy American certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 27, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Instrumentation Component SupplyThis subcontract for Instrumentation Component Supply involves the sourcing and procurement of miscellaneous instrumentation spare parts for prime contractors serving the Oil and Gas Development Company Limited (OGDCL) KPD TAY PLANT in Pakistan. The scope of work includes providing OEM or approved equivalent sensors, transmitters, gauges, controllers, and valves, ensuring that all supplied components adhere to plant technical specifications and PPRA rules. The contractor is responsible for the complete delivery of the shipment to the designated OGDC facility. Interested parties must submit their responses by the deadline of November 11, 2026, for this project categorized under NAICS code 334418.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Circuit Card Assembly (CCA) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies for the MD-1286/SPN-43C Radar Modulator, supporting NAVSUP Weapons Systems Support radar projects for the Department of the Navy. The contractor is responsible for fabricating PCBs and assembling electronic components in strict accordance with TDP Version 007. The project requires the delivery of three completed assemblies, emphasizing rigorous quality control through 100% material traceability and UID markings as mandated by DFARS 252.211-7003. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 334418, with all final deliveries requiring comprehensive traceability documentation.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Circuit Card Assembly Repair and Modification ServicesThis subcontract for Circuit Card Assembly Repair and Modification Services supports NAVSUP Weapon Systems Support projects for the Department of the Navy. The scope of work involves the teardown, evaluation, repair, and modification of specific Circuit Card Assemblies, identified by NIIN 200098692. The selected provider will be responsible for disassembling assemblies to locate failed components, performing repairs according to technical orders and manufacturer specifications, and conducting final inspection and testing to deliver fully functional units. Performance will take place in Mechanicsburg, Pennsylvania, and requires the use of electronics diagnostic equipment and precision soldering stations. To be eligible, the contractor must meet CMMC requirements. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 334418.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the manufacturing of high-precision, special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of assemblies specifically to NSN 5995-01-693-3733 and Kongsberg P/N 60269836-02 specifications. All deliverables must adhere to Critical Application Item quality standards and DLA Master List requirements, with the final delivery consisting of completed and warranted cable assemblies. To be eligible for this contract, providers must hold approved source status or possess written authority from Kongsberg. The opportunity is categorized under NAICS code 334418 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Fabrication of Frequency Module AssembliesThis subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, involves the precision assembly and fabrication of frequency module assemblies. The scope of work specifically includes PCB assembly and component integration for Hamilton Sundstrand part number 690416. All deliverables must undergo rigorous testing and quality sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure compliance and security, the contractor must maintain CMMC Level 2 certification and adhere to MIL-STD-129 and ASTM D3951 for packaging and marking. The final deliverables consist of completed, tested, and packaged Frequency Module Assemblies to be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Circuit Card Assembly (P/N 9800-96605-0002) SupplyThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the supply of five units of Circuit Card Assembly, part number 9800-96605-0002. These assemblies, identified by NSN 5998016919292, are intended for prime contractors working on DoD and MARAD projects. The selected provider must utilize appropriate circuit board fabrication and assembly equipment to manufacture or source the units. The contract mandates strict adherence to Critical Application Item quality standards and requires compliance with specific defense telecommunications equipment restrictions. Performance for this requirement is located in Tracy, California, under NAICS code 334418. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of three special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to produce the assemblies according to NSN 5995-01-545-7010 and Amentum P/N 127267-10, ensuring all items are marked per RQ017. Quality assurance must be maintained through sampling and inspection conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and maintain compliance with DFARS Buy American regulations. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flame Retardant Tape (4 Inch 398FR)This subcontract involves the supply of 8,000 rolls of 4-inch flame retardant tape for prime contractors supporting the Department of Defense. The materials must strictly adhere to the 398FR flame retardancy specification and correspond to NSN 7018900979. The final order is to be delivered to the designated DLA destination in Cherry Point, North Carolina. Eligible providers must maintain an active SAM registration, including a valid Unique Entity ID and CAGE code. This opportunity is managed by the DLA Fleet Readiness Center DLA PSC under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Special Cable Assembly Supplier (NSN 5995012034456)This subcontract involves the manufacture or sourcing of four special cable assemblies for the DLA Weapons Support ASC Commodities Division. All units must be produced according to the technical data package specifications for NSN 5995012034456. The contractor is responsible for ensuring that all items are marked in accordance with MIL-STD-129 and packaged and palletized following RP001 DLA Packaging Requirements. Final delivery of the assemblies is required at the DLA Distribution DDSP New Cumberland Facility. To facilitate payment, the supplier must maintain an active SAM registration for invoicing through the Wide Area Workflow system. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation SPE7M0-26-T-039D is a total small business set-aside for the procurement of circuit card assemblies, specifically an angle of attack computer for T-38 aircraft, identified by NSN 5998011875619. The requirement consists of two line items, each for one unit, with a total estimated value of 140,000 dollars. Delivery is required within five days after receipt of order, with a required delivery date of August 12, 2026, shipped FOB Origin to Hill Air Force Base, Utah. The contract mandates rigorous technical compliance for electrostatic discharge and electromagnetic interference protection. All items must be handled and packaged at approved ESD workstations in accordance with MIL-HDBK-263 and MIL-HDBK-773, using MIL-PRF-81705 barrier bags and preservation method GX. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including the application of special marking code 39. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with CMMC Level 2 self-assessment and covered defense information controls.

