Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Circuit Card Assembly (CCA) Manufacturing and Assembly

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards the manufacture and assembly of a military-grade circuit card, part number 012095-0001, for the AN/GRN-29 ILS-M system, requiring full compliance with original equipment manufacturer specifications. The work encompasses all phases of production including printed circuit board fabrication, precise component placement, and final assembly to ensure operational reliability under stringent military conditions. The procurement is classified as a subcontract under NAICS code 334418 and is managed by the Department of Defense through the FA8119 Afsc Pzabc office, with performance to be completed at a facility located in S Coffeyville. This effort is critical to sustaining the functionality and readiness of the AN/GRN-29 system, and all deliverables must meet exacting defense standards for durability, performance, and quality control.

General Info

Manufacture and assembly of military-grade circuit card 012095-0001 for AN/GRN-29 ILS-M system.

Agency

Department Of Defense → FA8119 Afsc PzabcView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

S Coffeyville, OK, USA

Set-Aside

NONE

Documents

This scope was carved out of FA811926P0002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Circuit Card Assembly - NSN: 5998-01-538-1959IM - P/N: 012095-0001

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedApr 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8119 Afsc Pzabc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8119 Afsc Pzabc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and assembly of a military-grade circuit card (P/N: 012095-0001) for the AN/GRN-29 ILS-M system, including PCB fabrication, component placement, and final build to OEM specs.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M5-26-Q-0990

This contract is for the procurement of 201 units of a circuit card assembly, identified as part number TU14404P from Alliance Laundry Systems LLC. The delivery is required within 42 days after the order is received, with inspection and acceptance occurring at the destination. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically regarding the prohibition of intentionally added mercury compounds. Extensive packaging standards are required to prevent damage to leads and terminals, including the use of DOD qualified electrostatic discharge and electromagnetic interference protective materials per MIL-PRF-81705. All packaging and marking must comply with MIL-STD-129 and DLA packaging requirements for procurement.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

RELAY, SOLID STATE

Solicitation # SPE7M2-26-T-6695

This contract is for the procurement of 52 units of solid state relays, identified by NSN 5945012914462 and TE Connectivity part numbers 86031-001 and PS12-1Y. The order is designated as a critical application item and must adhere to specific technical and quality requirements, including the DLA Master List and NAVSEA standards regarding the restriction of mercury. Delivery is required within 43 days, with a need ship date of October 28, 2026, and a final required delivery date of May 21, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with specific requirements for component lead finish markings according to IPC/JEDEC J-STD-609. This is a total small business set-aside procurement under the Department of Defense Nuclear Reactor Program.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-26-T-326K

This contract is for the procurement of one circuit card assembly, identified by NSN 5998014981957 and Telephonics Corp part number 499-4840-002. The solicitation, numbered SPE7M1-26-T-326K, is issued by the Department of Defense and requires delivery within 20 days. The item is to be shipped FOB Origin to the Army Aviation Depot in Tainan City, Taiwan, with a required delivery date of September 9, 2026. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Compliance with Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 self-assessment is required. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Concurrent MS Processor Blade Cards

Solicitation # N0016726Q0016

The Naval Surface Warfare Center Carderock Division is soliciting quotes under solicitation N0016726Q0016 for the procurement of Concurrent MS Processor Blade Cards and associated hardware. This is a brand-name, small business set-aside acquisition for proprietary Concurrent Technologies hardware, including 34 6U CPCI SBCs with 6-core Intel Xeon E-2176M processors and 32GB DRAM, 34 SATA drive mounting kits, and 17 CPCI RTMs. The requirement is restricted to the original equipment manufacturer or authorized resellers to ensure compatibility with existing systems. The contract will be awarded as a firm-fixed-price purchase order, with a requested delivery date of September 30, 2027, to the Naval Surface Warfare Center Carderock Division Det Puget Sound in Silverdale, Washington. Quotations must be submitted by 10:00 AM EST on September 8, 2026. Evaluation is based on technical acceptability on a pass/fail basis, with the government reserving the right to review past performance for the lowest-priced, technically acceptable vendor. The contractor must comply with strict marking and labeling standards per MIL-STD-130 and MIL-STD-129, and provide unique item identifiers for qualifying hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to CMMC cybersecurity maturity model certification levels. All quotes must be submitted on company letterhead and include the contractor's CAGE code, business size, and estimated lead time for delivery.

