Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

59--CIRCUIT CARD ASSEMBLY

Awarded
SPE7M1-26-Q-1257Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of six circuit card assemblies identified by NSN 5998-14-502-2826 under solicitation SPE7M1-26-Q-1257, issued by the Department of Defense’s Maritime Supply Chain. The requirement is set aside exclusively for small businesses, and the response deadline is July 29, 2026, with a delivery timeframe of 215 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for this acquisition. The contract mandates strict configuration change management through Engineering Change Proposals and prohibits unauthorized deviations without formal variance requests. All supplies must comply with DLA packaging standards and require the removal of government identification from non-accepted items. The offeror must submit a complete data package including details for both the approved and alternate parts, as no data is currently available. Performance is expected at New Cumberland, Pennsylvania, with Ryan Snyder listed as the primary point of contact for inquiries.

General Info

Procure six circuit card assemblies under small business set-aside, delivery in 215 days, compliance with DLA standards, response due July 29, 2026.

Contract Value

$56,502.12

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

JGILS, LLC

Award Issued Date

Documents

2

Request for Quotations SPE7M1-26-Q-1257

PDF, High priority: read this firstrfq
High

SPE7M526P4830.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Office AddressCOLUMBUS, OH, 43218-3990, USA

Full Description

Show more
DLA award SPE7M526P4830 posted on DIBBS. Awardee: JGILS, LLC (CAGE 1N8T8) Total Contract Price: $56,502.12 Award Date: 08-27-2026 Solicitation: SPE7M1-26-Q-1257 Line items: - CIRCUIT CARD ASSEMBLY (NSN/Part 5998145022826, PR 7017441437)

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, STAN
Solicitation # SPE7M5-27-T-0997
Solicitation SPE7M5-27-T-0997, issued by the DLA Weapons Support Active Devices Division, is for the procurement of one standardized electronic module, identified by NSN 5963013531602 and Key Code CZJ. The requirement specifies a delivery timeline of 20 days with a required delivery date of October 13, 2026, shipped FOB Destination to the USS SEAWOLF SSN 21. The procurement is subject to strict quality and environmental standards, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and acceptance is based on zero non-conformances using sampling methods per MIL-STD-1916 or ASQ H1331. Critical technical requirements include mandatory DOD qualified Electrostatic Discharge and Electromagnetic Interference protective packaging per MIL-PRF-81705, with specific barrier materials from QPL-81705 manufacturers to prevent damage to leads and terminals. Marking must adhere to MIL-STD-129 with special marking code 39 for ESD sensitivity. Administratively, the contract requires CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for invoicing. Quotations are due by October 26, 2026, and must be submitted to the issuing office in Columbus, Ohio.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS