Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CLAMP ASSEMBLY

Active
SPE7L4-27-T-0237Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L4-27-T-0237 is issued by the Defense Logistics Agency (DLA) Weapons Support LSO Combat Vehicles and Armament for the procurement of clamp assemblies identified by NSN 5340-01-178-5427. The requirement includes multiple line items, specifically requesting 80 units for CLIN 0002 and 231 units for CLIN 0003. Delivery is specified as FOB Origin with a general timeframe of 127 days, with shipments directed to DLA Distribution centers in Barstow, California; New Cumberland, Pennsylvania; and Albany, Georgia. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must adhere to TQ Requirement IP025 and the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The acquisition falls under NAICS code 332510 and incorporates various DFARS and FAR clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

General Info

DLA solicitation for 311 clamp assemblies delivered to three US distribution centers.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332510 - Hardware Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE7L4-27-T-0237

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Deadline changed

Response deadline changed from Oct 23, 2026 to Oct 28, 2026.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Office AddressUSA
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP ASSEMBLY
CLAMP ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5340-01-178-5427 Quantity: 22 EA Purchase Request: 7018680317QTY: 333 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
Federal
MISC LINE HARDWARE FOR WEST FARGOThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of miscellaneous line hardware for West Fargo. This requirement is designated as a small business set-aside under NAICS code 332510, with the place of performance located in Oklahoma. The current incumbent contractor for these services is Energy by Native American Design Corp. Interested parties may coordinate with the Small Business Program Managers, Tetrault or Teves, regarding this upcoming acquisition.
Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
Federal
TRANSMISSION LINES HARDWARE FOR PIERRE SUBSTATION WAREHOUSE - FY26 FH-EB REBUILD PHASE 2The Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of transmission lines hardware to support the Pierre Substation Warehouse for the FY26 FH-EB Rebuild Phase 2. This requirement falls under NAICS code 332510 and is intended to secure necessary hardware components for critical infrastructure rebuilding efforts. The current incumbent contractor for this work is Energy by Native American Design Corp. Interested parties can coordinate with the Small Business Program Managers, Tetrault and Teves, regarding this upcoming acquisition.
Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
Federal
MMO: HARDWARE RESTOCK FOR FORT PECK WAREHOUSEThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a hardware restock project for the Fort Peck Warehouse. This procurement effort falls under NAICS code 332510 and is intended to replenish essential hardware supplies necessary for warehouse operations. Short Powerline Service, LLC is listed as the incumbent contractor for these services. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this upcoming requirement.
Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
Federal
HARDWAREThis forecast opportunity for hardware is issued by Federal Prison Industries under the Department of Justice. The contract is designated as a Small Business Total Set-aside and falls under NAICS code 332510. The place of performance for this requirement is located in Bensenville, Illinois. Robert L. Connolly serves as both the primary point of contact and the Small Business Specialist for this action. Liberty Fasteners is listed as the incumbent contractor. Interested parties can find further details through the Department of Justice forecast contracting opportunities portal.
Inc Federal Prison Industries

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
Manufacture and Supply of Straight Headle Pins
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-27-T-1139
Solicitation SPE7L1-27-T-1139 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 32 angle brackets, identified by NSN 5340-01-475-4604. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of March 23, 2027, and a delivery period of 130 days. Shipping is designated as FOB Origin, and inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to strict technical and quality requirements outlined in the DLA Master List, including specific packaging and palletization standards under RP001 and MIL-STD-129. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training. Additional compliance mandates include DFARS 252.204-7012 for safeguarding covered defense information, CMMC Level 2 certification, and adherence to the Buy American Act and Berry Amendment. A price evaluation preference is available for certified HUBZone Small Business Concerns.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-27-T-1026
Solicitation SPE7L1-27-T-1026 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 57 mounting brackets, identified by NSN 5340-01-294-2716. The required delivery date is June 23, 2027, with a delivery period of 172 days after order. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution Depot at Tinker AFB, Oklahoma. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training to access technical data. Compliance with the Berry Amendment, Buy American Act, and CMMC Level 2 cybersecurity standards is required. Packaging must adhere to ASTM D3951 for non-hazardous materials and MIL-STD-129 for marking and labeling. Evaluation may include a price preference for certified HUBZone small business concerns, and the buy may be eligible for automated award.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-27-T-4739