POSTED

about 23 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAHZ

This presolicitation is for the procurement of eight circuit card assemblies under NSN 1H-5998-014953766-GL. The items are to be delivered to DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The government possesses full rights to the technical data package, and there are no manufacturing or tooling restrictions, making these parts candidates for full and open competition. This is a level 1 item that must be acquired from approved sources whose inspection systems conform to MIL-I-45208A or an equivalent standard certified by a joint DCMA/NAVSUP WSS survey team. The Department of Defense intends to solicit and negotiate with a single source under FAR 6.302-1, although all responsible sources may submit capability statements or proposals within 45 days of publication. This acquisition is designated as a total small business set-aside and is managed by the Navsup Weapon Systems Support in Mechanicsburg, Pennsylvania. The procurement is subject to the Buy American Act and various Free Trade Agreements. Interested parties can obtain necessary military specifications and standards through the DoD Single Stock Point or the ASSIST-Online portal.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

CIRCUIT CARD ASSEMB — 5998015434871 — N0038326QQB43

Solicitation # N0038326QQB43

The Department of the Navy, through the Navsup Weapon Systems Support office in Philadelphia, Pennsylvania, has issued solicitation N0038326QQB43 for the procurement of circuit card assemblies. The contract requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. The solicitation was posted on September 3, 2026, with a response deadline of October 5, 2026, at 8:30 PM. Performance of the contract is designated to take place in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Supply of Machine Screws (NSN 5305016964069)This subcontract involves the manufacture or sourcing of 126 machine screws under NSN 5305016964069 for prime contractors supporting the Department of Defense through the ASC Commodities Division. The contractor is responsible for delivering the units in accordance with the DLA Master List of Technical and Quality Requirements, specifically adhering to RP001 for packaging and RQ011 for identification standards. The project is categorized under NAICS code 334418 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 10, 2026, following the solicitation posted on September 2, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Pulsating Water Dampener Assembly (NSN 4610-01-464-4888)This subcontract involves the supply of pulsating water dampener assemblies for prime contractors supporting Department of Defense DLA Troop Support MRO contracts. The provider is responsible for manufacturing or procuring Part Number 801-7108407 ASSY 7, which requires the integration of multiple specific components to achieve a precise overall length of 14.000 inches. The final deliverable consists of two completed water purification filter assemblies. The contract is categorized under NAICS code 334418 and is managed by the Construction and Equipment MRO SVC I agency. To be eligible, the provider must maintain active SAM registration and ensure full compliance with FAR 52.211-5. Performance of the contract is centered in New Cumberland, Pennsylvania, with a response deadline of September 14, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Connector Assembly Supply (NSN 6060-01-719-5881)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of MS16208-139 Hardware

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of HIAB Spotlight Hardware

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Flat Cable (NSN 5420016023337)

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8119 Afsc Pzabc

Same awarding agency

B-2 Relay Assembly NSN: 5945-01-442-4318FW

Solicitation # FA811926R0008

Solicitation FA8119-26-R-0008 is a sole source spares buy contract issued by the Department of the Air Force, AFSC PZABC, for the procurement of four B-2 Relay Assemblies (NSN: 5945-01-442-4318FW). The relay assembly is an electromagnetic component with ESD sensitivity, consisting of various electronic parts including capacitors, resistors, and integrated amplifiers. This is a firm fixed price requirement with a delivery deadline of August 30, 2027. The procurement is unrestricted and open to small businesses under NAICS code 336412, with a DPAS rating of DO: A1. The solicitation has undergone multiple extensions, with the final response deadline established as September 18, 2026, at 8:00 PM UTC. Award is based primarily on price, and offerors must maintain firm pricing for 120 days. Key compliance requirements include ISO 9001-2015 quality standards, Item Unique Identification (IUID), and the posting of NIST SP 800-171 assessment scores in the Supplier Performance Risk System. Shipping is FOB Origin, with deliverables destined for the DLA Distribution Depot in Oklahoma. Invoicing and payment must be processed electronically via Wide Area WorkFlow.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 2 months

Repair of B-2 Transponder Set NSN: 5895-01-383-4052 FW P/N: 159000-7

Solicitation # FA8119-26-R-0011

The United States Air Force, through the Air Force Sustainment Center at Tinker AFB, is soliciting a firm-fixed price, indefinite-delivery requirements contract for the repair of B-2 Transponder Sets (NSN: 5895-01-383-4052 FW, Part Number: 159000-7). The contract structure consists of a three-year basic period, a two-year option period, and a six-month extension. The scope of work includes the disassembly, cleaning, inspection, maintenance, reassembly, and testing of the transponder sets to return them to a serviceable condition. Key deliverables include the repair of units, over and above work, data reporting, surge expedite fees, material lay-in, and repair management. Associated Aircraft Manufacturing and Sales, Inc. is identified as the only approved source for this repair due to their possession of the necessary data, tools, and certified personnel, and the acquisition is conducted under FAR Part 15 procedures. The contractor must adhere to high-level quality standards, including ISO 9001-2015 and AS9100, and comply with strict packaging and marking requirements such as MIL-STD-2073-1E and MIL-STD-130N for unique identification. All payment requests and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system. The period of performance begins upon contract award and concludes upon government acceptance of the services.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Packaging, Marking, and Shipping to Tinker AFBThe contract requires the provision of ESD-safe packaging, military-standard labeling, and secure shipment of a CCA unit to Tinker Air Force Base, ensuring full adherence to preservation and delivery protocols mandated by defense standards. All packaging must prevent electrostatic discharge damage, while labeling must comply with exact military specifications to ensure traceability, handling accuracy, and regulatory compliance throughout transit. The work is to be performed under a subcontract tied to the Department of Defense, with the place of performance designated as Coffeyville, and the NAICS code 561910 reflects its classification under other support activities for transportation. The unit must be delivered in alignment with federal preservation guidelines that protect against environmental degradation, corrosion, and physical damage during storage and transit. The contract does not specify a solicitation number or set-aside type, indicating it may be a direct award or blanket arrangement. The posting date indicates a future action, suggesting planning and preparation are underway for the delivery schedule. Compliance with these requirements is critical to meet the operational readiness standards of the receiving military facility, and failure to meet any detail could result in rejection or rework.

Packaging and Labeling Services

POSTED

DEADLINE

Functional Testing and Calibration of CCAThe contract requires the performance of functional testing, burn-in, and calibration on completed circuit card assemblies to verify that they meet the original equipment manufacturer’s specifications for the AN/GRN-29 ILS-M system. These processes are critical to ensuring the long-term reliability, stability, and operational accuracy of the hardware under real-world conditions prior to deployment. The work must be executed in accordance with stringent technical standards to guarantee compliance with military-grade performance requirements for this specialized navigation and landing system. The contract is classified as a subcontract under NAICS code 541380, which corresponds to other scientific and technical consulting services, and is managed by the Department of Defense through the FA8119 Afsc Pzabc office. The place of performance is designated as Coffeyville, with no specific state or ZIP code provided. Although no solicitation number or point of contact is listed, the posting date indicates the opportunity was made available on April 30, 2026, suggesting this is a future procurement opportunity requiring qualified contractors to be prepared for execution at that time.

Testing Laboratories and Services

POSTED

DEADLINE

Electronic Component Sourcing and Obsolescence ManagementThe contract pertains to the procurement of obsolete, end-of-life, or long-lead electronic components specifically for the CCA, with stringent requirements for full traceability and robust counterfeit mitigation measures. All sourced components must comply with established defense supply chain standards to ensure reliability, authenticity, and operational readiness in critical defense applications. The work is scoped under NAICS code 423620, indicating a focus on electronic parts and equipment wholesaling, and is structured as a subcontract under the Department of Defense, managed by FA8119 Afsc Pzabc. The place of performance is designated as S Coffeyville, suggesting the physical or operational footprint for deliverables or coordination activities. The contract emphasizes end-to-end accountability from sourcing through delivery, ensuring that each component meets the rigorous quality and compliance benchmarks essential for defense systems, even when dealing with hard-to-source or discontinued parts.

Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

DEADLINE