59--CIRCUIT CARD ASSEMBLY

CIRCUIT CARD ASSEMBLY
CIRCUIT CARD ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
APPL ANGLE OF ATTACK COMPUTER T-38 ACFT
HONEYWELL INTL INC DEFENSE 55972 P/N 2807199-1
U. S. DYNAMICS CORPORATION 26269 P/N 536001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018681224 0001 EA 4.000
NSN/MATERIAL:5998011875619
DELIVERY (IN DAYS):0147
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M5-27-T-1602
SECTION B
PR: 7018681224 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
ATTENTION:
THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED<(>,<)>
AND OPENED AT AN APPROVED ESD WORKSTATION -OR
FIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
SPE7M5-27-T-1602
SECTION B
PR: 7018681224 PRLI: 0001 CONT’D
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D<(>,<)>
PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:04/06/2027 Original Required Delivery Date:04/30/2028
SPE7M5-27-T-1602 NSN/Part Number: 5998-01-187-5619 Quantity: 4 EA Purchase Request: 7018681224QTY: 4 Delivery: 147 days ADO