Solicitation SPE4A6-27-T-4739 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 56 units of cotter pins, identified by NSN 5315-00-187-9379. The items are designated as critical application items and must adhere to technical data drawings and standards, including NASM24665 and ASME B18.8.1. The procurement is managed under the First Destination Transportation program with an origin-based inspection and acceptance point. The need ship date is April 6, 2027, with a final required delivery date of July 13, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and traceability standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Material must meet NAVAIR Aircraft Launch and Recovery Equipment traceability requirements, and bare item markings must include the contract number, NAWC CAGE, and part number. Packaging must follow RP001 DLA requirements and MIL-STD-129, with a total prohibition on the use of mercury or mercury compounds in preservation and packing. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and submission of quotes through the DLA Internet Bid Board System. The solicitation includes a price evaluation preference for certified HUBZone small businesses and requires compliance with the Buy American Act and the Berry Amendment. Additionally, the contractor must adhere to cybersecurity standards per DFARS 252.204-7012 and provide representations regarding covered defense telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST AN
Solicitation # SPE7L1-27-T-1348
Solicitation SPE7L1-27-T-1348 is a Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of seven protective caps designed for dust and moisture sealing, identified by NSN 5340-01-735-0051. The requirement specifies a delivery timeline of 20 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination, specifically the Pearl Harbor Naval Shipyard IMF in Hawaii. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) under NAICS code 332510. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Key regulatory requirements include a prohibition on Class I ozone depleting chemicals and compliance with CMMC Level 2 Self-Assessment and DFARS 252.204-7012 for safeguarding covered defense information. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding equal opportunity, sustainable products, and prohibitions on the acquisition of items from Communist Chinese military companies.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-27-T-4784
Solicitation SPE4A6-27-T-4784 is a request from the DLA Weapons Support ASC Commodities Division for the procurement of 20 units of blind rivets, identified by NSN 5320-00-189-8722 and part number NAS1738B5-8. The items must adhere to the NAS1738 Revision 6 and NAS1740 Revision 10 standards. Delivery is required within 164 days after receipt of the order, with a need ship date of April 6, 2027, and a final required delivery date of May 18, 2027. The shipment is FOB Origin and will be delivered to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, and manufacturers must maintain a quality system complying with SAE AS9003 or ISO 9001. Invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the solicitation includes a price evaluation preference for SBA-certified HUBZone small businesses and requires adherence to the Buy American Act and Berry Amendment for domestic sourcing. All quotes must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-27-T-1345
Solicitation SPE4A7-27-T-1345 is a federal procurement issued by the Defense Logistics Agency Weapons Support ASC Supplier OE and AF Div for the acquisition of 97 units of SHIM, identified by NSN 5365-01-338-4179. The contract is established under the First Destination Transportation program with a delivery timeframe of 171 days after the order is placed, with the place of performance and delivery located in Phoenix, Arizona. The procurement is governed by NAICS code 332510 and requires the contractor to adhere to strict quality and marking standards, including MIL-STD-129 and MIL-STD-130, and specifically prohibits the use of the Boeing CAGE code on parts. Key compliance requirements include CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. The item is subject to export controls under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Inspection and acceptance will occur at the origin, with the manufacturer's quality system required to comply with SAE AS9003 or ISO 9001. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment, and all quotes must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-27-T-0892
Solicitation SPE7L1-27-T-0892 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 29 units of spring tension clips, identified by NSN 5340-00-071-9740. The delivery lead time is 95 days after receipt of order, with a need ship date of October 8, 2026, and a final required delivery date of April 15, 2027. Shipping is FOB Origin, with the destination and acceptance point located at the DLA Distribution Barstow Central Receiving Warehouse in California. Invoicing must be processed electronically through the Wide Area WorkFlow system. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and adherence to the DLA Master List of Technical and Quality Requirements. Because the item contains technical data subject to ITAR or EAR export controls, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization. Packaging must comply with MIL-STD-129 for marking and ASTM D3951 for non-hazardous materials, while hazardous materials must follow TQ requirement IP025. Award eligibility includes a price evaluation preference for SBA-certified HUBZone small businesses, and contractors must comply with the Buy American Act and Berry Amendment domestic sourcing restrictions.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
PINTLE ASSEMBLY, TOWING
Solicitation # SPE7L4-27-T-0372
Solicitation SPE7L4-27-T-0372 is a fixed-price request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of five pintle assemblies for towing, identified by NSN 2540017384356. This acquisition is designated as a total small business set-aside under NAICS code 336360. The required delivery date is April 18, 2027, with a need ship date of April 6, 2027, and a delivery lead time of 164 days after order. Shipping is FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Offerors are prohibited from using additive manufacturing processes for these parts. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. Compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is required. Quotations were due by October 23, 2026.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
