Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLAMP, LOOP

Active
SPE7L4-26-U-1070Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.

General Info

Procure 33 CLAMP, LOOP units by Aug 24, 2026, with 116-day delivery, ITAR/EAR controls, and DLA certification required.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-U-1070 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
HEATHER KESSLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,LOOP
CLAMP, LOOP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-284-2451 Quantity: 33 EA Purchase Request: 1000238182QTY: 33 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-943F
The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9350
The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14LH
The contract pertains to the procurement of 395 straight headless pins identified by NSN 5315-01-269-9299 under solicitation SPE4A6-26-T-14LH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 155 days after award, and responses must be submitted by August 17, 2026. The item falls under NAICS code 332510 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and packaging must adhere to DLA standards. Inspection and acceptance occur at the origin, and non-accepted supplies must have all government identification removed. Physical marking of the bare items is required, and export control regulations under ITAR or EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract enforces tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with additional provisions for the safeguarding of covered defense information. Technical data governing the item cannot be disclosed to foreign persons, including employees of U.S. companies or subsidiaries, without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to controlled data is limited to contractors who have successfully completed the DLA Export-Controlled Technical Data Questionnaire and training via the designated DLA website. The place of performance is Tinker Air Force Base, Oklahoma, with Summer Allen as the primary point of contact for inquiries. The procurement is classified as federal and does not specify a set-aside type, and all documentation must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, V
Solicitation # SPE7L4-26-T-6215
The item is a cushion for a seat back, designated with NSN 2540-01-659-1000, and is being procured in a quantity of one unit under purchase request 7017784238. The solicitation number is SPE7L4-26-T-6215, posted on August 9, 2026, with responses due by August 20, 2026. The contract falls under NAICS code 336360 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 10 days after delivery order issuance. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure of technical information to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training on handling DOD export-controlled data, and have been formally approved by DLA. DFARS 252.225-7048 governs the management of this controlled information, and the primary point of contact for inquiries is Anna-Rachelle Betts, reachable via email or phone listed in the contract metadata.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-6216
The contract pertains to the procurement of two units of a box and accessories item identified by NSN 2540-01-734-9195 under solicitation SPE7L4-26-T-6216, with a required delivery date of August 6, 2026, and a 20-day delivery window from the order date. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951, and must be packaged in accordance with MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials meeting TQ requirement IP025 and non-hazardous materials following FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must be commercially compliant, palletized per DLA standards, and clearly marked with the correct Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The shipment must be sent by the fastest traceable means—parcel post is prohibited—and must be addressed to the designated military facility in Imperial Beach, California, with the RDD 777 identifier. The contractor is Buyers Products Company DBA 9X737 with part number 1705160, and the contract is issued under a DoD unit of issue as defined by the official DLA unit conversion table. All documentation and reporting must include the designated government control codes and project identifiers for administrative tracking.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-26-U-1073
The contract specifies the procurement of a vehicular door latch with NSN 2540-01-609-9677 and part number MIL-2-16924-23, under solicitation SPE7L4-26-U-1073, targeting a total small business set-aside with a NAICS code of 336390. The requirement is for 29 units at a unit price of $29.00, with a total estimated value of $841.00, and delivery must be completed within 80 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129 for marking and labeling, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA standards overriding ASTM where conflicts exist. Palletization and packaging must adhere to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense’s LSO Combat Vehicles and Armament office under a federal solicitation posted on August 9, 2026, with responses due by August 24, 2026. The point of contact is Heather Kessler, and the unit of issue is each (EA), with the quantity per unit pack defined as one. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and the applicable revision is determined by the solicitation issue date. Delivery is to be made without government identification removed from non-accepted supplies, and the unit of issue and purchase unit are to be aligned with the official DLA unit of issue documentation. The contract is managed through DLA’s eProcurement systems and the DIBBS platform for solicitation participation.
Other Motor Vehicle Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 336211
New
DIBBS
PLATE, SKIRTING, VEHICLE
Solicitation # SPE7L4-26-U-1068
The contract pertains to the procurement of 30 units of a plate, skirting, vehicle suspension with NSN 2510-01-421-4593 under solicitation SPE7L4-26-U-1068. Delivery is required within 89 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129 with the special marking code ZZ indicating an upward arrow, open this side, and mandatory mechanical handling. Technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and unspecified attributes are treated as major with corresponding verification levels or AQLs. The item is classified as a critical application item and is subject to CMMC Level 2 Self-Assessment requirements. Material color is green unless otherwise indicated. The supplier is LOC PERFORMANCE PRODUCTS LLC with part number 12365235, and the contract is a DLA Direct, CONUS procurement using the DoD unit of issue. All cybersecurity and packaging obligations are mandatory and enforceable.
Motor Vehicle Body Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L4-26-U-1078
The contract is for the procurement of 5,349 units of a RING, WIPER with NSN 5330-01-493-5202 under solicitation SPE7L4-26-U-1078, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Deliveries are required within 97 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, as stipulated for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The product must be free of asbestos as defined by FED-STD-313 and palletization must meet DLA packaging standards. Sampling and inspection for conformance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an approved zero-based sampling plan, with critical, major, and unspecified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105 or ASQ Z1.4 may only be used to determine sample size, not acceptance criteria. Hazardous materials packaging and shipping must comply with IP025. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage. The supplier for this item is Greene Tweed & Co Inc, part number 87582. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the contract is subject to standard DoD procurement procedures and unit of issue conversions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L4-26-U-1071
This contract is for the procurement of 96 vehicular mirror heads under solicitation SPE7L4-26-U-1071, with a unit price of $96.00 per item and a total value of $9,216. The delivery timeline is 80 days from the award date, with delivery terms set at FOB origin, meaning the supplier is responsible for the item until it leaves their facility. The quantity is fixed with no variance permitted—neither plus nor minus zero percent—and inspection and acceptance occur at the destination. All items must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, specifying packaging methods, materials, and unit container types, while marking must adhere to MIL-STD-129 with no special marking required. The item is identified by NSN 2540-01-706-8157 and part number 2638846, supplied by Polaris Sales Inc. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements but not exempting the product from meeting performance standards; any substitute chemicals must be pre-approved unless already authorized by the specification. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), and the contract is issued under a simplified acquisition process with a response deadline of August 24, 2026, and a posted date of August 9, 2026. The responsible agency is the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with Karryn Hoston as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332912
New
DIBBS
CONTROL, REEL
Solicitation # SPE7L4-26-T-6212
The contract pertains to the procurement of CONTROL, REEL with NSN 8130-01-460-6614 and part number 12364610-15, for a quantity of 8 units at a unit price of $8.00, totaling $64.00. Delivery is required within 165 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The sole delivery address is the DLA Distribution facility at New Cumberland, PA, with transport governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 25, 2027, with a need ship date of February 2, 2027. The solicitation number is SPE7L4-26-T-6212, issued by the Department of Defense under the NAICS code 332912, with Anna-Rachelles Betts as the primary point of contact. Proprietary data and insufficient competitive information are noted, and the contract references DLA’s authorized unit of issue and associated conversion standards.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This contract, issued under solicitation SPE7L4-26-U-1075, is a total small business set-aside for the procurement of one item identified by NSN 2910-01-485-7711 and part number 75290-01, with an estimated quantity of 149 units at a unit price of $149.00, totaling $22,201. The contract mandates strict adherence to DLA Packaging Requirements for Procurement, including compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Delivery is required FOB origin within 74 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each, and palletization must conform to DLA standards. The item is covered under DLA Direct, CONUS, and is subject to all applicable federal acquisition regulations. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament under NAICS code 336310, with primary point of contact Heather Kessler available for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-U-1072
The contract pertains to the procurement of a BRACKET, ANGLE with NSN 5340-01-481-8190 and part number 23-09130-007, under solicitation SPE7L4-26-U-1072, issued by the Department of Defense’s LSO Combat Vehicles and Armament office. The requirement is for 129 units, each priced at $129.00, totaling $16,641.00, with delivery expected within 116 days FOB origin and no tolerance for quantity variance. The item is covered under DLA Direct, CONUS, with inspection and acceptance points set at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and adhere strictly to MIL-STD-129 for marking and labeling. If the material is non-hazardous, it must be commercially packaged per ASTM D3951, but if hazardous per FED-STD-313, packaging must follow TQ requirement IP025. All packaging and palletization is governed by RP001, DLA Packaging Requirements for Procurement. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 24, 2026, and was posted on August 9, 2026. Primary point of contact is Heather Kessler, reachable via email and phone as provided.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BALL JOINT
Solicitation # SPE7L4-26-U-1080
The contract pertains to a Parts Kit, Ball Joint, identified by NSN 2530-01-668-5704 and part number 4364830, with a quantity of 12 kits delivered under solicitation SPE7L4-26-U-1080. Delivery is required within 75 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and conform to DLA packaging requirements, with marking in accordance with MIL-STD-129. The unit of issue is KT (kit), and all preservation and packaging methods must adhere to the specified military standards using designated materials and codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract is issued by the Department of Defense under LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact. This is a direct DLA acquisition within the continental United States, and the solicitation response deadline is August 24, 2026.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE7L4-26-T-6219
The contract pertains to the procurement of a cable assembly designated as P/N 4354584 with NSN 6150016865220, under solicitation SPE7L4-26-T-6219, issued by the Department of Defense’s DLA for the Combat Vehicles and Armament office. Seven units are required with a fixed unit price of $7.00, resulting in a total contract value of $49.00, and delivery must occur within 165 days from the order date, with the original required delivery date set for May 15, 2027. The product must be delivered FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and marking must strictly comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following specified DLA guidelines. The goods are to be shipped to DLA Distribution Albany at the designated Transportation Officer address in Albany, Georgia, in accordance with DLAD Proc Notes C19 and C20 for transportation and first destination handling. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the NAICS code is 335311, indicating classification under Electric Wire and Cable Manufacturing.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details