Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLAMP, LOOP

Active
SPE7L1-26-T-917NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.

General Info

Procure 346 clamp and loop units FOB origin by Dec 15, 2026, compliant with MIL-STDs and DLA packaging rules.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-917N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,LOOP
CLAMP,LOOP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
FULL AND OPEN COMPETITION APPLY
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
"CERTIFICATE OF QUALITY COMPLIANCE IS MANDATORY"
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
SPE7L1-26-T-917N
SECTION B
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 6208671 REVISION NR H DTD 03/31/2011 PART PIECE NUMBER: 7520880
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 7520880 REVISION NR 06 DTD 06/10/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017234123 0001 EA 346.000
NSN/MATERIAL:5340010304980
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
SPE7L1-26-T-917N
SECTION B
PR: 7017234123 PRLI: 0001 CONT’D
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/15/2026 Original Required Delivery Date:11/25/2026
SPE7L1-26-T-917N NSN/Part Number: 5340-01-030-4980 Quantity: 346 EA Purchase Request: 7017234123QTY: 346 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-12TZ
This contract specifies the procurement of 3 hundred-count units of blind rivets under NSN 5320-01-033-8176, with a unit of issue of HD (100), requiring strict compliance with technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application component and must conform to non-government standards NAS9304 Rev 7, NAS1686 Rev 5, and Quality Assurance Provision 13873, with inspections performed at origin and acceptance determined there as well. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels corresponding to AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. All packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. Delivery is due in 165 days FOB origin to Hill Air Force Base, Utah, with a required ship date of January 26, 2027, and original delivery date of March 21, 2027. The contractor must provide a Certificate of Quality Compliance and ensure all materials bear proper physical identification per RQ017, with government identification removed from non-accepted items per RQ011. Packaging and marking must meet all DLA mandates that supersede industry standards, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is managed under solicitation SPE4A6-26-T-12TZ, with primary point of contact Debra Fowler, and the solicitation was issued on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 332510 and is sourced through the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12TL
The contract pertains to the procurement of 31 screw thread inserts under NSN 0001S00000052, with a delivery requirement of 541 days after date of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to Cybersecurity Maturity Model Certification Level 2 compliance, DLA packaging standards, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Physical identification of the bare item is required, though Item Unique Identification is waived based on service customer request under DFARS 252.211-7003. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. DFARS 252.225-7048 governs the handling of controlled technical data. The solicitation number is SPE4A6-26-T-12TL, issued on August 5, 2026, with responses due August 13, 2026. Performance is designated for Hill AFB, Utah, under the Department of Defense’s ASC Commodities Division, with Priscilla Holmes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of a gasket item identified by NSN 5330-01-557-0920 and part number X-113BT, with a requirement of 600 feet delivered in continuous lengths. The unit of issue is the foot, with the order unit being a roll of 500 feet, and delivery must occur within five days of award. Delivery is FOB origin, and the quantity allowable variance is plus 10 percent with zero tolerance for reduction. Inspection and acceptance are both conducted at the destination. Packaging must comply with MIL-STD-2073-1E, using black plastic for preservation, with no cushioning or dunnage, and markings must follow MIL-STD-129 with no special handling codes. The item is not classified as hazardous, but shipment must be sent by the fastest traceable method, explicitly prohibiting parcel post. The destination for delivery is the Distribution Management Office at MCLB Albany, Georgia. The gasket is sourced from approved vendors including Trim-Lok Inc, Charleston Rubber & Gasket Co Inc, and General Dynamics Land Systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The contract is issued under solicitation SPE7L1-26-T-916W, with a response deadline of August 17, 2026, and an original required delivery date of August 6, 2026. The NAICS code is 339991, and the contracting activity falls under the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
This contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1000 and part number 2403/0252, supplied by JCB INC, under solicitation SPE7L1-26-T-917D. The item must be delivered in strict compliance with MIL-DTL-117, Type II, Class C, Style 1 packaging standards, requiring medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling with code 20–20 “Do not bend,” and palletization as outlined in DLA packaging requirements. The delivery is FOB origin with zero variance tolerance, inspection and acceptance occurring at the destination, and shipment must be traceable—parcel post is prohibited. The required delivery date is August 3, 2026, with a 20-day lead time, and the item must be sent to the defense logistics agency warehouse in Johnston, Iowa, under government control codes and shipping instructions. The contract integrates referenced technical and quality standards from the DLA Master List, and includes compliance requirements for hazardous materials packaging under IP025, along with data handling protocols for covered defense information. The unit of issue is each (EA), priced at $1.00, with a total contract value of $1.00. Special handling instructions include preservation method 33, dry climate control, and specific container types with no cushioning material. The point of contact is Kristie Fown, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. This procurement is categorized under NAICS 336310, managed by the Department of Defense’s Land Supply Chain, and is subject to federal acquisition regulations and DLA-specific administrative protocols, including government-only metadata fields and traceability markers.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-26-T-917U
This contract is for the procurement of one bracket, angle with NSN 5340-01-537-5042 and part number 3471822 from Oshkosh Defense LLC, under solicitation SPE7L1-26-T-917U. The item is a critical application component required for delivery within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Delivery must be made to NMCB 4 at Port Hueneme, California, with shipping required via traceable means only—parcel post is prohibited. All packaging must comply with DLA’s master requirements, including MIL-STD-129 for labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under Fed-Std-313, with DLA’s technical and quality requirements taking precedence over any commercial standards. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved. The contract enforces strict compliance with DLA packaging and procurement protocols, including specific unit of issue and quantity per unit pack details, and requires palletization in accordance with RP001. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with the delivery destination and shipping instructions clearly defined. The required delivery date is July 15, 2026, and all documentation must reflect the approved solicitation revision in effect at the award date. The item must be marked and tracked using the provided traceable control number and project identifier, and government-specific coding such as IPD 13 and DIC A4A must be applied. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332510 for metal fabrication.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-Q-1455
This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-917S
The contract is for the procurement of 200 units of a PLUNGER, DETENT with NSN 5340-00-782-1762 under solicitation SPE7L1-26-T-917S, issued by the Department of Defense through the Land Supply Chain office. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special coding. The item must conform to Technical Data Package Rev A, referenced to drawing number 19207-10949808 Revision B dated January 1, 1999, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract prohibits the use of Class I ozone-depleting chemicals in any form and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Inspection and acceptance criteria follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are set at VII, IV, and II respectively. A Certificate of Conformance is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. The end recipient is the Government of Israel Ministry of Defense, with delivery coordinated through the freight forwarder InterGlobal FWRD SV Inc Co G&B PKG Co in Jersey City, NJ, and the primary point of contact is Forsan Saad. The required delivery date is June 1, 2026, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. Configuration control and potential deviations require an Engineering Change Proposal or formal variance request, and covered defense information protocols apply.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-917T
The item specified is a mounting bracket identified by NSN/Part Number 5340-01-628-3279, with a quantity of eight units required under purchase request 7016687716. The delivery is due within 77 days after award, and the solicitation is issued under contract number SPE7L1-26-T-917T, with a response deadline of August 17, 2026. The procurement is governed by Defense Logistics Agency requirements, including technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, restricting any transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization are permitted to handle the technical data. The place of performance is in New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s Land Supply Chain, and inquiries should be directed to Isabelle Szulewska at the provided contact information.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916U
The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Spring Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916L
This contract specifies the procurement of two helical compression springs with part number 41001657 and NSN 5360-00-566-6315, furnished under solicitation SPE7L1-26-T-916L. The springs must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging levels, and marking guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the springs, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The items are to be delivered FOB origin within 20 days, with no tolerance for quantity variance. Delivery is to the Taiwan Army Zuo-Ying Ammunition Sub-Depot in Kaohsiung City, with no special marking required beyond standard military specifications. The contract mandates that all supplies be shipped without Government identification if rejected, and applies Covered Defense Information requirements as applicable. The unit of issue is each, with a total price of $2.00 for two units, and the freight forwarding and transportation procedures follow DLAD Proc Notes C19 and C20. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. The original required delivery date is August 7, 2026, and the contract is governed by the DoD’s authorized procurement framework, incorporating all relevant DLA packaging, inspection, and acceptance protocols applicable at origin. The NAICS code is 332510, and the solicitation is open to federal contractors under a standard commercial item acquisition process.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE7L1-26-T-917B
The contract is for the procurement of two fuel system valves, identified by NSN 2910016681633 and part number 8M0121389, supplied by Brunswick Corp under solicitation SPE7L1-26-T-917B. Delivery is required within 20 days to the NAVSCOLEOD facility in Niceville, Florida, with shipment to be made by the fastest traceable means, excluding parcel post. The items are to be delivered FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization governed by DLA packaging standards. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The unit price and total cost are not specified in the provided text, and the original required delivery date is August 3, 2026. The contract is managed under DoD unit of issue protocols, and all government-specific codes, including IPD, DIC, and FREIGHT SHIPPING ADDRESS, are for official use only. Point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details