LOCK, GUN SAFETY
Solicitation # SPE7L4-27-T-0246
Solicitation SPE7L4-27-T-0246 is a federal procurement issued by the Defense Logistics Agency (DLA) for the acquisition of three gun safety lock assemblies. The items are designated as critical application items, identified by NSN 1005013462644 and General Dynamics Land Systems Inc. part number 12549784. The contract is established under NAICS code 332510, with delivery required within 164 days of award, targeting a need ship date of April 6, 2027, and a final required delivery date of May 31, 2027. Shipping is set as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The procurement includes stringent technical and security requirements, including CMMC Level 2 Self-Assessment and compliance with demilitarization standards for small arms weapon parts. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Inspection and acceptance will occur at the destination. Administrative requirements mandate the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336350
New
DIBBS
COVER, FITTED, VEHICULAR
Solicitation # SPE7L4-27-T-0359
Solicitation SPE7L4-27-T-0359 is a fixed-price contract issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 32 fitted vehicular body covers (NSN 2540-01-643-8472). This is a total small business set-aside under NAICS code 336350, with a required delivery date of April 27, 2027, to the DDSP New Cumberland facility in Pennsylvania. The procurement is managed under the First Destination Transportation program to optimize shipping costs through government-arranged transportation. This is a restricted source item requiring engineering source approval by the government design control activity. Alternate offerors must provide extensive documentation, including all manufacturing drawings, process sheets, and a shock extension report per MIL-S-901. If original equipment manufacturer drawings are unavailable, a detailed engineering analysis or reverse engineering report is required. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with destination inspection required per FAR 52.246-2 and sampling conducted according to MIL-STD-1916 or ASQ H1331. Compliance requirements include adherence to the Berry Amendment and Buy American Act for domestic sourcing, as well as DFARS 252.204-7012 for safeguarding covered defense information. Packaging and marking must follow MIL-STD-129 and RP001 standards. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment processing is handled through the Wide Area WorkFlow (WAWF) system. Items produced using additive manufacturing are ineligible for award.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336211
New
DIBBS
SCREEN, COOLER
Solicitation # SPE7L4-27-T-0268
Solicitation SPE7L4-27-T-0268 is a total small business set-aside issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 121 cooler screens, identified by NSN 2510-01-433-8705. This critical application item is associated with part numbers 388010050-2 from Tecmotiv (USA), Inc. and E9AR106-078-2 from Renk America LLC. The procurement is categorized under NAICS code 336211, with quotes required to be submitted via the DIBBS system. The contract specifies a delivery period of 164 days, with a need ship date of April 6, 2027, and an original required delivery date of July 19, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Anniston in Alabama. Packaging must adhere to ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including mandates for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Offerors are encouraged to provide quantity ranges in their quotes to accommodate volatile demand.
Motor Vehicle Body Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
DIBBS
BAR, HINGE
Solicitation # SPE7L4-27-T-0236
Solicitation SPE7L4-27-T-0236 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of eight hinge bars, identified by NSN 5342011692414 and General Dynamics Land Systems Canada part number 10502047. The contract specifies a delivery period of 164 days, with a need ship date of April 6, 2027, and an original required delivery date of May 3, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Contractors must adhere to the Buy American Act and Berry Amendment regarding domestic material sourcing and utilize the Wide Area WorkFlow system for electronic invoicing. The solicitation is categorized under NAICS code 332994, and quotes were due by October 23, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336360
New
DIBBS
RADIATOR, VEHICULAR COM
Solicitation # SPE7L4-27-T-0296
Solicitation SPE7L4-27-T-0296, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is for the procurement of vehicular compartment heater radiators under NSN 2540014793409. The requirement consists of two line items totaling 21 units, with 3 units destined for DLA Distribution Albany, Georgia, and 18 units for DLA Distribution New Cumberland, Pennsylvania. The items are associated with part numbers 072508001 from Therma-Tech Engineering Inc and 8HB953 from Oshkosh Defense LLC. Delivery is required within 164 days, with an original required delivery date of February 27, 2027, and a need ship date of April 6, 2027. Terms are FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. All DLA Master List technical and quality requirements take precedence over commercial standards. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and payment. It incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity assessments, and the safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System under NAICS code 336360.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336390
New
DIBBS
COVER, VEHICULAR COMPON
Solicitation # SPE7L4-27-T-0329