General Info

Procurement of two T-38 aircraft circuit card assemblies for Hill AFB by August 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

5851 F AVE BLDG 849W, HILL AFB, UT, 84056-5713, USA

Set-Aside

SBA

Documents

RFQ SPE7M0-26-T-039D for DLA Maritime Supply Chain ESOC Buys

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Combined Synopsis

Response DeadlineAug 24

Deadline has passed

Submission Closed

08/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Office AddressUSA

Contacts

Audrey Acuna

contact@example.gov

+1 (555) 000-0000

Full Description

CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
APPL ANGLE OF ATTACK COMPUTER T-38 ACFT
HONEYWELL INTL INC DEFENSE 55972 P/N 2807199-1
U. S. DYNAMICS CORPORATION 26269 P/N 536001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017821445 0001 EA 1.000
NSN/MATERIAL:5998011875619
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M0-26-T-039D
SECTION B
PR: 7017821445 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
ATTENTION:
THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED<(>,<)>
AND OPENED AT AN APPROVED ESD WORKSTATION -OR
FIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
SPE7M0-26-T-039D
SECTION B
PR: 7017821445 PRLI: 0001 CONT’D
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D<(>,<)>
PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP +1 (555) 000-0000
5851 F AVE BLDG 849W
HILL AFB UT 84056-5713
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP +1 (555) 000-0000
5851 F AVE BLDG 849W
HILL AFB UT 84056
US
M/F: (TCN) FB202962190184
RDD: 777
PROJ: AWP TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: 2L FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/12/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE7M0-26-T-039D
SECTION B
PR: 7017821446 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017821446 0001 EA 1.000
NSN/MATERIAL:5998011875619
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject
SPE7M0-26-T-039D
SECTION B
PR: 7017821446 PRLI: 0001 CONT’D
to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
ATTENTION:
THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED<(>,<)>
AND OPENED AT AN APPROVED ESD WORKSTATION -OR
FIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D<(>,<)>
PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
SPE7M0-26-T-039D
SECTION B
PR: 7017821446 PRLI: 0001 CONT’D
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
ATTENTION:
THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED<(>,<)>
AND OPENED AT AN APPROVED ESD WORKSTATION -OR
FIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D<(>,<)>
PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961
SPE7M0-26-T-039D
SECTION B
PR: 7017821446 PRLI: 0001 CONT’D
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS
PARCEL POST ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP +1 (555) 000-0000
5851 F AVE BLDG 849W
HILL AFB UT 84056-5713
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP +1 (555) 000-0000
5851 F AVE BLDG 849W
HILL AFB UT 84056
US
M/F: (TCN) FB202962190194
RDD: 777
PROJ: AWP TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: 2L FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/12/2026
SPE7M0-26-T-039D NSN/Part Number: 5998-01-187-5619 Quantity: 1 EA Purchase Request: 7017821446QTY: 1 Delivery: 5 days ADO