Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLAMP, LOOP

Active
SPE7L1-26-T-954BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7L1-26-T-954B, is issued by the Department of Defense Land Supply Chain for the procurement of 75 loop clamps. The items are identified by NSN 5340-01-260-7833 and part number TA02121PH-05HB, manufactured by TA MFG INC in Glendale, California. The delivery requirement is set for 20 days after receipt of order, with the place of performance located at Dyess AFB. The contract is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, it includes a requirement for the removal of government identification from any non-accepted supplies. The solicitation was posted on August 11, 2026, with a response deadline of August 24, 2026, under NAICS code 332439.

General Info

DoD procurement of 75 loop clamps for Dyess AFB, delivery within 20 days.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

110 3RD ST BLDG 7004, DYESS AFB, TX, 79607-1510, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-954B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,LOOP
CLAMP,LOOP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TA MFG INC (84971)
GLENDALE CA
P/N TA02121PH-05HB
ADEQUATE DATA FOR NSN/Part Number: 5340-01-260-7833 Quantity: 75 EA Purchase Request: 7017821500QTY: 75 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-887Z
The contract is for the procurement of 42 mounting brackets with NSN 5340-01-110-4018 under solicitation SPE7L1-26-T-887Z, with a required delivery within 112 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, and its disclosure to foreign persons, regardless of location, is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The place of performance is New Cumberland, Pennsylvania, and the point of contact is Michael Nordahl, reachable via email or phone provided. The solicitation opens on July 28, 2026, with responses due by August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1184
The contract pertains to the procurement of a Modification Kit, SH with part number 55258 and NSN 8145015120930, classified as a commercial item, supplied by SHARKCAGE INC. from Spring Branch, TX. Two separate line items are specified: one for ten units at $10.00 each under PR 7017643970, and another for ten units at $32.00 each under PR 7017639102, both with identical technical specifications and delivery terms. Delivery is required within ten days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 labeling and DLA Packaging Requirements for Procurement (RP001), with palletization following mandated guidelines. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Shipment must be executed via the fastest traceable means, excluding parcel post, to two distinct delivery points: Fort Drum, NY for the first line item and Fort Bliss, TX for the second. The contract is issued under solicitation SPE8ED-26-T-1184 with an original required delivery date of July 23–24, 2026, and includes specific markings, tracking numbers, project identifiers, and government-only codes for logistics and accountability.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332439
New
DIBBS
CUSHIONING MATERIAL
Solicitation # SPE8ED-26-T-1261
This solicitation from the Department of Defense, issued by the Defense Logistics Agency, is for the procurement of 20 units of cushioning material under part number 8145-01-728-6188. The contract requires delivery within 115 days after receipt of order and is associated with NAICS code 332439. Performance is located in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract contains technical data subject to ITAR and EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-953S
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
DRUM, HAZARDOUS MATE
Solicitation # SPE8ED-26-T-1190
The contract awards 12 steel hazardous material drums with a rated capacity of 322 liters (85 gallons) and a minimum internal volume of 335 liters (88.4 gallons), each meeting strict dimensional and structural specifications including a minimum height of 965 mm (38 inches), an inside diameter of 660 mm (26 inches), and a minimum material thickness of 1.0 mm. Each drum must feature a full removable head with one 50.8 mm (2 inch) and one 19.05 mm (0.750 inch) bung, secured by a locking ring no thinner than 2.40 mm and bolts no thinner than 15.875 mm, all installed to prevent loss during transit. The exterior must be coated with a rust-inhibiting finish that survives 96 hours of salt spray testing per ASTM B-117 without rust creep, blistering, or adhesion loss beyond 1/8 inch of a scribe mark, with acceptable colors limited to specific FED STD 595 shades. The interior must be coated with a corrosion-inhibiting enamel, and the entire drum must be tested and marked in compliance with UN/POP 1A2/X440/S and 49 CFR 178 Subparts L and M for hazardous materials transport. Packaging must conform to ASTM D3951 and be palletized per DLA’s RP001 requirements to ensure physical and mechanical protection during shipment and storage, with all markings applied per MIL-STD-129. The contract specifies delivery of the drums FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with an original required delivery date of November 29, 2026, and a need ship date of January 18, 2027. Inspection and acceptance occur at the destination, and payment will be processed via Wide Area WorkFlow. The unit price is $12.00 per drum, totaling $144.00, with zero variance allowed in quantity. The contract includes mandatory clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, prohibition of hexavalent chromium, export control, electronic payment submissions, safeguarding of contractor information systems, and default provisions. Offerors must comply with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332439
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1265
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1262
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
SHIPPING AND STORAGE C
Solicitation # SPE2DS-26-T-329E
This contract is for the procurement of ten olive drab portable shipping and storage containers under solicitation SPE2DS-26-T-329E for the Department of Defense. The required units must be rectangular plastic polyethylene containers measuring 33 by 17 by 14 inches, featuring rainproof construction, two removable insert trays, built-in molded wheels, and locking capabilities. Delivery is required within 20 days after the order is received. All items must adhere to commercial packaging standards, utilizing sealed unit containers and exterior shipping containers to ensure safe delivery at the lowest carrier rate. Compliance with Medical Marking Standard No. 1 is mandatory, superseding MIL-STD-129. The procurement is subject to DLA packaging requirements and specific technical and quality standards as outlined in the DLA Master List.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AN
Solicitation # SPE8ED-26-T-1186
The contract pertains to the supply of a cradle kit with NSN 8145015121025 and part number 150475, issued under solicitation SPE8ED-26-T-1186 by the Defense Logistics Agency. It includes three line items totaling four units, each priced at $1.00 or $2.00 per unit, with mandatory delivery within ten days of order placement under FOB origin terms. All items must be packaged in accordance with ASTM D3951, but must fully comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements RP001. Each shipment is designated for specific military locations in South Korea, including Camp Humphreys, Camp Casey, and Camp Carroll, with detailed freight and marking instructions provided for each destination. Inspection and acceptance occur at the final destination, and no quantity variance is permitted. The contract incorporates directives related to covered defense information and requires removal of government identification from non-accepted supplies. The supplier, SharkCage Inc. located in San Antonio, Texas, is responsible for meeting all technical, quality, and delivery obligations as defined by the DLA, with a required delivery date of July 23 to July 24, 2026, depending on the destination.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVB96
This contract, issued by the Department of Defense through DLA Aviation at Philadelphia, solicits the manufacture of a specialized container identified by drawing number 530E001-501, Revision Latest, with an aluminum shell, and requires strict adherence to detailed technical, quality, and compliance standards. The item must be produced using SAE-AS22759 wire in place of prohibited MIL-W-81381 wire, with welding performed per AWS D1.2 for aluminum and other applicable standards, including strict controls on filler materials, cleaning, deoxidizing, and weld inspection. All containers must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and a sequential serial number starting at 0001 must be applied via nameplate. The procurement mandates a First Article Test (FAT) to verify compliance with dimensional, functional, and performance requirements, including an initial and final leak test using 1.00 ± 0.05 psig pressure, an 18-inch free-fall drop test on concrete, and form and fit validation using the designated end-item. The contractor bears all costs associated with FAT submission, shipping, and retesting if rejected, and must deliver one sample to the Naval Weapons Station Earle facility within 60 calendar days of contract award. The solicitation requires full compliance with Buy American provisions, restrictions on cadmium plating (replaced with ASTM B841 Zinc-Nickel Alloy finish), and adherence to IPC-J-STD-001 and IPC-A-610 Class 3 standards where MIL-STD-454 is referenced. Work instructions must be posted at each workstation, materials must be segregated and certified, and all cleaning processes must avoid sodium hydroxide and iron-containing abrasives to prevent corrosion. A waiver for First Article Testing is available only to prior approved suppliers who can demonstrate identical production within the last three years at the same facility without any non-conformances or waivers, and such offerors must submit dual pricing. All production units are subject to a 100% free-fall drop test, and any container exceeding three broken rivets or showing cracked welds will be rejected. The closing date for proposals has been extended to August 11, 2026, and all submissions must be made through the designated portal. The contract is unrestricted as to small business set-aside and includes clauses supporting workplace equity, security
Pa DLA Aviation At Philadelphia

POSTED

about 7 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332439
New
Federal
N00174-26-SIMACQ-W61-0015 40ft ISO container (side opening with D-Rings)
Solicitation # N0017426Q1095
The Naval Surface Warfare Center Indian Head Division is seeking to award a firm-fixed-price purchase order under Simplified Acquisition Procedures for two 40ft ISO side-opening shipping containers with 7ft roll doors, shelf and pipe brackets equipped with T-bars, and twenty D-rings with metal backing plates for securing ordnance handling equipment during transport, as specified for the Standard Missile weapons program. This solicitation, identified as N0017426Q1095, is a total small business set-aside under NAICS code 332439 with a small business size standard of 500 employees, and is conducted in accordance with FAR Subpart 12.201 as supplemented by Revolutionary FAR Overhaul provisions and applicable Defense Federal Acquisition Regulation Supplement updates through DPN 20260507. Bidders must submit technical proposals that strictly conform to the exact brand and specifications detailed in the Statement of Work, with the Government evaluating all timely responses on a Lowest Price Technically Acceptable basis without discussions, awarding to the most advantageous offer that meets all mandatory requirements. Quotes are due by July 17, 2026, at 10:00 AM EST and must be emailed to Jodi L. Fields and Lawrence J. Connell, including a cover sheet with the company’s official name, point of contact details, Unique Entity Identifier, and CAGE Code. Delivery of the items is scheduled for no later than May 31, 2027, to Picatinny Arsenal, New Jersey, under FOB Contractor Destination terms. Offerors must comply with stringent cybersecurity requirements, including submission of current CMMC Unique Identifiers in the Supplier Performance Risk System, adherence to NIST and NSA-approved cryptographic standards, implementation of least privilege controls, annual user privilege audits, and validation of compliance with 32 CFR part 170. Additionally, all offerors must address potential organizational conflicts of interest by either providing a detailed mitigation plan or affirming the absence of any conflict, along with maintaining current representations in the System for Award Management. Contract administration requires electronic invoicing through Wide Area WorkFlow (WAWF), mandatory email notification of WAWF submissions to the contracting officer and COR, and final inspection and acceptance at the destination site by the Technical Point of Contact, Christopher Workman. The contract incorporates several FAR and DFARS clauses, including F.o.b. Origin, Termination for Convenience, Security Prohibitions, Sub
Nswc Indian Head Division

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332439
New
DIBBS
Manufacturing of Multiple-Leg Lifting SlingsThe contract requires the fabrication of two multiple-leg lifting slings conforming to MIL-DTL-32108 Revision D, each with a 126-inch leg length and specified in yellow color. The work must include full compliance with military inspection, packaging, and labeling standards to ensure readiness for DoD use. The slings are classified under NAICS code 332439, indicating they fall within the category of other forged and stamped metal product manufacturing, and the performance location is designated as FPO with zip code 96616. Submission of proposals is due by August 21, 2026, and the contract is structured as a subcontract under the Department of Defense's Construction & Equipment Manu & Con agency. The opportunity was posted on August 10, 2026, and is accessible via the DIBBS platform for qualified subcontractors to respond.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L1-26-T-956A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one remote control lever under NSN 3040-01-699-4021. The contract is open for full and open competition with a response deadline of August 24, 2026. Delivery is required within 20 days after the order is placed, with the place of performance located in Mechanicsburg, Pennsylvania. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from any non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory handling training to access the data. Covered defense information regulations also apply to this acquisition.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-900R
This contract is for the procurement of a replacement cover identified by NSN 5340017328379 and part number TA486-RC-1841, with a quantity of 66 units to be delivered FOB origin within 151 days of contract award. The item is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization. Marking must follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA guidelines. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for both freight shipping and parcel post. The contract imposes a strict prohibition on the use of Class I ozone-depleting chemicals, overriding but not relaxing any product specifications, and any substitute chemicals require prior approval. The unit price is $66.00 per unit, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The procurement is governed by DLA procedures for transportation and freight, and all references to units of issue must align with ANSI X12 standards. The solicitation was issued on July 30, 2026, with a response deadline of August 10, 2026, and the original required delivery date is January 9, 2027.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-951A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 20 helical compression springs under NSN 5360-00-967-4838. The contract requires delivery within 164 days after order and is categorized under NAICS code 332510. Performance is designated for Phoenix, Arizona, with the response deadline set for August 21, 2026. The contractor must adhere to several technical and quality requirements, including DLA packaging standards, source approval request documentation, and the removal of government identification from non-accepted supplies. Strict compliance is required regarding supply chain traceability documentation and environmental restrictions, specifically prohibiting the use of asbestos and Class I ozone-depleting chemicals. Any substitute materials must be submitted for official approval.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7L1-26-T-955T
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 30 helical extension springs under NSN 5360-01-198-3361. The contract requires delivery within 56 days after the order is placed and specifies that performance will take place in Greensboro. The solicitation was posted on August 11, 2026, with a response deadline of August 24, 2026. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any supplies that are not accepted. Interested parties may contact George Mitchell for further information regarding this federal acquisition.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L1-26-T-952E
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two packing retainers, part number D-3927, under NSN 5330-01-264-1097. The contract requires delivery within five days after receipt of the order and specifies that the items must be free of asbestos and intentionally added mercury, with specific exceptions for functional mercury in approved systems. The agreement incorporates DLA packaging requirements and technical standards as outlined in the DLA Master List of Technical and Quality Requirements. Compliance with the removal of government identification from non-accepted supplies is mandatory. The solicitation is managed by Kristina Derry and is associated with performance at Wheeler Army Airfield.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
SPROCKET, AMMUNITION
Solicitation # SPE7L1-26-T-951J
This contract is a solicitation issued by the Department of Defense Land Supply Chain for the procurement of 25 ammunition handling sprockets, identified by NSN 1005015593126 and part number 157D3853 from General Dynamics-OTS, Inc. The agreement specifies a strict delivery timeline of five days after order, with FOB origin for delivery, inspection, and acceptance. Shipping is destined for a facility in Bogota, Colombia, and must adhere to MIL-STD-129 marking and RP001 DLA packaging requirements. The contract includes several critical regulatory and technical mandates, including CMMC Level 2 self-assessment and the application of Covered Defense Information. It also requires compliance with demilitarization standards for small arms weapons and parts under Category I munitions lists. All technical and quality requirements are governed by the DLA Master List, and the government has explicitly stated that surplus items are not acceptable for this specific national stock number.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
LIGHT, IGNITION TIMI
Solicitation # SPE7L1-26-T-952Q
This contract, identified by solicitation number SPE7L1-26-T-952Q, is for the procurement of two ignition timing lights, specifically Brunswick Corp part number 91-99379 and NSN 4910-01-512-7978. The order is issued by the Department of Defense Land Supply Chain and requires delivery within five days. The items are to be shipped FOB Origin to the PA ARNG FMS 4 facility in Collegeville, Pennsylvania, using the fastest traceable means. Compliance with DLA packaging requirements is mandatory, specifically adhering to RP001, ASTM D3951, and MIL-STD-129 for marking and labeling. The contract incorporates technical and quality requirements from the DLA Master List and specifies that any government identification must be removed from non-accepted supplies. Inspection and acceptance will take place at the destination.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-953B
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one O-ring under part number 5331-01-617-0488. The contract requires delivery within five days after the order is received and specifies that the item must be free of asbestos as defined in FED-STD-313. Performance is designated for Fort Carson, and the procurement falls under NAICS code 339991. The supplier must adhere to strict packaging and quality standards, specifically requiring the item to be sealed in a medium duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117 to prevent deterioration from ultraviolet rays. The contract incorporates DLA master list technical and quality requirements and explicitly excludes the item from the First Destination Packaging Program and Standard Commercial Packaging.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-953F
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-953F, is for the procurement of one gasket, identified by NSN 5330-01-719-3209. The item is to be delivered to the Mayport Naval Station within five days after the order is received. The response deadline for this requirement is August 24, 2026. The contract mandates strict adherence to DLA technical and quality requirements, specifically referencing RA001, RP001 for packaging, and RQ011 regarding the removal of government identification from non-accepted supplies. Critical material restrictions are in place, prohibiting the use of Class I ozone-depleting chemicals and asbestos. Any substitute chemicals or alternative materials must be submitted for formal approval unless they are already authorized by the specification requirements.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
LEAF, BUTT HINGE
Solicitation # SPE7L1-26-T-891A
The contract is for the procurement of 101 units of LEAF, BUTT HINGE with NSN 5340-01-043-6173 under solicitation SPE7L1-26-T-891A, issued as a Women-Owned Small Business Set-Aside under NAICS code 332510. Delivery is required 126 days after order at Tinker AFB, Oklahoma, with FOB Origin terms placing all transportation costs and risks on the contractor until goods are loaded. The contract incorporates stringent technical, quality, and packaging requirements referenced from the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for shipping and labeling, MIL-STD-130N for permanent identification marking of military property, and ASTMD3951 for commercial packaging compliance. All items must be marked with the NSN, part number, manufacturer’s CAGE code, date of manufacture, and “FOR MILITARY USE ONLY,” and include machine-readable Data Matrix barcodes. Compliance with export control regulations is mandatory, as the item involves technical data subject to ITAR or EAR, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification and completed DLA training. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval. Packaging must adhere to DLA packaging requirements and hazardous material handling standards under FED-STD-313 and 29 CFR 1910.1200, with full MSDS documentation submitted. Inspection and acceptance occur at the destination by government personnel, and invoicing must be submitted exclusively through Wide Area WorkFlow. The contract includes multiple FAR and DFARS clauses addressing small business representation, equal opportunity, trafficking in persons, employment eligibility, hazardous materials, sustainable products, NIST SP 800-171 cybersecurity assessment deviations, subcontracting for commercial items, whistleblower rights, and government data control. No pricing is provided in the solicitation, and while historical unit costs exist, they cannot be used for current pricing. Contract award methodology and type are not specified, but the contract type clause is present with a placeholder for completion. All submissions must be made electronically via DIBBS by the response deadline of August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
HINGE HALF
Solicitation # SPE7L1-26-T-886N
The contract pertains to the supply of 18 units of HINGE HALF with NSN 5340-01-472-0836, under solicitation SPE7L1-26-T-886N, with a response deadline of August 10, 2026, and a required delivery within 116 days after order. The product is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of asbestos; any alternatives require formal approval per Clause L30. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The contract is administered by the Department of Defense’s Land Supply Chain, with performance location in San Diego, California, and primary point of contact Michael Nordahl at dla.flbc2prs@dla.mil.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L1-26-T-954N
This contract is for the procurement of 19 remote control levers, identified by NSN 3040-01-679-0878 and part number AL4000206. The items are to be delivered to Fort Benning, Georgia, with a delivery timeframe of 20 days. The agreement specifies that the shipping method must be the fastest traceable means and explicitly prohibits the use of parcel post. The contract mandates strict adherence to environmental and quality standards, specifically prohibiting the use of Class I ozone-depleting chemicals. All packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the terms are set as FOB Origin.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details