Solicitation SPE7L4-27-T-0329 is a fixed-price procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for 12 units of vehicular component covers, identified by NSN 2590-01-604-5797. The requirement specifies parts from DP Manufacturing Inc. (P/N 13169) or Oshkosh Defense LLC (P/N 3KK234). The need ship date is April 6, 2027, with an original required delivery date of May 30, 2027. Delivery is set as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and ASTM D3951, with palletization following DLA requirement RP001. Hazardous materials must be labeled per the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS 252.204-7012 for safeguarding covered defense information. The solicitation is open to offerors under NAICS code 336390, with a response deadline of October 23, 2026, and all quotes must be submitted through the DLA Internet Bid Board System.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7L4-27-T-0352
Solicitation SPE7L4-27-T-0352 is a fixed-price procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the supply of 1,197 self-locking hexagon nuts under NSN 5310015930015. The requirement references part numbers 9A065645 from Modine Manufacturing Co and 24KP974 from Oshkosh Defense LLC. Delivery is required within 164 days of award, with a need ship date of April 6, 2027, and an original required delivery date of May 25, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements (RA001) takes precedence over ASTM standards. Palletization must follow RP001 guidelines. Administrative requirements include electronic invoicing and receiving reports via the Wide Area Workflow (WAWF) system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS restrictions on covered defense telecommunications equipment and the use of hexavalent chromium. Offerors must be registered in the System for Award Management (SAM) and comply with NAICS code 332722 size standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-27-T-0251
Solicitation SPE7L4-27-T-0251 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 61 vehicular door latches, specifically identified as loader escape hatch latches (NSN 2540-01-418-6275). The contract requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania, with a delivery period of 164 days and a required delivery date of August 11, 2027. The procurement is subject to origin inspection and acceptance, requiring the manufacturer to maintain a quality system compliant with SAE AS9003 or ISO 9001. The contract incorporates stringent technical and quality requirements from the DLA Master List, including specific packaging standards under RP001 and marking requirements per MIL-STD-129. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Financial administration is handled through the Wide Area WorkFlow system. Evaluation preferences are provided for HUBZone Small Business Concerns, and offerors must comply with the Buy American Act and Berry Amendment domestic sourcing restrictions. Additionally, the solicitation mandates adherence to CMMC Level 2 cybersecurity standards and requires the submission of Safety Data Sheets for any hazardous materials to remain eligible for award.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-27-U-0038
Solicitation SPE7L4-27-U-0038 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of gaskets, identified by NSN 5330-00-526-6197 and part number 2046-2 from Aerosonic Corp. The government intends to award a unilateral Simplified Indefinite-Delivery Contract to a single responsible offeror with a maximum contract value of 350,000.00 dollars. The estimated annual requirement is 23 units, with a delivery period of 107 days after order. This item is classified as a commercial item under NAICS code 339991. Technical specifications strictly prohibit the use of asbestos as defined in FED-STD-313. The gaskets must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1 to prevent ultraviolet deterioration. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, while palletization must follow DLA requirement RP001. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must submit quotes via the DLA Internet Bid Board System by October 23, 2026. The contract incorporates various FAR and DFARS clauses, including mandates for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and prohibitions on the acquisition of covered defense telecommunications equipment.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336211
New
DIBBS
SUPPORT, RADIATOR
Solicitation # SPE7L4-27-T-0278
This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is for the procurement of radiator supports under NSN 2510-01-461-0562. The requirement consists of two line items totaling 87 units, with 14 units for CLIN 0001 and 73 units for CLIN 0002. The delivery for CLIN 0002 is specified as 196 days after the order, with a need ship date of May 8, 2027, and a required delivery date of May 19, 2027. Deliveries are directed to DLA Distribution centers in Tracy, California, and Albany, Georgia, with shipping terms established as FOB Origin. The contract is classified under NAICS code 336211 and requires compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Quotations are due by October 23, 2026.
Motor Vehicle Body Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSION
Solicitation # SPE7L4-27-U-0039
Solicitation SPE7L4-27-U-0039 is a total small business set-aside issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of helical torsion springs, NSN 5360-00-276-3438. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 4 units. The procurement is conducted under the First Destination Transportation program with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. Quotations are due by October 23, 2026, and the contract may be eligible for automated award. The contractor must adhere to strict technical and quality requirements found in the DLA Master List, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone depleting chemicals, mercury, and asbestos. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. Additionally, the contract incorporates various FAR and DFARS clauses regarding cybersecurity, including NIST SP 800-171 and CMMC Level 2 requirements, as well as domestic material restrictions under the Buy American Act and the Berry Amendment.
Spring Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS